Ladhani Metal Corporation
Girgaon, Mumbai, Maharashtra
GST No. 27AOZPB3027K1ZM
TrustSEAL Verified
Call 07942537951 91% Response Rate
SEND EMAIL
Product Details:
| Carbon Grade | SA 283 |
| Thickness | 8 mm |
| Application | Boiler, Structure, Tank, General Fabrication, Shipbuilding |
| Width | 1250 mm |
| Length | 2440 mm |
| Country Of Origin | India |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | SA 283 Grade A, Grade B, Grade C, Grade D |
SA 283 Grade D is the highest strength grade within the SA 283 carbon steel specification, designed for structural-quality applications that demand improved tensile and yield strength while maintaining good weldability and toughness. Supplied in plate and sheet form (sheet cut from plate), SA 283 Grade D is suitable for general fabrication, construction, and industrial applications operating under normal atmospheric conditions where higher load-bearing capacity is required.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SA 283 carbon steel plates and sheets, including SA 283 Grade D. Our materials are sourced from approved mills and supplied in as-rolled or normalized condition, ensuring consistent quality, dimensional accuracy, and full compliance with ASME / ASTM standards for structural and pressure-related applications.
Forms Available: plate, sheet (cut from plate)
Grades Available: SA 283 Grade A, Grade B, Grade C, Grade D
Chemical Composition (% – typical limits, vary by grade):
• Carbon (C): up to 0.27
• Manganese (Mn): up to 0.90
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.040
• Silicon (Si): ≤ 0.40
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: approx. 485 – 620 MPa
• Yield Strength: approx. 230 MPa
• Elongation: approx. 18 – 22%
Key Features:
• Higher strength compared to Grades A, B, and C
• Good weldability with standard welding procedures
• Uniform mechanical properties across thickness ranges
• Suitable for heavier structural and load-bearing applications
Material Characteristics:
SA 283 Grade D carbon steel provides enhanced strength while retaining acceptable ductility and ease of fabrication. It is well suited for structural components that experience higher stresses but do not require the performance of high-strength low-alloy steels. The balanced chemistry ensures stable mechanical behavior and reliable service performance.
Conclusion:
Ladhani Metal Corporation supplies high-quality SA 283 Grade D carbon steel plates and sheets for demanding structural and fabrication applications. With higher strength, dependable weldability, and compliance with international standards, SA 283 Grade D is an economical and practical choice for general engineering needs requiring improved load capacity. For customized dimensions, grade comparison, or technical support, contact Ladhani Metal Corporation.
#SA283 #SA283CarbonSteel #ASTMA283 #CarbonSteelPlate #CarbonSteelSheet #MildSteelPlate #StructuralSteel #BoilerSteel #PressureVesselSteel #LowCarbonSteel #SteelPlates #SteelSheets #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableSteel #SteelForConstruction #SteelForFabrication #SteelForBoilers #HeatExchangerSteel #ShipbuildingSteel #TankFabrication #SteelForStorageTanks #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #CarbonSteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #HeavyEngineering #IndustrialMaterials #StructuralPlates #CarbonSteelProducts #SteelStockist #SteelTrading #SteelBusiness #SteelApplications #IndustrialFabrication #SteelEngineering #ASTMSteel #ASMESteel #CarbonSteelIndustry #SteelSolutions #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai
Product Details:
| Carbon Grade | SA 283 |
| Carbon Level | Low Carbon |
| Thickness | 8 mm |
| Application | Tank, Structure, General Fabrication, Boiler, Shipbuilding |
| Width | 1250 mm |
| Length | 3000 mm |
| Country Of Origin | India |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | SA 283 Grade A, Grade B, Grade C, Grade D |
SA 283 Grade C is a low to intermediate tensile strength carbon steel grade widely used for structural-quality applications that require higher strength than Grades A and B while maintaining good ductility and weldability. Supplied in plate and sheet form (sheet cut from plate), SA 283 Grade C is commonly selected for general fabrication and construction where reliable mechanical performance is required under normal atmospheric conditions. It offers uniform strength, ease of forming, and dependable service life, making it one of the most popular grades in the SA 283 specification.
Ladhani Metal Corporation is a manufacturer, supplier, and exporter of SA 283 carbon steel plates and sheets, including SA 283 Grade C. Our materials are sourced from approved mills and supplied in as-rolled or normalized condition, ensuring consistent quality, dimensional accuracy, and full compliance with ASME / ASTM standards for structural and pressure-related applications.
Forms Available: plate, sheet (cut from plate)
Grades Available: SA 283 Grade A, Grade B, Grade C, Grade D
Chemical Composition (% – typical limits, vary by grade):
• Carbon (C): up to 0.28
• Manganese (Mn): up to 0.90
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.040
• Silicon (Si): ≤ 0.40
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: approx. 415 – 550 MPa
• Yield Strength: approx. 205 MPa
• Elongation: approx. 20 – 24%
Material Characteristics:
SA 283 Grade C carbon steel offers a well-balanced combination of strength and ductility, making it ideal for structural components that require improved load-bearing capacity without sacrificing ease of fabrication. This grade is the most commonly used within the SA 283 series due to its versatility and consistent performance in general engineering applications.
Conclusion:
Ladhani Metal Corporation supplies premium-quality SA 283 Grade C carbon steel plates and sheets for a wide range of structural and fabrication applications. With dependable mechanical properties, excellent weldability, and compliance with international standards, SA 283 Grade C remains a practical and economical choice for general engineering requirements. For sizing, grade comparison, or technical assistance, contact Ladhani Metal Corporation.
#SA283 #SA283CarbonSteel #ASTMA283 #CarbonSteelPlate #CarbonSteelSheet #MildSteelPlate #StructuralSteel #BoilerSteel #PressureVesselSteel #LowCarbonSteel #SteelPlates #SteelSheets #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableSteel #SteelForConstruction #SteelForFabrication #SteelForBoilers #HeatExchangerSteel #ShipbuildingSteel #TankFabrication #SteelForStorageTanks #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #CarbonSteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #HeavyEngineering #IndustrialMaterials #StructuralPlates #CarbonSteelProducts #SteelStockist #SteelTrading #SteelBusiness #SteelApplications #IndustrialFabrication #SteelEngineering #ASTMSteel #ASMESteel #CarbonSteelIndustry #SteelSolutions #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai
Product Details:
| Carbon Grade | SA 283 |
| Carbon Level | Low Carbon |
| Thickness | 5 mm |
| Application | General Fabrication |
| Width | 1000 mm |
| Country Of Origin | India |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades: | SA 283 Grade A, Grade B, Grade C, Grade D |
SA 283 is a low and intermediate tensile strength carbon steel specification intended for structural-quality plates used in general fabrication and construction. It offers good weldability, formability, and uniform mechanical properties, making it suitable for applications where moderate strength and reliable performance are required under normal atmospheric conditions. SA 283 is commonly supplied in Grades A, B, C, and D, with increasing strength levels across the grades.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SA 283 carbon steel plates and sheets. Our SA 283 materials are sourced from approved mills and supplied in as-rolled or normalized condition, ensuring consistent quality, dimensional accuracy, and compliance with ASME / ASTM standards for structural and pressure-related applications.
Forms Available: plate, sheet (cut from plate)
Grades Available: SA 283 Grade A, Grade B, Grade C, Grade D
Chemical Composition (% – typical limits, vary by grade):
• Carbon (C): up to 0.23 – 0.28
• Manganese (Mn): up to 0.90
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.040
• Silicon (Si): ≤ 0.40
Mechanical Properties (Typical, vary by grade and thickness):
• Tensile Strength: 310 – 550 MPa
• Yield Strength: 165 – 230 MPa
• Elongation: 20 – 27%
Applications:
• General structural fabrication
• Storage tanks and non-critical pressure vessels
• Industrial buildings and supports
• Bridges and civil engineering structures
• Base plates, frames, and fabricated components
• Oil & gas and power plant auxiliary structures
Conclusion:
Ladhani Metal Corporation supplies high-quality SA 283 carbon steel plates and sheets suitable for a wide range of structural and fabrication applications. For grade selection, customized sizes, or technical assistance, contact Ladhani Metal Corporation.
#SA283 #SA283CarbonSteel #ASTMA283 #CarbonSteelPlate #CarbonSteelSheet #MildSteelPlate #StructuralSteel #BoilerSteel #PressureVesselSteel #LowCarbonSteel #SteelPlates #SteelSheets #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableSteel #SteelForConstruction #SteelForFabrication #SteelForBoilers #HeatExchangerSteel #ShipbuildingSteel #TankFabrication #SteelForStorageTanks #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #CarbonSteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #HeavyEngineering #IndustrialMaterials #StructuralPlates #CarbonSteelProducts #SteelStockist #SteelTrading #SteelBusiness #SteelApplications #IndustrialFabrication #SteelEngineering #ASTMSteel #ASMESteel #CarbonSteelIndustry #SteelSolutions #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai
Product Details:
| Carbon Grade | SA 283 |
| Carbon Level | Low Carbon |
| Thickness | 6 mm |
| Application | Boiler, Shipbuilding, General Fabrication, Tank, Structure |
| Width | 1000 mm |
| Length | 3000 mm |
| Country Of Origin | India |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | SA 283 Grade A, Grade B, Grade C, Grade D |
SA 283 Grade B is a low to intermediate tensile strength carbon steel grade intended for structural-quality applications requiring slightly higher strength than Grade A while maintaining good ductility and fabricability. Supplied in plate and sheet form (sheet cut from plate), SA 283 Grade B is suitable for general fabrication, construction, and industrial uses under normal atmospheric conditions. It offers reliable mechanical performance, good weldability, and consistent properties across thickness ranges.
Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of SA 283 carbon steel plates and sheets, including SA 283 Grade B. Our materials are procured from approved mills and supplied in as-rolled or normalized condition, ensuring dimensional accuracy, uniform quality, and compliance with ASME / ASTM standards for structural and pressure-related applications.
Forms Available: plate, sheet (cut from plate)
Grades Available: SA 283 Grade A, Grade B, Grade C, Grade D
Chemical Composition (% – typical limits, vary by grade):
• Carbon (C): up to 0.25
• Manganese (Mn): up to 0.90
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.040
• Silicon (Si): ≤ 0.40
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: approx. 380 – 485 MPa
• Yield Strength: approx. 180 MPa
• Elongation: approx. 22 – 25%
Key Features:
• Good weldability with standard welding procedures
• Balanced strength and ductility for structural fabrication
• Uniform mechanical properties across thicknesses
• Cost-effective solution for medium-duty structures
Material Characteristics:
SA 283 Grade B carbon steel provides an improved strength level compared to Grade A while retaining ease of fabrication. This grade is well suited for structural components where moderate load-bearing capacity is required without the need for high-strength or alloy steels. Its consistent chemistry and mechanical properties make it suitable for a wide range of fabricated products.
Conclusion:
Ladhani Metal Corporation supplies high-quality SA 283 Grade B carbon steel plates and sheets designed for dependable structural and fabrication applications. With a practical balance of strength, weldability, and cost efficiency, SA 283 Grade B is a preferred choice for general engineering needs. For customized sizes, grade selection, or technical guidance, contact Ladhani Metal Corporation.
#SA283 #SA283CarbonSteel #ASTMA283 #CarbonSteelPlate #CarbonSteelSheet #MildSteelPlate #StructuralSteel #BoilerSteel #PressureVesselSteel #LowCarbonSteel #SteelPlates #SteelSheets #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableSteel #SteelForConstruction #SteelForFabrication #SteelForBoilers #HeatExchangerSteel #ShipbuildingSteel #TankFabrication #SteelForStorageTanks #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #CarbonSteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #HeavyEngineering #IndustrialMaterials #StructuralPlates #CarbonSteelProducts #SteelStockist #SteelTrading #SteelBusiness #SteelApplications #IndustrialFabrication #SteelEngineering #ASTMSteel #ASMESteel #CarbonSteelIndustry #SteelSolutions #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai
Product Details:
| Carbon Grade | SA 283 |
| Carbon Level | Low Carbon |
| Thickness | 5 mm |
| Application | Tank, Structure, Boiler, General Fabrication |
| Width | 1000 mm |
| Length | 2440 mm |
| Country Of Origin | India |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | SA 283 Grade A, Grade B, Grade C, Grade D |
SA 283 Grade A is a low tensile strength carbon steel grade intended for structural-quality applications where moderate strength, good ductility, and excellent fabricability are required. Supplied in plate and sheet form (sheet cut from plate), SA 283 Grade A is widely used in general fabrication and construction projects operating under normal atmospheric conditions. This grade offers reliable mechanical performance, ease of welding, and uniform properties across thicknesses, making it suitable for non-critical structural and pressure-related applications.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SA 283 carbon steel plates and sheets, including SA 283 Grade A. Our materials are sourced from approved mills and supplied in as-rolled or normalized condition, ensuring consistent quality, dimensional accuracy, and full compliance with ASME / ASTM standards.
Forms Available: plate, sheet (cut from plate)
Grades Available: SA 283 Grade A, Grade B, Grade C, Grade D
Chemical Composition (% – typical limits, vary by grade):
• Carbon (C): up to 0.23
• Manganese (Mn): up to 0.90
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.040
• Silicon (Si): ≤ 0.40
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: approx. 310 – 415 MPa
• Yield Strength: approx. 165 MPa
• Elongation: approx. 25 – 27%
Key Features:
• Excellent weldability without special preheating
• High ductility and good formability for bending and rolling
• Uniform mechanical properties across thickness ranges
• Cost-effective material for light structural applications
Material Characteristics:
SA 283 Grade A carbon steel is specifically designed for structural-quality applications where low strength requirements and high ductility are preferred. Compared to higher grades, Grade A offers lower tensile strength but superior ease of fabrication, making it ideal for components that require forming, shaping, and welding without the need for complex procedures.
Conclusion:
Ladhani Metal Corporation supplies premium-quality SA 283 Grade A carbon steel plates and sheets for dependable structural and fabrication applications. With excellent formability, consistent mechanical properties, and adherence to international standards, SA 283 Grade A remains an economical and practical choice for general engineering needs. For sizing, grade comparison, or technical support, contact Ladhani Metal Corporation.
#SA283 #SA283CarbonSteel #ASTMA283 #CarbonSteelPlate #CarbonSteelSheet #MildSteelPlate #StructuralSteel #BoilerSteel #PressureVesselSteel #LowCarbonSteel #SteelPlates #SteelSheets #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableSteel #SteelForConstruction #SteelForFabrication #SteelForBoilers #HeatExchangerSteel #ShipbuildingSteel #TankFabrication #SteelForStorageTanks #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #CarbonSteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #HeavyEngineering #IndustrialMaterials #StructuralPlates #CarbonSteelProducts #SteelStockist #SteelTrading #SteelBusiness #SteelApplications #IndustrialFabrication #SteelEngineering #ASTMSteel #ASMESteel #CarbonSteelIndustry #SteelSolutions #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai
Product Details:
| Grade | SA 387 |
| Thickness | 6 mm |
| Material Type | Chrome Moly Steel |
| Size (W x L) | 1250 x 3000 |
| Application | Shipbuilding, Engineering, Pressure Vessel, Boiler, Automobile |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | SA 387 Grade 5, Grade 11, Grade 22, Grade 91 |
SA 387 Grade 11 is a chromium-molybdenum alloy steel grade developed for pressure vessels and equipment operating at elevated temperatures. Supplied in plate and sheet form (sheet cut from plate), SA 387 Grade 11 alloy steel provides excellent high-temperature strength, good oxidation resistance, and improved creep resistance, making it suitable for severe service conditions in power plants, refineries, and petrochemical industries.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SA 387 alloy steel plates and sheets, including SA 387 Grade 11. Our materials are sourced from approved mills and supplied in normalized and tempered condition, ensuring consistent quality, dimensional accuracy, and full compliance with ASME / ASTM standards for pressure vessel and high-temperature applications.
Forms Available: plate, sheet (cut from plate)
Grades Available: SA 387 Grade 5, Grade 9, Grade 11, Grade 12, Grade 22
Chemical Composition (% – as per SA 387 Grade 11 specification):
• Carbon (C): 0.05 – 0.15
• Manganese (Mn): 0.30 – 0.60
• Silicon (Si): 0.50 max
• Chromium (Cr): 1.00 – 1.50
• Molybdenum (Mo): 0.45 – 0.65
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: approx. 415 – 585 MPa
• Yield Strength: approx. 205 MPa
• Elongation: approx. 20 – 24%
Key Features:
• Excellent strength and stability at elevated temperatures
• Improved oxidation and corrosion resistance
• Enhanced creep resistance for long-term service
• Good weldability with proper preheating and PWHT
• Reliable mechanical performance under pressure
• Suitable for high-temperature and high-pressure environments
Conclusion:
Ladhani Metal Corporation supplies premium-quality SA 387 Grade 11 alloy steel plates and sheets for demanding high-temperature and pressure service applications. With verified chemical composition, dependable mechanical properties, and strict compliance with international standards, SA 387 Grade 11 remains a preferred material for critical industrial equipment. For customized sizes, grade comparison, or technical assistance, contact Ladhani Metal Corporation.
#SA387 #SA387AlloySteel #ASTMA387 #ChromiumMolybdenumSteel #CrMoSteel #AlloySteelPlate #AlloySteelSheet #PressureVesselSteel #BoilerSteel #HighTemperatureSteel #HighPressureSteel #HeatResistantSteel #RefinerySteel #PetrochemicalSteel #PowerPlantSteel #OilAndGasSteel #ThermalPlantSteel #ReactorSteel #HeatExchangerSteel #HeavyEngineeringSteel #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableAlloySteel #SteelPlates #SteelSheets #AlloySteelProducts #SteelForRefineries #SteelForBoilers #SteelForPressureVessels #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #AlloySteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialFabrication #PowerGenerationSteel #EnergySectorSteel #ASTMSteel #ASMESteel #AlloySteel Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai
Product Details:
| Grade | SA 387 |
| Thickness | 5 mm |
| Material Type | Chrome Moly Steel |
| Size (W x L) | 1250 x 5000 mm |
| Application | Automobile, Shipbuilding, Engineering, Pressure Vessel, Boiler |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | SA 387 Grade 5, Grade 11, Grade 22, Grade 91 |
SA 387 Grade 5 is a chromium-molybdenum alloy steel grade designed for high-temperature and pressure service applications. Supplied in plate and sheet form (sheet cut from plate), SA 387 Grade 5 alloy steel is widely used in pressure vessels, boilers, and heat exchangers where reliable strength, good oxidation resistance, and stable performance at elevated temperatures are required. Its balanced chemical composition provides improved mechanical properties compared to carbon steels, making it suitable for demanding industrial environments.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SA 387 alloy steel plates and sheets, including SA 387 Grade 5. Our materials are sourced from approved mills and supplied in normalized and tempered condition, ensuring consistent quality, dimensional accuracy, and full compliance with ASME / ASTM standards for pressure vessel and high-temperature applications.
Forms Available: plate, sheet (cut from plate)
Grades Available: SA 387 Grade 5, Grade 9, Grade 11, Grade 12, Grade 22
Chemical Composition (% – as per SA 387 Grade 5 specification):
• Carbon (C): 0.05 – 0.15
• Manganese (Mn): 0.30 – 0.60
• Silicon (Si): 0.50 max
• Chromium (Cr): 0.50 – 1.00
• Molybdenum (Mo): 0.45 – 0.65
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: approx. 415 – 585 MPa
• Yield Strength: approx. 205 MPa
• Elongation: approx. 22 – 25%
Key Features:
• Good strength retention at elevated temperatures
• Resistance to oxidation and hydrogen-induced damage
• Good weldability with proper preheating and PWHT
• Improved creep resistance over carbon steels
• Stable mechanical properties under pressure service
• Suitable for moderate to high-temperature environments
Conclusion:
Ladhani Metal Corporation supplies premium-quality SA 387 Grade 5 alloy steel plates and sheets for high-temperature and pressure service applications. With reliable mechanical performance, excellent thermal stability, and adherence to international standards, SA 387 Grade 5 remains a practical and economical choice for demanding industrial requirements. For customized sizes, grade comparison, or technical assistance, contact Ladhani Metal Corporation.
#SA387 #SA387AlloySteel #ASTMA387 #ChromiumMolybdenumSteel #CrMoSteel #AlloySteelPlate #AlloySteelSheet #PressureVesselSteel #BoilerSteel #HighTemperatureSteel #HighPressureSteel #HeatResistantSteel #RefinerySteel #PetrochemicalSteel #PowerPlantSteel #OilAndGasSteel #ThermalPlantSteel #ReactorSteel #HeatExchangerSteel #HeavyEngineeringSteel #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableAlloySteel #SteelPlates #SteelSheets #AlloySteelProducts #SteelForRefineries #SteelForBoilers #SteelForPressureVessels #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #AlloySteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialFabrication #PowerGenerationSteel #EnergySectorSteel #ASTMSteel #ASMESteel #AlloySteel Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai
Product Details:
| Grade | SA 387 |
| Thickness | 10 mm |
| Material Type | Chrome Moly Steel |
| Size (W x L) | 1500 x 3000 |
| Application | Pressure Vessel, Boiler, Shipbuilding, Gears, Engineering, Automobile |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | SA 387 Grade 5, Grade 11, Grade 22, Grade 91 |
SA 387 Grade 22 is a chromium-molybdenum alloy steel grade developed for high-temperature and high-pressure service conditions. Supplied in plate and sheet form (sheet cut from plate), this material is extensively used in pressure vessels, boilers, and heat exchangers operating in elevated temperature environments. The 2.25% chromium and 1.0% molybdenum content provides excellent creep resistance, oxidation resistance, and long-term strength stability.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SA 387 Grade 22 alloy steel plates and sheets. All materials are sourced from approved mills and supplied in normalized and tempered condition, ensuring consistent quality, dimensional accuracy, and full compliance with ASME SA 387 / ASTM A387 standards for pressure equipment.
Forms Available: plate, sheet (cut from plate)
Grades Available: SA 387 Grade 5, Grade 9, Grade 11, Grade 12, Grade 22
Chemical Composition (% – SA 387 Grade 22):
• Carbon (C): 0.05 – 0.15
• Chromium (Cr): 2.00 – 2.50
• Molybdenum (Mo): 0.90 – 1.10
• Manganese (Mn): 0.30 – 0.60
• Silicon (Si): up to 0.50
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
Mechanical Properties (SA 387 Grade 22 – typical, vary by thickness):
• Tensile Strength: 415 – 585 MPa
• Yield Strength: minimum 205 MPa
• Elongation: minimum 18%
Key Features:
• Excellent strength retention at elevated temperatures
• Superior creep resistance for long-term service
• Good resistance to oxidation and hydrogen attack
• Designed for high-pressure and high-temperature environments
Material Characteristics:
SA 387 Grade 22 alloy steel is engineered for prolonged service under high temperature and pressure. The chromium content enhances oxidation and corrosion resistance, while molybdenum improves tensile strength and creep resistance. This grade offers a stable microstructure, making it suitable for critical pressure-retaining components.
Conclusion:
Ladhani Metal Corporation supplies high-quality SA 387 Grade 22 alloy steel plates and sheets for demanding industrial applications. With excellent chemical stability, reliable mechanical performance, and compliance with international standards, SA 387 Grade 22 remains a preferred material for high-temperature and high-pressure service. For customized sizes, technical assistance, or grade selection, contact Ladhani Metal Corporation.
#SA387 #SA387AlloySteel #ASTMA387 #ChromiumMolybdenumSteel #CrMoSteel #AlloySteelPlate #AlloySteelSheet #PressureVesselSteel #BoilerSteel #HighTemperatureSteel #HighPressureSteel #HeatResistantSteel #RefinerySteel #PetrochemicalSteel #PowerPlantSteel #OilAndGasSteel #ThermalPlantSteel #ReactorSteel #HeatExchangerSteel #HeavyEngineeringSteel #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableAlloySteel #SteelPlates #SteelSheets #AlloySteelProducts #SteelForRefineries #SteelForBoilers #SteelForPressureVessels #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #AlloySteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialFabrication #PowerGenerationSteel #EnergySectorSteel #ASTMSteel #ASMESteel #AlloySteel Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai
Product Details:
| Grade | SA 387 |
| Thickness | 5 mm |
| Material Type | Chrome Moly Steel |
| Size (W x L) | 1250 x 2500 mm |
| Application | Engineering, Shipbuilding, Pressure Vessel, Automobile, Boiler, Gears |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | SA 387 Grade 5, Grade 11, Grade 22, Grade 91 |
SA 387 Grade 91 is a high-strength chromium-molybdenum-vanadium alloy steel developed for high-temperature and high-pressure service. Supplied in plate and sheet form (sheet cut from plate), this grade is widely used in advanced power generation, petrochemical, and refinery applications where superior creep resistance, elevated temperature strength, and long-term microstructural stability are essential. The addition of vanadium and niobium (columbium) provides exceptional resistance to creep and thermal fatigue under prolonged service conditions.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SA 387 Grade 91 alloy steel plates and sheets. Our materials are sourced from approved mills and supplied in normalized and tempered condition, ensuring consistent quality, excellent mechanical performance, and full compliance with ASME SA 387 / ASTM A387 standards for critical pressure equipment.
Forms Available: plate, sheet (cut from plate)
Grades Available: SA 387 Grade 5, Grade 9, Grade 11, Grade 12, Grade 22, Grade 91
Chemical Composition (% – SA 387 Grade 91):
• Carbon (C): 0.08 – 0.12
• Chromium (Cr): 8.00 – 9.50
• Molybdenum (Mo): 0.85 – 1.05
• Manganese (Mn): 0.30 – 0.60
• Silicon (Si): 0.20 – 0.50
• Vanadium (V): 0.18 – 0.25
• Niobium (Nb): 0.06 – 0.10
• Nitrogen (N): 0.03 – 0.07
• Phosphorus (P): ≤ 0.020
• Sulphur (S): ≤ 0.010
Mechanical Properties (SA 387 Grade 91 – typical, vary by thickness):
• Tensile Strength: 585 – 760 MPa
• Yield Strength: minimum 415 MPa
• Elongation: minimum 18%
Key Features:
• Outstanding creep resistance at elevated temperatures
• Excellent strength retention up to approximately 600°C
• Superior resistance to thermal fatigue and oxidation
• High-pressure capability for critical service environments
• Requires controlled welding procedures with mandatory PWHT
• Long service life in severe operating conditions
Conclusion:
Ladhani Metal Corporation supplies premium-quality SA 387 Grade 91 alloy steel plates and sheets for the most demanding high-temperature and high-pressure applications. With superior chemical stability, exceptional mechanical performance, and compliance with international standards, SA 387 Grade 91 is the material of choice for critical service environments. For customized sizes, technical consultation, or grade comparison, contact Ladhani Metal Corporation.
#SA387 #SA387AlloySteel #ASTMA387 #ChromiumMolybdenumSteel #CrMoSteel #AlloySteelPlate #AlloySteelSheet #PressureVesselSteel #BoilerSteel #HighTemperatureSteel #HighPressureSteel #HeatResistantSteel #RefinerySteel #PetrochemicalSteel #PowerPlantSteel #OilAndGasSteel #ThermalPlantSteel #ReactorSteel #HeatExchangerSteel #HeavyEngineeringSteel #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableAlloySteel #SteelPlates #SteelSheets #AlloySteelProducts #SteelForRefineries #SteelForBoilers #SteelForPressureVessels #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #AlloySteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialFabrication #PowerGenerationSteel #EnergySectorSteel #ASTMSteel #ASMESteel #AlloySteel Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai
Product Details:
| Grade | SA 387 |
| Thickness | 10 mm |
| Material Type | Chrome Moly Steel |
| Size (W x L) | 1250 x 2500 mm |
| Application | Pressure Vessel, Engineering, Automobile, Boiler, Shipbuilding |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | SA 387 Grade 5, Grade 11, Grade 22, Grade 91 |
SA 387 is a chromium-molybdenum alloy steel specification primarily intended for high-temperature and pressure service applications. Supplied in plate and sheet form (sheet cut from plate), SA 387 alloy steel is widely used in pressure vessels, boilers, and heat exchangers where elevated temperature strength, oxidation resistance, and creep resistance are critical. The addition of chromium and molybdenum enhances mechanical strength, corrosion resistance, and long-term stability under severe operating conditions.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SA 387 alloy steel plates and sheets. Our SA 387 materials are sourced from approved mills and supplied in normalized and tempered condition, ensuring consistent quality, excellent mechanical performance, and full compliance with ASME / ASTM standards for pressure equipment and high-temperature applications.
Forms Available: plate, sheet (cut from plate)
Grades Available: SA 387 Grade 5, Grade 9, Grade 11, Grade 12, Grade 22
Chemical Composition (% – typical limits, vary by grade):
• Carbon (C): up to 0.15
• Chromium (Cr): 1.00 – 2.25
• Molybdenum (Mo): 0.45 – 1.00
• Manganese (Mn): up to 0.60
• Silicon (Si): up to 0.50
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
Mechanical Properties (Typical, vary by grade and thickness):
• Tensile Strength: approx. 415 – 690 MPa
• Yield Strength: approx. 205 – 415 MPa
• Elongation: approx. 18 – 25%
Key Features:
• Excellent strength at elevated temperatures
• Good resistance to oxidation and hydrogen attack
• Improved creep resistance for long-term service
• Good weldability with controlled preheat and post-weld heat treatment
• High toughness and structural stability
• Suitable for high-pressure and high-temperature environments
Conclusion:
Ladhani Metal Corporation supplies high-quality SA 387 alloy steel plates and sheets for critical high-temperature and pressure applications. With excellent mechanical strength, superior thermal stability, and compliance with international standards, SA 387 alloy steel remains a preferred choice for demanding industrial environments. For grade selection, customized dimensions, or technical assistance, contact Ladhani Metal Corporation.
#SA387 #SA387AlloySteel #ASTMA387 #ChromiumMolybdenumSteel #CrMoSteel #AlloySteelPlate #AlloySteelSheet #PressureVesselSteel #BoilerSteel #HighTemperatureSteel #HighPressureSteel #HeatResistantSteel #RefinerySteel #PetrochemicalSteel #PowerPlantSteel #OilAndGasSteel #ThermalPlantSteel #ReactorSteel #HeatExchangerSteel #HeavyEngineeringSteel #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableAlloySteel #SteelPlates #SteelSheets #AlloySteelProducts #SteelForRefineries #SteelForBoilers #SteelForPressureVessels #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #AlloySteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialFabrication #PowerGenerationSteel #EnergySectorSteel #ASTMSteel #ASMESteel #AlloySteel Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai