EN 10088-3 Ss Rod And Bars

We are a leading Manufacturer of en 10088-3 x6cr13 stainless steel rod, en 10088-3 x12crs13 stainless steel bar, en 10088-3 x6cr17 stainless steel rod, en 10088-3 x15cr13 stainless steel bar, en 10088-3 x39crmo17-1 stainless steel bar and en 10088-3 x6crmo17-1 stainless steel rod from Mumbai, India.

EN 10088-3 X6Cr13 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 200 / KgGet Latest Price

Product Details:

Grade	X6Cr13
Diameter	4 mm
Shape	Round
Length	10 ft (3 m)
Application	Marine, Machining, Construction, Railings
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X6Cr13 is a martensitic stainless steel grade designed for applications requiring a balanced combination of corrosion resistance, moderate to high strength, good hardness, and excellent machinability after heat treatment. Supplied in rod and bar form, X6Cr13 stainless steel is widely used in engineering and industrial components where mechanical strength and wear resistance are required along with basic corrosion resistance. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel semi-finished products, bars, rods, wire, sections, and bright products for general purposes.

Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088-3 X6Cr13 stainless steel rods and bars. We supply materials sourced from approved mills, ensuring consistent chemical composition, controlled mechanical properties, dimensional accuracy, and compliance with EN 10088-3 requirements.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X6Cr13):
• X – High-alloy steel
• 6 – Approx. 0.06% carbon content
• Cr13 – Approx. 13% chromium

Chemical Composition (% – typical limits for X6Cr13):
• Carbon (C): ≤ 0.08
• Chromium (Cr): 12.0 – 14.0
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on heat treatment):
• Tensile Strength: 650 – 800 MPa
• Yield Strength: ≥ 450 MPa
• Elongation: 12 – 15%
• Hardness: Can be increased significantly by quenching and tempering

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X6Cr13 stainless steel rods and bars in round, hex, square, and rectangular forms. With reliable mechanical properties, good corrosion resistance, and flexible heat treatment options, X6Cr13 stainless steel bar is a dependable choice for engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation.

#EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

Request
Callback

Yes! I am Interested

EN 10088-3 X12CrS13 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 205 / KgGet Latest Price

Product Details:

Shape	Flat
Grade	X12CrS13
Diameter	8 mm
Length	Cut Length
Standard	EN 10088
Manufactured / Supplied by	Ladhani Metal Corporation
Applications	Chemical processing equipment, fasteners, shafts, architectural and structural components

EN 10088-3 X12CrS13 is a free-machining martensitic stainless steel grade designed for applications requiring good corrosion resistance, excellent machinability, and moderate mechanical strength. The controlled addition of sulphur significantly improves machinability, making this grade especially suitable for high-speed machining and mass-produced precision components. Supplied in rod and bar form, X12CrS13 stainless steel is widely used in engineering and industrial applications where dimensional accuracy and productivity are critical.

Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088-3 X12CrS13 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, precise dimensions, and dependable performance.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X12CrS13):
• X – High-alloy steel
• 12 – Approx. 0.12% carbon content
• Cr13 – Approx. 13% chromium
• S – Sulphur added for improved machinability

Chemical Composition (% – typical limits):
• Carbon (C): 0.08 – 0.15
• Chromium (Cr): 12.0 – 14.0
• Sulphur (S): 0.15 – 0.35
• Silicon (Si): 0.20 – 1.00
• Manganese (Mn): ≤ 1.50
• Phosphorus (P): ≤ 0.040
• Nickel (Ni): ≤ 0.30

Mechanical Properties (Typical, depending on heat treatment):
• Tensile Strength: 650 – 850 MPa
• Yield Strength: ≥ 450 MPa
• Elongation: 10 – 14%
• Hardness: Can be increased by quenching and tempering

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X12CrS13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent machinability, reliable mechanical properties, and moderate corrosion resistance, X12CrS13 stainless steel is a dependable choice for engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X6Cr17 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 210 / KgGet Latest Price

Product Details:

Grade	X6Cr17
Diameter	3 mm
Shape	Round
Length	Cut to Size
Size	6mm
Application	Marine, Railings, Construction
en standard	EN 10088-3
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X6Cr17 is a martensitic stainless steel grade designed for applications requiring good corrosion resistance, moderate strength, and excellent hardness after heat treatment. Supplied in rod and bar form, X6Cr17 stainless steel is widely used in engineering and industrial components where wear resistance and mechanical performance are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X6Cr17 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X6Cr17):
• X – High-alloy steel
• 6 – Approx. 0.06% carbon content
• Cr17 – Approx. 17% chromium

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.08
• Chromium (Cr): 16.0 – 18.0
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015
• Nickel (Ni): ≤ 0.50

Mechanical Properties (Typical, depending on heat treatment):
• Tensile Strength: 500 – 700 MPa
• Yield Strength: ≥ 250 MPa
• Elongation: 12 – 15%
• Hardness: Can be increased significantly by quenching and tempering

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X6Cr17 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With reliable mechanical properties, moderate corrosion resistance, and heat-treatable performance, X6Cr17 stainless steel is a dependable choice for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X15Cr13 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 220 / KgGet Latest Price

Product Details:

Shape	Round
Grade	X15Cr13
Diameter	8 mm
Length	Cut Length
Standard	EN 10088
Manufactured / Supplied by	Ladhani Metal Corporation
Applications	automotive and railway parts, marine fittings, food processing equipment, and general fabrication

EN 10088-3 X15Cr13 is a martensitic stainless steel grade designed for applications requiring good corrosion resistance, high hardness, and moderate strength after heat treatment. Supplied in rod and bar form, X15Cr13 stainless steel is widely used in engineering and industrial components where wear resistance and mechanical performance are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X15Cr13 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X15Cr13):
• X – High-alloy steel
• 15 – Approx. 0.15% carbon content
• Cr13 – Approx. 13% chromium

Chemical Composition (% – typical limits):
• Carbon (C): 0.12 – 0.18
• Chromium (Cr): 12.0 – 14.0
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015
• Nickel (Ni): ≤ 0.50

Mechanical Properties (Typical, depending on heat treatment):
• Tensile Strength: 600 – 800 MPa
• Yield Strength: ≥ 400 MPa
• Elongation: 10 – 13%
• Hardness: Can be significantly increased by quenching and tempering

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X15Cr13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent hardness, reliable mechanical properties, and moderate corrosion resistance, X15Cr13 stainless steel is a dependable choice for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X39CrMo17-1 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 160 / KgGet Latest Price

Product Details:

Shape	Flat
Grade	X39CrMo17-1
Diameter	12 mm
Length	6 m
Standard	EN 10088
Manufactured / Supplied by	Ladhani Metal Corporation
Applications	Chemical processing equipment, fasteners, shafts, architectural and structural components

EN 10088-3 X39CrMo17-1 is a high-carbon martensitic stainless steel grade designed for applications requiring very high hardness, excellent wear resistance, and good corrosion resistance. The addition of molybdenum improves hardenability and enhances resistance to pitting and corrosion in mildly aggressive environments. Supplied in rod and bar form, X39CrMo17-1 stainless steel is widely used in engineering and industrial components where strength, durability, and cutting performance are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X39CrMo17-1 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X39CrMo17-1):
• X – High-alloy steel
• 39 – Approx. 0.39% carbon content
• CrMo17-1 – Approx. 17% chromium and 1% molybdenum

Chemical Composition (% – typical limits):
• Carbon (C): 0.36 – 0.42
• Chromium (Cr): 16.0 – 18.0
• Molybdenum (Mo): 0.80 – 1.20
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015
• Nickel (Ni): ≤ 0.50

Mechanical Properties (Typical, depending on heat treatment):
• Tensile Strength: 750 – 950 MPa
• Yield Strength: ≥ 500 MPa
• Elongation: 8 – 12%
• Hardness: Can be significantly increased by quenching and tempering

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X39CrMo17-1 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent hardness, wear resistance, and reliable corrosion performance, X39CrMo17-1 stainless steel is a dependable choice for demanding industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X6CrMo17-1 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 255 / KgGet Latest Price

Product Details:

Grade	X6CrMo17-1
Diameter	16 mm
Shape	Square
Length	12 ft (3.6 m)
Application	Construction, Railings, Machining, Marine, Fasteners
EN standard	EN 10088-3
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X6CrMo17-1 is a low-carbon martensitic stainless steel grade offering excellent corrosion resistance, good strength, and improved resistance to pitting and crevice corrosion due to the addition of molybdenum. Supplied in rod and bar form, X6CrMo17-1 stainless steel is widely used in engineering and industrial components where durability, corrosion resistance, and reliable mechanical performance are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X6CrMo17-1 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and dependable performance.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X6CrMo17-1):
• X – High-alloy steel
• 6 – Approx. 0.06% carbon content
• CrMo17-1 – Approx. 17% chromium and 1% molybdenum

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.08
• Chromium (Cr): 16.0 – 18.0
• Molybdenum (Mo): 0.80 – 1.20
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.50
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015
• Nickel (Ni): ≤ 0.50

Mechanical Properties (Typical, depending on heat treatment):
• Tensile Strength: 600 – 800 MPa
• Yield Strength: ≥ 350 MPa
• Elongation: 12 – 15%
• Hardness: Can be increased by quenching and tempering

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X6CrMo17-1 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, good mechanical strength, and heat-treatable properties, X6CrMo17-1 stainless steel rod is a dependable solution for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X55CrMo14 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 150 / KgGet Latest Price

Product Details:

Shape	Flat
Grade	X55CrMo14
Diameter	12 mm
Length	4 m
Standard	EN 10088
Manufactured / Supplied by	Ladhani Metal Corporation
Applications	Chemical processing equipment, fasteners, shafts, architectural and structural components

EN 10088-3 X55CrMo14 is a high-carbon martensitic stainless steel grade designed for applications requiring very high hardness, excellent wear resistance, and good corrosion resistance. The addition of molybdenum improves hardenability and corrosion resistance, particularly in mildly aggressive environments. Supplied in rod and bar form, X55CrMo14 stainless steel is widely used in engineering and industrial components where durability, cutting performance, and mechanical strength are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X55CrMo14 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X55CrMo14):
• X – High-alloy steel
• 55 – Approx. 0.55% carbon content
• CrMo14 – Approx. 14% chromium with molybdenum addition

Chemical Composition (% – typical limits):
• Carbon (C): 0.48 – 0.60
• Chromium (Cr): 14.0 – 15.0
• Molybdenum (Mo): 0.50 – 0.80
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X55CrMo14 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With very high hardness, excellent wear resistance, and reliable corrosion performance, X55CrMo14 stainless steel is a dependable choice for demanding industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X6CrMoS17 Stainless Steel Rod & Bar

Get Best Quote

Approx. Price: Rs 245 / KgGet Latest Price

Product Details:

Diameter	16 mm
Steel Grade	X6CrMoS17
Length	3 m
Application	Chemical Plant, Construction, Fabrication
EN standard	EN 10088-3
Manufactured / Supplied by	Ladhani Metal Corporation
Applications	Chemical processing equipment, fasteners, shafts, architectural and structural components

EN 10088-3 X6CrMoS17 is a martensitic stainless steel grade designed for applications requiring good corrosion resistance, moderate strength, and excellent machinability. The addition of sulphur improves free-machining properties, while molybdenum enhances corrosion resistance in aggressive environments. Supplied in rod and bar form, X6CrMoS17 stainless steel is widely used in engineering, mechanical, and industrial components where durability and precision are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X6CrMoS17 stainless steel rods and bars.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X6CrMoS17):
• X – High-alloy steel
• 6 – Approx. 0.06% carbon content
• CrMo – Chromium and molybdenum alloying
• S17 – Sulphur added for improved machinability

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.07
• Chromium (Cr): 16.0 – 18.0
• Molybdenum (Mo): 0.5 – 0.7
• Sulphur (S): 0.15 – 0.35
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.50
• Phosphorus (P): ≤ 0.040

Mechanical Properties (Typical, depending on heat treatment):
• Tensile Strength: 650 – 850 MPa
• Yield Strength: ≥ 400 MPa
• Elongation: 10 – 14%
• Hardness: Can be increased by quenching and tempering

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X6CrMoS17 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent machinability, corrosion resistance, and mechanical performance, X6CrMoS17 stainless steel is a reliable choice for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X17CrNi16-2 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 235 / KgGet Latest Price

Product Details:

Grade	X17CrNi16-2
Diameter	8 mm
Shape	Round
Length	12 ft (3.6 m)
Application	Fasteners, Marine, Construction, Railings, Machining
EN standard	EN 10088-3
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X17CrNi16-2 is an austenitic stainless steel grade designed for applications requiring excellent corrosion resistance, good strength, and superior toughness. Supplied in rod and bar form, X17CrNi16-2 stainless steel is widely used in engineering and industrial components where durability, formability, and resistance to corrosion in moderately aggressive environments are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X17CrNi16-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X17CrNi16-2):
• X – High-alloy steel
• 17 – Approx. 0.17% carbon content
• CrNi16-2 – Approx. 16% chromium, 2% nickel

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.17
• Chromium (Cr): 15.5 – 17.5
• Nickel (Ni): 1.5 – 2.5
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on heat treatment):
• Tensile Strength: 500 – 700 MPa
• Yield Strength: ≥ 200 MPa
• Elongation: 40 – 50%
• Hardness: Typically 170 – 230 HB

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X17CrNi16-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, toughness, and mechanical properties, X17CrNi16-2 stainless steel is a reliable choice for industrial, engineering, and chemical applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X2CrNi19-11 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 260 / KgGet Latest Price

Product Details:

Grade	X2CrNi19-11
Diameter	10 mm
Shape	Round
Length	10 ft (3 m)
Application	Fasteners, Construction, Machining, Furniture, Railings, Marine
EN standard	EN 10088-3
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X2CrNi19-11 is a low-carbon austenitic stainless steel grade known for excellent corrosion resistance, very good weldability, and high toughness. Due to its low carbon content, this grade offers improved resistance to intergranular corrosion, making it suitable for welded constructions and corrosive environments. Supplied in rod and bar form, X2CrNi19-11 stainless steel is widely used in industrial, engineering, and fabrication applications where durability, hygiene, and corrosion resistance are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNi19-11 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in compliance with EN 10088-3 requirements, ensuring consistent chemical composition, dimensional accuracy, and reliable performance.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X2CrNi19-11):
• X – High-alloy steel
• 2 – Approx. 0.02% carbon content
• CrNi19-11 – Approx. 19% chromium and 11% nickel

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.03
• Chromium (Cr): 18.0 – 20.0
• Nickel (Ni): 10.0 – 12.0
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 500 – 700 MPa
• Yield Strength: ≥ 200 MPa
• Elongation: 40 – 50%
• Hardness: Typically 160 – 220 HB

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X2CrNi19-11 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, excellent weldability, and dependable mechanical properties, X2CrNi19-11 stainless steel rod is an ideal choice for demanding industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X105CrMo17 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 250 / KgGet Latest Price

Product Details:

Grade	X105CrMo17
Diameter	8 mm
Shape	Round
Length	4 m
Application	Railings, Marine, Machining, Construction
EN standards	EN 10088-3
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X105CrMo17 is a very high-carbon martensitic stainless steel grade developed for applications requiring extremely high hardness, outstanding wear resistance, and good corrosion resistance. The presence of chromium and molybdenum enhances hardenability and corrosion performance, making this grade suitable for demanding mechanical and cutting applications. Supplied in rod and bar form, X105CrMo17 stainless steel is widely used in precision and heavy-duty industrial components. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X105CrMo17 stainless steel rods and bars.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X105CrMo17):
• X – High-alloy steel
• 105 – Approx. 1.05% carbon content
• CrMo17 – Approx. 17% chromium with molybdenum addition

Chemical Composition (% – typical limits):
• Carbon (C): 0.95 – 1.10
• Chromium (Cr): 16.0 – 18.0
• Molybdenum (Mo): 0.50 – 0.80
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on heat treatment):
• Tensile Strength: 800 – 1,000 MPa
• Yield Strength: ≥ 600 MPa
• Elongation: 5 – 10%
• Hardness: Can be extremely high after quenching and tempering

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X105CrMo17 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With extremely high hardness, outstanding wear resistance, and reliable corrosion performance, X105CrMo17 stainless steel rod is an excellent choice for demanding industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X4CrNi18-12 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 255 / KgGet Latest Price

Product Details:

Shape	Hexagonal
Grade	X4CrNi18-12
Diameter	6 mm
Length	3 m
Standard	EN 10088
Manufactured / Supplied by	Ladhani Metal Corporation
Applications	Chemical processing equipment, fasteners, shafts, architectural and structural components

EN 10088-3 X4CrNi18-12 is a low-carbon austenitic stainless steel grade offering excellent corrosion resistance, good strength, and outstanding toughness. With high chromium and nickel content, this grade provides reliable performance in oxidizing and mildly aggressive environments. Supplied in rod and bar form, X4CrNi18-12 stainless steel is widely used in engineering and industrial components where durability, formability, and corrosion resistance are essential. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X4CrNi18-12 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X4CrNi18-12):
• X – High-alloy steel
• 4 – Approx. 0.04% carbon content
• CrNi18-12 – Approx. 18% chromium and 12% nickel

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.08
• Chromium (Cr): 17.0 – 19.0
• Nickel (Ni): 10.5 – 13.0
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 500 – 700 MPa
• Yield Strength: ≥ 200 MPa
• Elongation: 40 – 50%
• Hardness: Typically 160 – 220 HB

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X4CrNi18-12 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, toughness, and versatility, X4CrNi18-12 stainless steel bar is a dependable choice for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X46Cr13 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 230 / KgGet Latest Price

Product Details:

Shape	hex
Grade	X46Cr13
Diameter	10 mm
Length	4 m
Standard	EN 10088
Manufactured / Supplied by	Ladhani Metal Corporation
Applications	Chemical processing equipment, fasteners, shafts, architectural and structural components

EN 10088-3 X46Cr13 is a martensitic stainless steel grade designed for applications requiring high hardness, excellent wear resistance, and moderate corrosion resistance. Supplied in rod and bar form, X46Cr13 stainless steel is widely used in engineering and industrial components where precision, durability, and mechanical performance are important. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X46Cr13 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X46Cr13):
• X – High-alloy steel
• 46 – Approx. 0.46% carbon content
• Cr13 – Approx. 13% chromium

Chemical Composition (% – typical limits):
• Carbon (C): 0.43 – 0.50
• Chromium (Cr): 12.0 – 14.0
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015
• Nickel (Ni): ≤ 0.50

Conclusion:

Ladhani Metal Corporation supplies high-quality EN 10088-3 X46Cr13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent hardness, wear resistance, and mechanical performance, X46Cr13 stainless steel is a reliable choice for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X29CrS13 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 225 / KgGet Latest Price

Product Details:

Grade	X29CrS13
Diameter	4 mm
Shape	Round
Length	10 ft (3 m)
Application	Machining, Construction, Railings, Marine
EN standard	EN 10088-3
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X29CrS13 is a martensitic stainless steel grade designed for applications requiring very high hardness, good wear resistance, and moderate corrosion resistance. Supplied in rod and bar form, X29CrS13 stainless steel is widely used in engineering and industrial components where precision, durability, and mechanical performance are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X29CrS13 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X29CrS13):
• X – High-alloy steel
• 29 – Approx. 0.29% carbon content
• Cr13 – Approx. 13% chromium
• S – Sulphur added for improved machinability

Chemical Composition (% – typical limits):
• Carbon (C): 0.26 – 0.32
• Chromium (Cr): 12.0 – 14.0
• Sulphur (S): 0.15 – 0.35
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.50
• Phosphorus (P): ≤ 0.040
• Nickel (Ni): ≤ 0.30

Mechanical Properties (Typical, depending on heat treatment):
• Tensile Strength: 700 – 900 MPa
• Yield Strength: ≥ 500 MPa
• Elongation: 8 – 12%
• Hardness: Can be significantly increased by quenching and tempering

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X29CrS13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent hardness, wear resistance, and machinability, X29CrS13 stainless steel is a reliable choice for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X10CrNi18-8 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 265 / KgGet Latest Price

Product Details:

Shape	Square
Grade	X10CrNi18-8
Diameter	12 mm
Length	4 m
Standard	EN 10088
Manufactured / Supplied by	Ladhani Metal Corporation
Applications	Chemical processing equipment, fasteners, shafts, architectural and structural components

EN 10088-3 X10CrNi18-8 is an austenitic stainless steel grade offering excellent corrosion resistance, good mechanical strength, and high toughness. With balanced chromium and nickel content, this grade provides reliable performance in oxidizing and mildly corrosive environments. Supplied in rod and bar form, X10CrNi18-8 stainless steel is widely used in engineering, fabrication, and industrial applications where formability, weldability, and corrosion resistance are essential. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X10CrNi18-8 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, dimensional accuracy, and reliable performance.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X10CrNi18-8):
• X – High-alloy steel
• 10 – Approx. 0.10% carbon content
• CrNi18-8 – Approx. 18% chromium and 8% nickel

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.15
• Chromium (Cr): 17.0 – 19.0
• Nickel (Ni): 7.5 – 9.5
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.045
• Sulphur (S): ≤ 0.030

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 500 – 750 MPa
• Yield Strength: ≥ 210 MPa
• Elongation: 40 – 45%
• Hardness: Typically 160 – 220 HB

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X10CrNi18-8 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With reliable corrosion resistance, good mechanical properties, and excellent fabricability, X10CrNi18-8 stainless steel bar is a dependable choice for industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X8CrMnNiN18-9-5 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 285 / KgGet Latest Price

Product Details:

Grade	X8CrMnNiN18-9-5
Diameter	12 mm
Shape	Round
Length	4 m
Application	Construction, Machining, Marine, Railings
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X8CrMnNiN18-9-5 is a nitrogen-alloyed austenitic stainless steel grade engineered to deliver high strength, excellent toughness, and good corrosion resistance. The combined addition of manganese and nitrogen significantly enhances yield strength while maintaining the ductility and formability typical of austenitic stainless steels. Supplied in rod and bar form, X8CrMnNiN18-9-5 stainless steel is well suited for demanding engineering and structural applications where higher mechanical strength and reliable corrosion performance are required.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X8CrMnNiN18-9-5 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X8CrMnNiN18-9-5):
• X – High-alloy steel
• 8 – Approx. 0.08% carbon content
• CrMnNiN18-9-5 – Approx. 18% chromium, 9% nickel, with manganese and nitrogen addition

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.10
• Chromium (Cr): 17.0 – 19.0
• Nickel (Ni): 8.0 – 10.0
• Manganese (Mn): 4.0 – 6.0
• Nitrogen (N): 0.15 – 0.30
• Silicon (Si): ≤ 1.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 700 – 900 MPa
• Yield Strength: ≥ 400 MPa
• Elongation: 30 – 40%
• Hardness: Typically 180 – 240 HB

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X8CrMnNiN18-9-5 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With enhanced strength, good corrosion resistance, and excellent toughness, X8CrMnNiN18-9-5 stainless steel rod is a reliable choice for demanding engineering and structural applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X11CrNiMnN19-8-6 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 280 / KgGet Latest Price

Product Details:

Shape	Round
Grade	X11CrNiMnN19-8-6
Diameter	12 mm
Length	3 m
Standard	EN 10088
Manufactured / Supplied by	Ladhani Metal Corporation
Applications	Chemical processing equipment, fasteners, shafts, architectural and structural components

EN 10088-3 X11CrNiMnN19-8-6 is a nitrogen-alloyed austenitic stainless steel grade designed to provide high strength, excellent toughness, and good corrosion resistance. The addition of nitrogen and manganese significantly enhances yield strength while maintaining the ductility and formability typical of austenitic stainless steels. Supplied in bar and rod form, X11CrNiMnN19-8-6 stainless steel is suitable for demanding engineering and structural applications where higher mechanical strength is required without sacrificing corrosion performance.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X11CrNiMnN19-8-6 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X11CrNiMnN19-8-6):
• X – High-alloy steel
• 11 – Approx. 0.11% carbon content
• CrNiMnN19-8-6 – Approx. 19% chromium, 8% nickel, with manganese and nitrogen addition

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.15
• Chromium (Cr): 18.0 – 20.0
• Nickel (Ni): 7.0 – 9.0
• Manganese (Mn): 5.0 – 7.0
• Nitrogen (N): 0.15 – 0.30
• Silicon (Si): ≤ 1.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 700 – 900 MPa
• Yield Strength: ≥ 450 MPa
• Elongation: 30 – 40%
• Hardness: Typically 180 – 240 HB

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X11CrNiMnN19-8-6 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With enhanced strength, good corrosion resistance, and reliable toughness, X11CrNiMnN19-8-6 stainless steel bar is a dependable solution for demanding engineering and structural applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X1CrNiSi18-15-4 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 280 / KgGet Latest Price

Product Details:

Shape	Round
Grade	#EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #EN
Diameter	12 mm
Length	6 m
Standard	EN 10088
Manufactured / Supplied by	Ladhani Metal Corporation
Applications	Chemical processing equipment, fasteners, shafts, architectural and structural components

EN 10088-3 X1CrNiSi18-15-4 is a high-alloy austenitic stainless steel grade characterized by excellent oxidation resistance, good corrosion resistance, and stable mechanical properties at elevated temperatures. The addition of silicon significantly enhances resistance to scaling and oxidation, making this grade suitable for high-temperature and thermal cycling applications. Supplied in rod and bar form, X1CrNiSi18-15-4 stainless steel is widely used in industrial and engineering components exposed to heat, corrosive gases, and demanding service conditions.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiSi18-15-4 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X1CrNiSi18-15-4):
• X – High-alloy steel
• 1 – Approx. 0.01% carbon content
• CrNiSi18-15-4 – Approx. 18% chromium, 15% nickel, and 4% silicon

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.03
• Chromium (Cr): 17.0 – 19.0
• Nickel (Ni): 14.0 – 16.0
• Silicon (Si): 3.0 – 4.5
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 500 – 700 MPa
• Yield Strength: ≥ 200 MPa
• Elongation: 35 – 45%
• Hardness: Typically 160 – 220 HB

Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10088-3 X1CrNiSi18-15-4 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent oxidation resistance, good corrosion performance, and stable high-temperature properties, X1CrNiSi18-15-4 stainless steel rod is an ideal choice for demanding thermal and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X5CrNi17-7 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 275 / KgGet Latest Price

Product Details:

Shape	Flat
Grade	X5CrNi17-7
Diameter	16 mm
Length	3 m
Standard	EN 10088
Manufactured / Supplied by	Ladhani Metal Corporation
Applications	Chemical processing equipment, fasteners, shafts, architectural and structural components

EN 10088-3 X5CrNi17-7 is a precipitation-hardening stainless steel grade that offers a unique combination of high strength, good corrosion resistance, and excellent fatigue properties. With balanced chromium and nickel content, this grade can be strengthened through suitable heat treatment, making it ideal for applications requiring higher mechanical strength than conventional austenitic stainless steels. Supplied in rod and bar form, X5CrNi17-7 stainless steel is widely used in engineering and industrial applications where strength, corrosion resistance, and dimensional stability are critical.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X5CrNi17-7 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X5CrNi17-7):
• X – High-alloy steel
• 5 – Approx. 0.05% carbon content
• CrNi17-7 – Approx. 17% chromium and 7% nickel

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.07
• Chromium (Cr): 16.0 – 18.0
• Nickel (Ni): 6.5 – 7.8
• Aluminium (Al): 0.75 – 1.50
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 900 – 1,200 MPa
• Yield Strength: ≥ 700 MPa
• Elongation: 6 – 12%
• Hardness: Can be significantly increased by precipitation hardening

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X5CrNi17-7 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With high strength, good corrosion resistance, and excellent fatigue properties, X5CrNi17-7 stainless steel bar is a reliable choice for demanding engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X3CrNiMo13-4 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 270 / KgGet Latest Price

Product Details:

Grade	X3CrNiMo13-4
Diameter	10 mm
Shape	Round
Length	12 ft (3.6 m)
Application	Marine, Railings, Fasteners, Machining, Construction
EN standard	EN 10088-3
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X3CrNiMo13-4 is a low-carbon martensitic–austenitic (martensitic stainless steel with nickel and molybdenum) grade offering high strength, excellent toughness, and improved corrosion resistance compared to standard martensitic steels. The addition of nickel enhances toughness, while molybdenum improves resistance to pitting and crevice corrosion. Supplied in rod and bar form, X3CrNiMo13-4 stainless steel is widely used in demanding engineering and industrial applications requiring a combination of strength, corrosion resistance, and weldability. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiMo13-4 stainless steel rods and bars.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X3CrNiMo13-4):
• X – High-alloy steel
• 3 – Approx. 0.03% carbon content
• CrNiMo13-4 – Approx. 13% chromium, 4% nickel, with molybdenum addition

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.05
• Chromium (Cr): 12.0 – 14.0
• Nickel (Ni): 3.5 – 4.5
• Molybdenum (Mo): 0.4 – 0.7
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on heat treatment):
• Tensile Strength: 800 – 1,000 MPa
• Yield Strength: ≥ 650 MPa
• Elongation: 15 – 18%
• Hardness: Can be adjusted by quenching and tempering

Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10088-3 X3CrNiMo13-4 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With high strength, excellent toughness, and enhanced corrosion resistance, X3CrNiMo13-4 stainless steel rod is a dependable solution for demanding industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X2CrNiMoN25-7-4 SS Rod

Get Best Quote

Approx. Price: Rs 210 / KgGet Latest Price

Product Details:

Grade	X2CrNiMoN25-7-4
Diameter	16 mm
Shape	Round
Length	10 ft (3 m)
Application	Railings, Marine, Construction, Machining
EN standard	EN 10088-3
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X2CrNiMoN25-7-4 is a super duplex stainless steel grade developed for applications requiring extremely high corrosion resistance, excellent mechanical strength, and outstanding resistance to pitting, crevice corrosion, and stress corrosion cracking. The balanced austenitic–ferritic microstructure, combined with high chromium, molybdenum, and nitrogen content, provides superior performance in aggressive and chloride-rich environments. Supplied in rod and bar form, X2CrNiMoN25-7-4 stainless steel is widely used in critical industrial, marine, and offshore applications.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoN25-7-4 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X2CrNiMoN25-7-4):
• X – High-alloy steel
• 2 – Approx. 0.02% carbon content
• CrNiMoN25-7-4 – Approx. 25% chromium, 7% nickel, 4% molybdenum, with nitrogen addition

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.03
• Chromium (Cr): 24.0 – 26.0
• Nickel (Ni): 6.0 – 8.0
• Molybdenum (Mo): 3.5 – 4.5
• Nitrogen (N): 0.24 – 0.32
• Silicon (Si): ≤ 0.80
• Manganese (Mn): ≤ 1.20
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 750 – 950 MPa
• Yield Strength: ≥ 550 MPa
• Elongation: 25 – 30%
• Hardness: Typically 250 – 300 HB

Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNiMoN25-7-4 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With exceptional corrosion resistance, high mechanical strength, and reliable performance in aggressive environments, X2CrNiMoN25-7-4 stainless steel rod is a dependable solution for critical industrial, marine, and offshore applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X2CrNiMo17-12-2 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 200 / KgGet Latest Price

Product Details:

Shape	Hexagonal
Grade	X2CrNiMo17-12-2
Diameter	16 mm
Length	3 m
Standard	EN 10088
Manufactured / Supplied by	Ladhani Metal Corporation
Applications	Chemical processing equipment, fasteners, shafts, architectural and structural components

EN 10088-3 X2CrNiMo17-12-2 is a low-carbon austenitic stainless steel grade offering excellent corrosion resistance, particularly against pitting and crevice corrosion, due to the addition of molybdenum. Its low carbon content provides improved resistance to intergranular corrosion after welding, making this grade suitable for fabricated and welded components. Supplied in bar and rod form, X2CrNiMo17-12-2 stainless steel is widely used in demanding industrial and engineering applications where high corrosion resistance and good mechanical properties are required.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMo17-12-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, dimensional accuracy, and reliable performance.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X2CrNiMo17-12-2):
• X – High-alloy steel
• 2 – Approx. 0.02% carbon content
• CrNiMo17-12-2 – Approx. 17% chromium, 12% nickel, and 2% molybdenum

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.03
• Chromium (Cr): 16.5 – 18.5
• Nickel (Ni): 10.0 – 13.0
• Molybdenum (Mo): 2.0 – 2.5
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 500 – 700 MPa
• Yield Strength: ≥ 200 MPa
• Elongation: 40 – 50%
• Hardness: Typically 160 – 220 HB

Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNiMo17-12-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, superior weldability, and dependable mechanical properties, X2CrNiMo17-12-2 stainless steel bar is an ideal choice for demanding industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X2CrNiMoCuN25-6-3 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 280 / KgGet Latest Price

Product Details:

Grade	X2CrNiMoCuN25-6-3
Diameter	16 mm
Shape	Round
Length	3 m
Application	Railings, Fasteners, Marine, Construction, Machining
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X2CrNiMoCuN25-6-3 is a super duplex stainless steel grade developed for highly aggressive environments requiring exceptional corrosion resistance, high mechanical strength, and excellent resistance to stress corrosion cracking. The addition of chromium, nickel, molybdenum, copper, and nitrogen provides outstanding resistance to pitting, crevice corrosion, and corrosion in acidic and chloride-rich environments. Supplied in rod and bar form, X2CrNiMoCuN25-6-3 stainless steel is widely used in offshore, chemical, and marine applications.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoCuN25-6-3 stainless steel rods and bars.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X2CrNiMoCuN25-6-3):
• X – High-alloy steel
• 2 – Approx. 0.02% carbon content
• CrNiMoCuN25-6-3 – Approx. 25% chromium, 6% nickel, 3% molybdenum, with copper and nitrogen additions

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.03
• Chromium (Cr): 24.0 – 26.0
• Nickel (Ni): 5.5 – 7.5
• Molybdenum (Mo): 2.5 – 3.5
• Copper (Cu): 0.5 – 2.0
• Nitrogen (N): 0.20 – 0.30
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.00
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 750 – 950 MPa
• Yield Strength: ≥ 550 MPa
• Elongation: 20 – 25%
• Hardness: Typically 260 – 320 HB

Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNiMoCuN25-6-3 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With outstanding corrosion resistance, high strength, and dependable performance in extreme environments, X2CrNiMoCuN25-6-3 stainless steel rod is an ideal solution for critical industrial, marine, and offshore applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X2CrNiMoN29-7-2 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 270 / KgGet Latest Price

Product Details:

Shape	Round
Grade	X2CrNiMoN29-7-2
Diameter	25 mm
Length	Cut Length
Standard	EN 10088
Manufactured / Supplied by	Ladhani Metal Corporation
Corrosion Resistance	Very good resistance to atmospheric corrosion, moisture, and many chemical environments;

EN 10088-3 X2CrNiMoN29-7-2 is a super duplex stainless steel grade engineered for extremely demanding environments requiring exceptional corrosion resistance, very high mechanical strength, and outstanding resistance to stress corrosion cracking. With very high chromium content, combined with nickel, molybdenum, and nitrogen, this grade offers superior resistance to pitting, crevice corrosion, and chloride-induced corrosion. Supplied in bar and rod form, X2CrNiMoN29-7-2 stainless steel is widely used in critical industrial, marine, and offshore applications.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoN29-7-2 stainless steel rods and bars.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X2CrNiMoN29-7-2):
• X – High-alloy steel
• 2 – Approx. 0.02% carbon content
• CrNiMoN29-7-2 – Approx. 29% chromium, 7% nickel, 2% molybdenum, with nitrogen addition

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.03
• Chromium (Cr): 28.0 – 30.0
• Nickel (Ni): 6.0 – 8.0
• Molybdenum (Mo): 1.5 – 2.5
• Nitrogen (N): 0.20 – 0.30
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.00
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 750 – 950 MPa
• Yield Strength: ≥ 550 MPa
• Elongation: 20 – 25%
• Hardness: Typically 260 – 320 HB

Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNiMoN29-7-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With exceptional corrosion resistance, very high strength, and reliable performance in extreme environments, X2CrNiMoN29-7-2 stainless steel bar is a superior choice for critical industrial, marine, and offshore applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X2CrNiMoN17-13-5 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 260 / KgGet Latest Price

Product Details:

Shape	Round
Grade	X2CrNiMoN17-13-5
Diameter	32 mm
Standard	EN 10088
Origin	Imported
Manufactured / Supplied by	Ladhani Metal Corporation
Applications	automotive and railway parts, marine fittings, food processing equipment, and general fabrication

EN 10088-3 X2CrNiMoN17-13-5 is a nitrogen-alloyed austenitic stainless steel grade developed to provide excellent corrosion resistance, high mechanical strength, and superior resistance to pitting and crevice corrosion. The addition of molybdenum and nitrogen significantly enhances performance in chloride-containing and aggressive environments while maintaining good weldability and toughness. Supplied in bar and rod form, X2CrNiMoN17-13-5 stainless steel is widely used in demanding industrial, chemical, and marine applications where enhanced corrosion resistance and strength are required.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoN17-13-5 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X2CrNiMoN17-13-5):
• X – High-alloy steel
• 2 – Approx. 0.02% carbon content
• CrNiMoN17-13-5 – Approx. 17% chromium, 13% nickel, 5% molybdenum, with nitrogen addition

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.03
• Chromium (Cr): 16.0 – 18.0
• Nickel (Ni): 12.0 – 14.0
• Molybdenum (Mo): 4.5 – 5.5
• Nitrogen (N): 0.15 – 0.30
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 650 – 850 MPa
• Yield Strength: ≥ 350 MPa
• Elongation: 30 – 40%
• Hardness: Typically 180 – 240 HB

Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNiMoN17-13-5 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With outstanding corrosion resistance, high strength, and reliable performance in aggressive environments, X2CrNiMoN17-13-5 stainless steel bar is an excellent choice for demanding industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X4CrNiMo16-5-1 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 220 / KgGet Latest Price

Product Details:

Shape	Flat
Grade	X4CrNiMo16-5-1
Length	4 m
Standard	EN 10088
Thickness / Diameter Range	3 mm to 300 mm
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X4CrNiMo16-5-1 is a martensitic–austenitic stainless steel grade combining high mechanical strength, good toughness, and improved corrosion resistance. The addition of nickel enhances toughness, while molybdenum improves resistance to pitting and general corrosion. Supplied in bar and rod form, X4CrNiMo16-5-1 stainless steel is widely used in demanding engineering and industrial applications where strength, corrosion resistance, and dimensional stability are required.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X4CrNiMo16-5-1 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X4CrNiMo16-5-1):
• X – High-alloy steel
• 4 – Approx. 0.04% carbon content
• CrNiMo16-5-1 – Approx. 16% chromium, 5% nickel, and 1% molybdenum

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.06
• Chromium (Cr): 15.0 – 17.0
• Nickel (Ni): 4.0 – 6.0
• Molybdenum (Mo): 0.8 – 1.5
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on heat treatment):
• Tensile Strength: 800 – 1,050 MPa
• Yield Strength: ≥ 600 MPa
• Elongation: 14 – 18%
• Hardness: Can be adjusted by quenching and tempering

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X4CrNiMo16-5-1 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With high strength, good corrosion resistance, and excellent toughness, X4CrNiMo16-5-1 stainless steel bar is a dependable choice for demanding engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X3CrNb17 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 285 / KgGet Latest Price

Product Details:

Shape	Flat
Grade	X3CrNb17
Length	6 m
Standard	EN 10088
Thickness / Diameter Range	3 mm to 300 mm
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X3CrNb17 is a ferritic stainless steel grade stabilized with niobium, designed for applications requiring good corrosion resistance, excellent resistance to intergranular corrosion, and stable mechanical properties at elevated temperatures. The niobium addition prevents carbide precipitation, improving weldability and high-temperature performance. Supplied in bar and rod form, X3CrNb17 stainless steel is commonly used in automotive, industrial, and structural applications where oxidation resistance and thermal stability are important. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and other long products for general purposes.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNb17 stainless steel rods and bars.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X3CrNb17):
• X – High-alloy steel
• 3 – Approx. 0.03% carbon content
• Cr17 – Approx. 17% chromium
• Nb – Niobium stabilized

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.05
• Chromium (Cr): 16.0 – 18.0
• Niobium (Nb): 0.20 – 0.80
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 450 – 600 MPa
• Yield Strength: ≥ 280 MPa
• Elongation: 20 – 25%
• Hardness: Typically 160 – 200 HB

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X3CrNb17 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With good corrosion resistance, thermal stability, and reliable mechanical performance, X3CrNb17 stainless steel bar is a dependable choice for automotive, industrial, and heat-resistant applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X2CrNiMoN22-5-3 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 260 / KgGet Latest Price

Product Details:

Grade	X2CrNiMoN22-5-3
Diameter	16 mm
Shape	Round
Length	10 ft (3 m)
Application	Railings, Machining, Marine, Construction
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X2CrNiMoN22-5-3 is a duplex stainless steel grade designed to deliver an excellent combination of high mechanical strength, superior corrosion resistance, and outstanding resistance to stress corrosion cracking. The balanced austenitic–ferritic microstructure, along with chromium, molybdenum, and nitrogen alloying, provides enhanced resistance to pitting and crevice corrosion in chloride-rich and aggressive environments. Supplied in rod and bar form, X2CrNiMoN22-5-3 stainless steel is widely used in demanding industrial, marine, and offshore applications.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoN22-5-3 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X2CrNiMoN22-5-3):
• X – High-alloy steel
• 2 – Approx. 0.02% carbon content
• CrNiMoN22-5-3 – Approx. 22% chromium, 5% nickel, 3% molybdenum, with nitrogen addition

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.03
• Chromium (Cr): 21.0 – 23.0
• Nickel (Ni): 4.5 – 6.5
• Molybdenum (Mo): 2.5 – 3.5
• Nitrogen (N): 0.14 – 0.22
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 620 – 850 MPa
• Yield Strength: ≥ 450 MPa
• Elongation: 25 – 30%
• Hardness: Typically 230 – 280 HB

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X2CrNiMoN22-5-3 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, high mechanical strength, and reliable performance in aggressive environments, X2CrNiMoN22-5-3 stainless steel rod is a dependable solution for industrial, marine, and offshore applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X3CrNiMo17-13-3 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 250 / KgGet Latest Price

Product Details:

Grade	X3CrNiMo17-13-3
Diameter	16 mm
Shape	Round
Length	3 m
Application	Fasteners, Construction, Machining, Marine, Railings
EN standard	EN 10088-3
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X3CrNiMo17-13-3 is a low-carbon austenitic stainless steel grade engineered for excellent corrosion resistance, high toughness, and reliable mechanical strength. With balanced additions of chromium, nickel, and molybdenum, this grade offers strong resistance to pitting and crevice corrosion in chloride-bearing and aggressive environments while maintaining good weldability. Supplied in rod and bar form, X3CrNiMo17-13-3 stainless steel is widely used in industrial, chemical, and marine applications where durability and corrosion resistance are essential.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiMo17-13-3 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, dimensional accuracy, and dependable performance.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X3CrNiMo17-13-3):
• X – High-alloy steel
• 3 – Approx. 0.03% carbon content
• CrNiMo17-13-3 – Approx. 17% chromium, 13% nickel, and 3% molybdenum

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.05
• Chromium (Cr): 16.5 – 18.5
• Nickel (Ni): 12.0 – 14.0
• Molybdenum (Mo): 2.5 – 3.5
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 500 – 750 MPa
• Yield Strength: ≥ 210 MPa
• Elongation: 40 – 50%
• Hardness: Typically 160 – 220 HB

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X3CrNiMo17-13-3 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, good weldability, and reliable mechanical performance, X3CrNiMo17-13-3 stainless steel rod is a dependable choice for demanding industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X3CrNb17 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 230 / KgGet Latest Price

Product Details:

Grade	X3CrNb17
Diameter	20 mm
Shape	Round
Length	4 m
Application	Marine, Railings, Machining, Construction
EN Standard	EN 10088-3
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X3CrNb17 is a ferritic stainless steel grade stabilized with niobium, designed to provide good corrosion resistance, improved weldability, and excellent resistance to intergranular corrosion. The niobium addition stabilizes carbon and nitrogen, enhancing structural stability during welding and high-temperature service. Supplied in rod and bar form, X3CrNb17 stainless steel is widely used in industrial and engineering applications where corrosion resistance, thermal stability, and dimensional reliability are required.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNb17 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X3CrNb17):
• X – High-alloy steel
• 3 – Approx. 0.03% carbon content
• CrNb17 – Approx. 17% chromium with niobium stabilization

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.05
• Chromium (Cr): 16.0 – 18.0
• Niobium (Nb): ≥ 8 × C (typically 0.3 – 0.8)
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 450 – 650 MPa
• Yield Strength: ≥ 280 MPa
• Elongation: 20 – 25%
• Hardness: Typically 150 – 200 HB

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X3CrNb17 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With good corrosion resistance, excellent weldability, and thermal stability, X3CrNb17 stainless steel rod is a dependable choice for industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X2CrMoTiS18-2 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 205 / KgGet Latest Price

Product Details:

Grade	X2CrMoTiS18-2
Diameter	12 mm
Shape	Round
Length	3 m
Application	Railings, Construction, Kitchenware, Marine, Fasteners
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X2CrMoTiS18-2 is a free-machining ferritic stainless steel grade stabilized with titanium and alloyed with molybdenum to enhance corrosion resistance and machinability. The addition of sulphur significantly improves cutting performance, making this grade suitable for high-speed machining and precision components. X2CrMoTiS18-2 offers good resistance to general corrosion, oxidation, and mild chemical environments, along with stable mechanical properties. Supplied in rod and bar form, this grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrMoTiS18-2 stainless steel rods and bars.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X2CrMoTiS18-2):
• X – High-alloy steel
• 2 – Approx. 0.02% carbon content
• Cr18 – Approx. 18% chromium
• Mo2 – Approx. 2% molybdenum
• Ti – Titanium stabilized
• S – Sulphur added for improved machinability

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.03
• Chromium (Cr): 17.0 – 19.0
• Molybdenum (Mo): 1.5 – 2.5
• Titanium (Ti): Stabilizing addition
• Sulphur (S): 0.15 – 0.35
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.50
• Phosphorus (P): ≤ 0.040

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 450 – 650 MPa
• Yield Strength: ≥ 280 MPa
• Elongation: 18 – 22%
• Hardness: Typically 160 – 210 HB

Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrMoTiS18-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent machinability, good corrosion resistance, and stable performance, X2CrMoTiS18-2 stainless steel rod is an ideal choice for precision engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X1NiCrMoCuN25-20-7 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 215 / KgGet Latest Price

Product Details:

Shape	Hexagonal
Grade	X1NiCrMoCuN25-20-7
Diameter	20 mm
Length	4 m
Standard	EN 10088
Manufactured / Supplied by	Ladhani Metal Corporation
Applications	Chemical processing equipment, fasteners, shafts, architectural and structural components

EN 10088-3 X1NiCrMoCuN25-20-7 is a high-alloy austenitic stainless steel grade developed for extremely aggressive corrosive environments where exceptional resistance to pitting, crevice corrosion, and stress corrosion cracking is required. With very high nickel and chromium content, combined with molybdenum, copper, and nitrogen, this grade provides outstanding resistance to acids, chlorides, and reducing environments. Supplied in bar and rod form, X1NiCrMoCuN25-20-7 stainless steel is widely used in chemical processing and severe service applications.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1NiCrMoCuN25-20-7 stainless steel rods and bars.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X1NiCrMoCuN25-20-7):
• X – High-alloy steel
• 1 – Approx. 0.01% carbon content
• NiCrMoCuN25-20-7 – Approx. 25% nickel, 20% chromium, 7% molybdenum, with copper and nitrogen additions

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.02
• Nickel (Ni): 24.0 – 26.0
• Chromium (Cr): 19.0 – 21.0
• Molybdenum (Mo): 6.0 – 7.5
• Copper (Cu): 0.5 – 2.0
• Nitrogen (N): 0.15 – 0.25
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 650 – 850 MPa
• Yield Strength: ≥ 300 MPa
• Elongation: 30 – 40%
• Hardness: Typically 180 – 230 HB

Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10088-3 X1NiCrMoCuN25-20-7 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, high alloy content, and dependable performance in aggressive environments, X1NiCrMoCuN25-20-7 stainless steel bar is an excellent choice for critical chemical, marine, and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X1CrNiMoCuN25-25-5 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 215 / KgGet Latest Price

Product Details:

Grade	X1CrNiMoCuN25-25-5
Diameter	16 mm
Shape	Round
Length	4 m
Application	Fasteners, Marine, Machining, Railings, Construction
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X1CrNiMoCuN25-25-5 is a high-alloy austenitic stainless steel grade engineered for extremely aggressive environments where superior resistance to corrosion, pitting, crevice attack, and stress corrosion cracking is essential. The high chromium and nickel content, combined with molybdenum, copper, and nitrogen, provides excellent performance in acidic, chloride-rich, and chemically aggressive media. Supplied in rod and bar form, X1CrNiMoCuN25-25-5 stainless steel is commonly used in critical chemical and industrial applications.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiMoCuN25-25-5 stainless steel rods and bars.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X1CrNiMoCuN25-25-5):
• X – High-alloy steel
• 1 – Approx. 0.01% carbon content
• CrNiMoCuN25-25-5 – Approx. 25% chromium, 25% nickel, 5% molybdenum, with copper and nitrogen additions

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.02
• Chromium (Cr): 24.0 – 26.0
• Nickel (Ni): 24.0 – 26.0
• Molybdenum (Mo): 4.5 – 6.0
• Copper (Cu): 0.5 – 2.0
• Nitrogen (N): 0.15 – 0.25
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 650 – 850 MPa
• Yield Strength: ≥ 300 MPa
• Elongation: 30 – 40%
• Hardness: Typically 180 – 230 HB

Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10088-3 X1CrNiMoCuN25-25-5 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With exceptional corrosion resistance, high alloy content, and dependable performance in aggressive environments, X1CrNiMoCuN25-25-5 stainless steel rod is an ideal choice for critical industrial and chemical applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X6CrNiTi18-10 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 225 / KgGet Latest Price

Product Details:

Shape	Square
Grade	X6CrNiTi18-10
Length	Cut Length
Standard	EN 10088
Origin	Imported
Thickness / Diameter Range	3 mm to 300 mm
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X6CrNiTi18-10 is a titanium-stabilized austenitic stainless steel grade designed for applications requiring good corrosion resistance, excellent weldability, and improved resistance to intergranular corrosion. The addition of titanium stabilizes carbon, preventing chromium carbide precipitation during welding or exposure to elevated temperatures. Supplied in bar and rod form, X6CrNiTi18-10 stainless steel is widely used in engineering, chemical, and structural applications where thermal stability and corrosion resistance are essential.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X6CrNiTi18-10 stainless steel rods and bars.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X6CrNiTi18-10):
• X – High-alloy steel
• 6 – Approx. 0.06% carbon content
• CrNi18-10 – Approx. 18% chromium and 10% nickel
• Ti – Titanium stabilized

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.08
• Chromium (Cr): 17.0 – 19.0
• Nickel (Ni): 9.0 – 12.0
• Titanium (Ti): ≥ 5 × C (stabilizing addition)
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 500 – 700 MPa
• Yield Strength: ≥ 210 MPa
• Elongation: 40 – 45%
• Hardness: Typically 160 – 200 HB

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X6CrNiTi18-10 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent weldability, resistance to intergranular corrosion, and dependable mechanical performance, X6CrNiTi18-10 stainless steel bar is a reliable choice for chemical, structural, and high-temperature applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X1CrNiMoCuN20-18-7 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 235 / KgGet Latest Price

Product Details:

Grade	X1CrNiMoCuN20-18-7
Diameter	16 mm
Shape	Round
Length	10 ft (3 m)
Application	Marine, Machining, Fasteners, Construction, Railings
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X1CrNiMoCuN20-18-7 is a high-alloy austenitic stainless steel grade engineered for severe corrosive environments where excellent resistance to pitting, crevice corrosion, and stress corrosion cracking is required. The balanced addition of chromium, nickel, molybdenum, copper, and nitrogen provides superior performance in acidic, chloride-rich, and chemically aggressive conditions.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiMoCuN20-18-7 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, excellent corrosion resistance, and precise dimensional accuracy.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X1CrNiMoCuN20-18-7):
• X – High-alloy steel
• 1 – Approx. 0.01% carbon content
• CrNiMoCuN20-18-7 – Approx. 20% chromium, 18% nickel, 7% molybdenum, with copper and nitrogen additions

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.02
• Chromium (Cr): 19.0 – 21.0
• Nickel (Ni): 17.0 – 19.0
• Molybdenum (Mo): 6.0 – 7.5
• Copper (Cu): 0.5 – 2.0
• Nitrogen (N): 0.15 – 0.25
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 650 – 850 MPa
• Yield Strength: ≥ 300 MPa
• Elongation: 30 – 40%
• Hardness: Typically 180 – 230 HB

Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10088-3 X1CrNiMoCuN20-18-7 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, high alloy content, and dependable performance in aggressive environments, X1CrNiMoCuN20-18-7 stainless steel rod is an excellent choice for critical industrial and chemical applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X1CrNiMoCuN24-22-8 Stainless Steel Rod

Get Best Quote

Approx. Price: Rs 210 / KgGet Latest Price

Product Details:

Grade	X1CrNiMoCuN24-22-8
Diameter	25 mm
Shape	Round
Length	10 ft (3 m)
Application	Machining, Marine, Construction, Railings, Fasteners
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X1CrNiMoCuN24-22-8 is a high-alloy austenitic stainless steel grade developed for applications requiring excellent corrosion resistance, high strength, and superior performance in aggressive environments. With high chromium and nickel content, along with molybdenum, copper, and nitrogen additions, this grade offers outstanding resistance to pitting, crevice corrosion, and stress corrosion cracking.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiMoCuN24-22-8 stainless steel rods and bars. All materials are sourced from approved mills and supplied in compliance with EN 10088-3 requirements, ensuring precise chemical composition, consistent mechanical properties, and excellent dimensional accuracy.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X1CrNiMoCuN24-22-8):
• X – High-alloy steel
• 1 – Approx. 0.01% carbon content
• CrNiMoCuN24-22-8 – Approx. 24% chromium, 22% nickel, 8% molybdenum, with copper and nitrogen

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.02
• Chromium (Cr): 23.0 – 25.0
• Nickel (Ni): 21.0 – 23.0
• Molybdenum (Mo): 7.0 – 9.0
• Copper (Cu): 0.5 – 2.0
• Nitrogen (N): 0.15 – 0.30
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, solution annealed):
• Tensile Strength: 550 – 750 MPa
• Yield Strength: ≥ 280 MPa
• Elongation: ≥ 35%
• Hardness: Typically ≤ 220 HB

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X1CrNiMoCuN24-22-8 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With exceptional corrosion resistance, high alloy strength, and reliable performance in aggressive environments, X1CrNiMoCuN24-22-8 stainless steel rod is an ideal choice for demanding industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X2CrNiMoCuS17-10-2 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 280 / KgGet Latest Price

Product Details:

Shape	Round
Grade	X2CrNiMoCuS17-10-2
Diameter	32 mm
Length	5 m
Standard	EN 10088
Manufactured / Supplied by	Ladhani Metal Corporation
Applications	automotive and railway parts, marine fittings, food processing equipment, and general fabrication

EN 10088-3 X2CrNiMoCuS17-10-2 is a free-machining austenitic stainless steel grade developed for applications requiring good corrosion resistance, improved machinability, and reliable mechanical performance. The addition of sulphur significantly enhances machinability, while chromium, nickel, and molybdenum provide resistance to general and localized corrosion. Copper improves resistance in certain acidic environments.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoCuS17-10-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, excellent machinability, and precise dimensional accuracy.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X2CrNiMoCuS17-10-2):
• X – High-alloy steel
• 2 – Approx. 0.02% carbon content
• CrNiMoCu17-10-2 – Approx. 17% chromium, 10% nickel, 2% molybdenum, with copper
• S – Sulphur added for improved machinability

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.03
• Chromium (Cr): 16.0 – 18.0
• Nickel (Ni): 9.0 – 11.0
• Molybdenum (Mo): 1.5 – 2.5
• Copper (Cu): 0.5 – 2.0
• Sulphur (S): 0.15 – 0.35
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.035

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 500 – 700 MPa
• Yield Strength: ≥ 220 MPa
• Elongation: 30 – 40%
• Hardness: Typically 160 – 220 HB

Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNiMoCuS17-10-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent machinability, reliable corrosion resistance, and stable mechanical properties, X2CrNiMoCuS17-10-2 stainless steel bar is a dependable choice for precision engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X6CrNiMoNb17-12-2 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 275 / KgGet Latest Price

Product Details:

Shape	Hexagonal
Grade	X6CrNiMoNb17-12-2
Length	6 m
Standard	EN 10088
Thickness / Diameter Range	3 mm to 300 mm
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X6CrNiMoNb17-12-2 is a niobium-stabilized austenitic stainless steel grade designed for applications requiring good corrosion resistance, excellent resistance to intergranular corrosion, and reliable performance at moderately elevated temperatures. The combination of chromium, nickel, and molybdenum provides strong resistance to general and localized corrosion, while niobium stabilization prevents chromium carbide precipitation during welding and thermal exposure.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X6CrNiMoNb17-12-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X6CrNiMoNb17-12-2):
• X – High-alloy steel
• 6 – Approx. 0.06% carbon content
• CrNiMo17-12-2 – Approx. 17% chromium, 12% nickel, 2% molybdenum
• Nb – Niobium stabilized

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.08
• Chromium (Cr): 16.0 – 18.0
• Nickel (Ni): 11.0 – 13.0
• Molybdenum (Mo): 1.5 – 2.5
• Niobium (Nb): Stabilizing addition
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 500 – 700 MPa
• Yield Strength: ≥ 220 MPa
• Elongation: 35 – 45%
• Hardness: Typically 160 – 200 HB

Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10088-3 X6CrNiMoNb17-12-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent weldability, strong corrosion resistance, and stable mechanical properties, X6CrNiMoNb17-12-2 stainless steel bar is a dependable choice for chemical, industrial, and structural applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X3CrNiCu19-9-2 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 245 / KgGet Latest Price

Product Details:

Shape	Flat
Grade	X3CrNiCu19-9-2
Length	Cut Length
Standard	EN 10088
Thickness / Diameter Range	3 mm to 300 mm
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X3CrNiCu19-9-2 is a precipitation-hardening austenitic stainless steel grade designed for applications requiring good corrosion resistance combined with higher strength achieved through age hardening. The controlled addition of copper enables precipitation strengthening, while chromium and nickel provide reliable resistance to general corrosion and oxidation.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiCu19-9-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X3CrNiCu19-9-2):
• X – High-alloy steel
• 3 – Approx. 0.03% carbon content
• CrNiCu19-9-2 – Approx. 19% chromium, 9% nickel, 2% copper

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.05
• Chromium (Cr): 18.0 – 20.0
• Nickel (Ni): 8.0 – 10.0
• Copper (Cu): 1.5 – 2.5
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 2.00
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on condition):
• Tensile Strength: 600 – 900 MPa (higher after aging)
• Yield Strength: ≥ 300 MPa (can be significantly increased by precipitation hardening)
• Elongation: 20 – 35%
• Hardness: Typically 180 – 280 HB (after aging)

Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10088-3 X3CrNiCu19-9-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With good corrosion resistance, precipitation-hardening capability, and reliable mechanical performance, X3CrNiCu19-9-2 stainless steel bar is a dependable choice for engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 X2CrNi12 Stainless Steel Bar

Get Best Quote

Approx. Price: Rs 220 / KgGet Latest Price

Product Details:

Shape	Flat
Grade	X2CrNi12
Length	3 m
Standard	EN 10088
Thickness / Diameter Range	3 mm to 300 mm
Manufactured / Supplied by	Ladhani Metal Corporation

EN 10088-3 X2CrNi12 is a martensitic stainless steel grade designed for applications requiring a combination of good mechanical strength, moderate corrosion resistance, and excellent toughness. With chromium and nickel additions, this grade offers improved hardenability and better impact properties compared to straight chromium martensitic steels.

Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNi12 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy.

Forms of Supply:
Round bar, hex bar, square bar, rectangular bar, flat bar, rod

Explanation of Designation (X2CrNi12):
• X – High-alloy steel
• 2 – Approx. 0.02% carbon content
• CrNi12 – Approx. 12% chromium with nickel addition

Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.03
• Chromium (Cr): 11.0 – 13.0
• Nickel (Ni): 0.5 – 2.5
• Silicon (Si): ≤ 1.00
• Manganese (Mn): ≤ 1.00
• Phosphorus (P): ≤ 0.040
• Sulphur (S): ≤ 0.015

Mechanical Properties (Typical, depending on heat treatment):
• Tensile Strength: 650 – 900 MPa
• Yield Strength: ≥ 450 MPa
• Elongation: 12 – 18%
• Hardness: Can be increased by quenching and tempering

Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNi12 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With good mechanical strength, heat-treatable properties, and dependable corrosion resistance, X2CrNi12 stainless steel bar is a reliable choice for engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation.

Request
Callback

Yes! I am Interested

EN 10088-3 Ss Rod And Bars

EN 10088-3 X6Cr13 Stainless Steel Rod

EN 10088-3 X12CrS13 Stainless Steel Bar

EN 10088-3 X6Cr17 Stainless Steel Rod

EN 10088-3 X15Cr13 Stainless Steel Bar

EN 10088-3 X39CrMo17-1 Stainless Steel Bar

EN 10088-3 X6CrMo17-1 Stainless Steel Rod

EN 10088-3 X55CrMo14 Stainless Steel Bar

EN 10088-3 X6CrMoS17 Stainless Steel Rod & Bar

EN 10088-3 X17CrNi16-2 Stainless Steel Rod

EN 10088-3 X2CrNi19-11 Stainless Steel Rod

EN 10088-3 X105CrMo17 Stainless Steel Rod

EN 10088-3 X4CrNi18-12 Stainless Steel Bar

EN 10088-3 X46Cr13 Stainless Steel Bar

EN 10088-3 X29CrS13 Stainless Steel Rod

EN 10088-3 X10CrNi18-8 Stainless Steel Bar

EN 10088-3 X8CrMnNiN18-9-5 Stainless Steel Rod

EN 10088-3 X11CrNiMnN19-8-6 Stainless Steel Bar

EN 10088-3 X1CrNiSi18-15-4 Stainless Steel Rod

EN 10088-3 X5CrNi17-7 Stainless Steel Bar

EN 10088-3 X3CrNiMo13-4 Stainless Steel Rod

EN 10088-3 X2CrNiMoN25-7-4 SS Rod

EN 10088-3 X2CrNiMo17-12-2 Stainless Steel Bar

EN 10088-3 X2CrNiMoCuN25-6-3 Stainless Steel Rod

EN 10088-3 X2CrNiMoN29-7-2 Stainless Steel Bar

EN 10088-3 X2CrNiMoN17-13-5 Stainless Steel Bar

EN 10088-3 X4CrNiMo16-5-1 Stainless Steel Bar

EN 10088-3 X3CrNb17 Stainless Steel Bar

EN 10088-3 X2CrNiMoN22-5-3 Stainless Steel Rod

EN 10088-3 X3CrNiMo17-13-3 Stainless Steel Rod

EN 10088-3 X3CrNb17 Stainless Steel Rod

EN 10088-3 X2CrMoTiS18-2 Stainless Steel Rod

EN 10088-3 X1NiCrMoCuN25-20-7 Stainless Steel Bar

EN 10088-3 X1CrNiMoCuN25-25-5 Stainless Steel Rod

EN 10088-3 X6CrNiTi18-10 Stainless Steel Bar

EN 10088-3 X1CrNiMoCuN20-18-7 Stainless Steel Rod

EN 10088-3 X1CrNiMoCuN24-22-8 Stainless Steel Rod

EN 10088-3 X2CrNiMoCuS17-10-2 Stainless Steel Bar

EN 10088-3 X6CrNiMoNb17-12-2 Stainless Steel Bar

EN 10088-3 X3CrNiCu19-9-2 Stainless Steel Bar

EN 10088-3 X2CrNi12 Stainless Steel Bar

Product Videos

Tungsten Copper Sheet

Titanium Beaker ,Pure Titanium Beaker , Titanium Hand Beaker for Gold refinery

Titanium Jigs, Titanium Jigs For Anodizing

Explore More Products