Ladhani Metal Corporation
Girgaon, Mumbai, Maharashtra
GST No. 27AOZPB3027K1ZM
TrustSEAL Verified
Call 07942537951 91% Response Rate
SEND EMAIL
Product Details:
| Shape | Round |
| Diameter | 20 mm |
| Length | 3000 mm (3 m) |
| Grade | EN 10084 C16R |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components. |
EN 10084 C16R is a low carbon steel grade designed for components requiring a hard, wear-resistant surface with a tough and ductile core after carburizing and heat treatment. With a nominal carbon content of approximately 0.16%, this grade provides reliable core strength while maintaining excellent response to carburizing processes.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, C16R steel is widely used in automotive, mechanical, and general engineering industries. The controlled chemical composition ensures good machinability and consistent hardening characteristics, resulting in high surface hardness and dependable core toughness after treatment.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 C16R round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (C16R):
• C – Carbon steel
• 16 – Approx. 0.16% carbon content
• R – Special quality steel with specified sulphur range for improved machinability
Chemical Composition (% – typical limits):
• Carbon (C): 0.14 – 0.19
• Manganese (Mn): 0.30 – 0.60
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): 0.020 – 0.040
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 380 – 520 MPa
• Yield Strength: ≥ 250 MPa
• Elongation: ≥ 24%
• Hardness (Core): 120 – 180 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 C16R round bars in various diameters and finishes. With reliable carburizing properties and enhanced machinability, C16R steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 25 mm |
| Length | 3000 mm (3 m) |
| Grade | EN 10084 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components. |
EN 10084 C10R is a low carbon steel grade designed for components requiring a hard, wear-resistant surface with a tough and ductile core after carburizing and heat treatment. With a nominal carbon content of approximately 0.10%, this grade is suitable for applications where surface hardness is developed through case hardening while maintaining good core strength and impact resistance.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, C10R steel is widely used in automotive and mechanical engineering industries. The low carbon content ensures good formability and machinability before heat treatment, while carbon enrichment during carburizing significantly improves surface wear resistance.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 C10R round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (C10R):
• C – Carbon steel
• 10 – Approx. 0.10% carbon content
• R – Special quality with controlled composition suitable for carburizing
Chemical Composition (% – typical limits):
• Carbon (C): 0.07 – 0.13
• Manganese (Mn): 0.30 – 0.60
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 340 – 470 MPa
• Yield Strength: ≥ 210 MPa
• Elongation: ≥ 27%
• Hardness (Core): 100 – 160 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 C10R round bars in various diameters and finishes. With reliable carburizing capability and good core toughness, C10R steel is widely used in automotive and general engineering industries. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 50 mm |
| Length | 3000 mm (3 m) |
| Grade | EN 10084 28Cr4 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 28Cr4 is a low alloy chromium carburizing steel grade designed for components requiring a hard, wear-resistant surface with a strong and tough core after carburizing and heat treatment. With approximately 0.28% carbon and chromium addition, this grade offers higher core strength and improved hardenability compared to lower carbon carburizing steels such as 17Cr3.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 28Cr4 steel is widely used in automotive, heavy machinery, and general engineering industries. The chromium content enhances depth of hardening and wear resistance, ensuring consistent mechanical performance after quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 28Cr4 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (28Cr4):
• 28 – Approx. 0.28% carbon content
• Cr – Chromium alloyed steel
• 4 – Chromium content range classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.25 – 0.30
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.70 – 1.10
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 700 – 900 MPa
• Yield Strength: ≥ 450 MPa
• Elongation: ≥ 11%
• Hardness (Core): 190 – 240 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 28Cr4 round bars in various diameters and finishes. With improved strength and hardenability, 28Cr4 steel is widely used in automotive and industrial engineering applications requiring durable, case-hardened components. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 25 mm |
| Length | 6000 mm (6 m) |
| Grade | EN 10084 28CrS4 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components. |
EN 10084 28CrS4 is a low alloy chromium carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface and a strong, tough core after carburizing and heat treatment. With approximately 0.28% carbon and chromium addition, this grade offers higher core strength and improved hardenability, while the increased sulphur content enhances machinability compared to 28Cr4.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 28CrS4 steel is widely used in automotive, heavy engineering, and general mechanical industries. The balanced chemical composition ensures efficient machining in the annealed condition and consistent hardening characteristics after carburizing and quenching.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 28CrS4 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (28CrS4):
• 28 – Approx. 0.28% carbon content
• Cr – Chromium alloyed steel
• S – Increased sulphur content for improved machinability
• 4 – Chromium content range classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.25 – 0.30
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.70 – 1.10
• Phosphorus (P): ≤ 0.025
• Sulphur (S): 0.020 – 0.040
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 700 – 900 MPa
• Yield Strength: ≥ 450 MPa
• Elongation: ≥ 10%
• Hardness (Core): 190 – 240 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 28CrS4 round bars in various diameters and finishes. With improved strength, machinability, and hardenability, 28CrS4 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 40 mm |
| Length | 2000 mm |
| Grade | EN 10084 16MnCrS5 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components. |
EN 10084 16MnCrS5 is a low alloy manganese-chromium carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface and a tough, high-strength core after carburizing and heat treatment. With approximately 0.16% carbon along with manganese and chromium additions, this grade offers excellent hardenability, while the increased sulphur content improves machinability compared to 16MnCr5.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 16MnCrS5 steel is widely used in automotive, transmission, and general engineering industries.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 16MnCrS5 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (16MnCrS5):
• 16 – Approx. 0.16% carbon content
• Mn – Manganese alloyed steel
• Cr – Chromium alloyed steel
• S – Increased sulphur content for improved machinability
• 5 – Alloy content classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.14 – 0.19
• Manganese (Mn): 1.00 – 1.30
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.80 – 1.10
• Phosphorus (P): ≤ 0.025
• Sulphur (S): 0.020 – 0.040
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 700 – 900 MPa
• Yield Strength: ≥ 450 MPa
• Elongation: ≥ 9%
• Hardness (Core): 190 – 240 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 16MnCrS5 round bars in various diameters and finishes. With reliable hardenability, improved machinability, and excellent case hardening properties, 16MnCrS5 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 60 mm |
| Length | 3500 mm |
| Grade | EN 10084 16MnCrB5 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering component |
EN 10084 16MnCrB5 is a low alloy manganese-chromium-boron carburizing steel grade designed for components requiring a hard, wear-resistant surface and a tough, high-strength core after carburizing and heat treatment. With approximately 0.16% carbon along with manganese, chromium, and a small addition of boron, this grade offers enhanced hardenability and improved core strength compared to conventional Mn-Cr carburizing steels.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 16MnCrB5 steel is widely used in automotive, heavy engineering, and transmission industries. The boron addition significantly improves hardenability, enabling deeper and more uniform case hardening after quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 16MnCrB5 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (16MnCrB5):
• 16 – Approx. 0.16% carbon content
• Mn – Manganese alloyed steel
• Cr – Chromium alloyed steel
• B – Boron added for improved hardenability
• 5 – Alloy content classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.14 – 0.19
• Manganese (Mn): 1.00 – 1.30
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.80 – 1.10
• Boron (B): 0.0008 – 0.005
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 750 – 950 MPa
• Yield Strength: ≥ 500 MPa
• Elongation: ≥ 9%
• Hardness (Core): 200 – 260 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 16MnCrB5 round bars in various diameters and finishes. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 16 mm |
| Length | 3000 mm (3 m) |
| Grade | EN 10084 20MnCr5 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering component |
EN 10084 20MnCr5 is a low alloy manganese-chromium carburizing steel grade designed for components requiring a hard, wear-resistant surface combined with a tough and high-strength core after carburizing and heat treatment. With approximately 0.20% carbon along with manganese and chromium additions, this grade offers excellent hardenability and improved core strength compared to lower carbon carburizing steels such as 16MnCr5.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20MnCr5 steel is widely used in automotive, transmission, and heavy engineering industries. The balanced alloy composition ensures uniform case hardening, reliable core toughness, and consistent mechanical performance after quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20MnCr5 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (20MnCr5):
• 20 – Approx. 0.20% carbon content
• Mn – Manganese alloyed steel
• Cr – Chromium alloyed steel
• 5 – Alloy content classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.17 – 0.22
• Manganese (Mn): 1.10 – 1.40
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 1.00 – 1.30
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 800 – 1000 MPa
• Yield Strength: ≥ 550 MPa
• Elongation: ≥ 9%
• Hardness (Core): 220 – 280 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 20MnCr5 round bars in various diameters and finishes. With excellent hardenability and reliable performance after heat treatment, 20MnCr5 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 40 mm |
| Length | 6000 mm (6 m) |
| Grade | EN 10084 18CrMoS4 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 18CrMoS4 is a low alloy chromium-molybdenum carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface and a tough, high-strength core after carburizing and heat treatment. With approximately 0.18% carbon along with chromium and molybdenum additions, this grade offers excellent hardenability, while the increased sulphur content improves machinability compared to 18CrMo4. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 18CrMoS4 steel is widely used in automotive, heavy engineering, and power transmission industries.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 18CrMoS4 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (18CrMoS4):
• 18 – Approx. 0.18% carbon content
• Cr – Chromium alloyed steel
• Mo – Molybdenum alloyed steel
• S – Increased sulphur content for improved machinability
• 4 – Alloy content classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.15 – 0.21
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.90 – 1.20
• Molybdenum (Mo): 0.15 – 0.30
• Phosphorus (P): ≤ 0.025
• Sulphur (S): 0.020 – 0.040
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 850 – 1050 MPa
• Yield Strength: ≥ 600 MPa
• Elongation: ≥ 8%
• Hardness (Core): 230 – 290 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 18CrMoS4 round bars in various diameters and finishes. With reliable hardenability, improved machinability, and strong core properties, 18CrMoS4 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 60 mm |
| Length | 3000 mm (3 m) |
| Grade | EN 10084 17CrS3 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components. |
EN 10084 17CrS3 is a low alloy chromium carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface and a tough core after carburizing and heat treatment. With approximately 0.17% carbon and chromium addition, this grade offers improved hardenability, while the higher sulphur content enhances machinability compared to 17Cr3.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 17CrS3 steel is widely used in automotive, mechanical, and general engineering industries. The balanced chemical composition ensures good cutting performance in the annealed condition and reliable hardening characteristics after carburizing and quenching.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 17CrS3 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (17CrS3):
• 17 – Approx. 0.17% carbon content
• Cr – Chromium alloyed steel
• S – Increased sulphur content for improved machinability
• 3 – Chromium content range classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.14 – 0.19
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.70 – 1.00
• Phosphorus (P): ≤ 0.025
• Sulphur (S): 0.020 – 0.040
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 540 – 780 MPa
• Yield Strength: ≥ 350 MPa
• Elongation: ≥ 10%
• Hardness (Core): 160 – 220 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 17CrS3 round bars in various diameters and finishes. With reliable hardenability and improved machinability, 17CrS3 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 16 mm |
| Length | 3000 mm (3 m) |
| Grade | EN 10084 20MoCrS3 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 20MoCrS3 is a low alloy molybdenum-chromium carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface combined with a strong and tough core after carburizing and heat treatment. With approximately 0.20% carbon along with molybdenum and chromium additions, this grade offers excellent hardenability, while the increased sulphur content improves machinability compared to 20MoCr3.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20MoCrS3 steel is widely used in automotive, heavy engineering, and power transmission industries.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20MoCrS3 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (20MoCrS3):
• 20 – Approx. 0.20% carbon content
• Mo – Molybdenum alloyed steel
• Cr – Chromium alloyed steel
• S – Increased sulphur content for improved machinability
• 3 – Alloy content classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.17 – 0.23
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.60 – 0.90
• Molybdenum (Mo): 0.15 – 0.30
• Phosphorus (P): ≤ 0.025
• Sulphur (S): 0.020 – 0.040
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 850 – 1050 MPa
• Yield Strength: ≥ 600 MPa
• Elongation: ≥ 8%
• Hardness (Core): 220 – 280 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 20MoCrS3 round bars in various diameters and finishes. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 40 mm |
| Length | 3000 mm (3 m) |
| Grade | EN 10084 20MoCrS4 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 20MoCrS4 is a low alloy molybdenum-chromium carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface combined with a strong and tough core after carburizing and heat treatment. With approximately 0.20% carbon along with molybdenum and chromium additions, this grade offers excellent hardenability, while the increased sulphur content improves machinability compared to 20MoCr4.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20MoCrS4 steel is widely used in automotive, heavy engineering, and power transmission industries.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20MoCrS4 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (20MoCrS4):
• 20 – Approx. 0.20% carbon content
• Mo – Molybdenum alloyed steel
• Cr – Chromium alloyed steel
• S – Increased sulphur content for improved machinability
• 4 – Alloy content classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.17 – 0.23
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.90 – 1.20
• Molybdenum (Mo): 0.20 – 0.35
• Phosphorus (P): ≤ 0.025
• Sulphur (S): 0.020 – 0.040
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 900 – 1100 MPa
• Yield Strength: ≥ 650 MPa
• Elongation: ≥ 8%
• Hardness (Core): 240 – 300 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 20MoCrS4 round bars in various diameters and finishes. With reliable hardenability, improved machinability, and strong mechanical performance, 20MoCrS4 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 40 mm |
| Length | 3000 mm (3 m) |
| Grade | EN 10084 17CrNi6-6 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 17CrNi6-6 is a high-performance chromium-nickel alloy carburizing steel grade designed for components requiring a very hard, wear-resistant surface combined with an exceptionally tough and high-strength core after carburizing and heat treatment. With approximately 0.17% carbon along with higher chromium and nickel content, this grade offers superior hardenability, deep case hardening capability, and outstanding fatigue strength under heavy dynamic loads.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 17CrNi6-6 steel is widely used in automotive, heavy-duty gear manufacturing, and critical engineering applications. Nickel significantly improves core toughness and impact resistance, while chromium enhances wear resistance and ensures deeper and more uniform case hardening.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 17CrNi6-6 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (17CrNi6-6):
• 17 – Approx. 0.17% carbon content
• Cr – Chromium alloyed steel
• Ni – Nickel alloyed steel
• 6-6 – Alloy content classification (chromium and nickel levels)
Chemical Composition (% – typical limits):
• Carbon (C): 0.14 – 0.19
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 1.50 – 1.80
• Nickel (Ni): 1.40 – 1.70
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 900 – 1100 MPa
• Yield Strength: ≥ 650 MPa
• Elongation: ≥ 9%
• Hardness (Core): 250 – 320 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 17CrNi6-6 round bars in various diameters and finishes. With excellent hardenability, deep case hardening properties, and superior core toughness, 17CrNi6-6 steel is widely preferred for demanding automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 25 mm |
| Length | 3000 mm (3 m) |
| Grade | EN 10084 20NiCrMo2-2 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 20NiCrMo2-2 is a nickel-chromium-molybdenum alloy carburizing steel grade designed for components requiring a very hard, wear-resistant surface combined with a tough and high-strength core after carburizing and heat treatment. With approximately 0.20% carbon along with nickel, chromium, and molybdenum additions, this grade offers excellent hardenability, improved fatigue strength, and enhanced resistance to impact and dynamic loading.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20NiCrMo2-2 steel is widely used in automotive, gearbox, and heavy engineering industries.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20NiCrMo2-2 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (20NiCrMo2-2):
• 20 – Approx. 0.20% carbon content
• Ni – Nickel alloyed steel
• Cr – Chromium alloyed steel
• Mo – Molybdenum alloyed steel
• 2-2 – Alloy content classification (nickel/chromium and molybdenum levels)
Chemical Composition (% – typical limits):
• Carbon (C): 0.17 – 0.23
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Nickel (Ni): 0.40 – 0.70
• Chromium (Cr): 0.40 – 0.70
• Molybdenum (Mo): 0.15 – 0.30
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 900 – 1100 MPa
• Yield Strength: ≥ 650 MPa
• Elongation: ≥ 9%
• Hardness (Core): 250 – 320 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 20NiCrMo2-2 round bars in various diameters and finishes. With strong hardenability, reliable fatigue performance, and excellent mechanical properties after heat treatment, 20NiCrMo2-2 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 50 mm |
| Length | 6000 mm (6 m) |
| Grade | EN 10084 20NiCrMoS2-2 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 20NiCrMoS2-2 is a nickel-chromium-molybdenum alloy carburizing steel with controlled sulphur content, developed for components requiring a very hard, wear-resistant surface combined with a tough and high-strength core after carburizing and heat treatment.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20NiCrMoS2-2 steel is widely used in automotive, gearbox manufacturing, and heavy engineering industries.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20NiCrMoS2-2 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (20NiCrMoS2-2):
• 20 – Approx. 0.20% carbon content
• Ni – Nickel alloyed steel
• Cr – Chromium alloyed steel
• Mo – Molybdenum alloyed steel
• S – Increased sulphur content for improved machinability
• 2-2 – Alloy content classification (nickel/chromium and molybdenum levels)
Chemical Composition (% – typical limits):
• Carbon (C): 0.17 – 0.23
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Nickel (Ni): 0.40 – 0.70
• Chromium (Cr): 0.40 – 0.70
• Molybdenum (Mo): 0.15 – 0.30
• Phosphorus (P): ≤ 0.025
• Sulphur (S): 0.020 – 0.040
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 900 – 1100 MPa
• Yield Strength: ≥ 650 MPa
• Elongation: ≥ 9%
• Hardness (Core): 250 – 320 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 20NiCrMoS2-2 round bars in various diameters and finishes. With reliable hardenability, improved machinability, and strong mechanical performance after heat treatment, 20NiCrMoS2-2 steel is widely used in demanding automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 40 mm |
| Length | 3000 mm (3 m) |
| Grade | EN 10084 16NiCrS4 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 16NiCrS4 is a nickel-chromium alloy carburizing steel with controlled sulphur content, designed for components requiring a hard, wear-resistant surface combined with a tough and impact-resistant core after carburizing and heat treatment. With approximately 0.16% carbon along with nickel and chromium additions, this grade offers excellent hardenability and core strength, while the sulphur addition improves machinability compared to 16NiCr4.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 16NiCrS4 steel is widely used in automotive, heavy engineering, and transmission industries. The nickel improves toughness and fatigue resistance, chromium enhances depth of hardening and wear resistance, and the sulphur addition ensures efficient machining prior to heat treatment.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 16NiCrS4 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (16NiCrS4):
• 16 – Approx. 0.16% carbon content
• Ni – Nickel alloyed steel
• Cr – Chromium alloyed steel
• S – Increased sulphur content for improved machinability
• 4 – Alloy content classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.14 – 0.19
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Nickel (Ni): 0.90 – 1.20
• Chromium (Cr): 0.60 – 0.90
• Phosphorus (P): ≤ 0.025
• Sulphur (S): 0.020 – 0.040
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 750 – 950 MPa
• Yield Strength: ≥ 500 MPa
• Elongation: ≥ 10%
• Hardness (Core): 200 – 260 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 16NiCrS4 round bars in various diameters and finishes. With reliable hardenability, improved machinability, and strong mechanical performance, 16NiCrS4 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 20 mm |
| Length | 3000 mm (3 m) |
| Grade | EN 10084 17NiCrMo6-4 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 17NiCrMo6-4 is a high-performance nickel-chromium-molybdenum alloy carburizing steel grade developed for components requiring a very hard, wear-resistant surface combined with an exceptionally tough and high-strength core after carburizing and heat treatment. With approximately 0.17% carbon and higher alloy content, this grade offers superior hardenability, deep case hardening capability, and outstanding fatigue strength under heavy dynamic loads.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 17NiCrMo6-4 steel is widely used in automotive, heavy-duty gear manufacturing, and critical engineering applications.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 17NiCrMo6-4 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (17NiCrMo6-4):
• 17 – Approx. 0.17% carbon content
• Ni – Nickel alloyed steel
• Cr – Chromium alloyed steel
• Mo – Molybdenum alloyed steel
• 6-4 – Alloy content classification (nickel/chromium and molybdenum levels)
Chemical Composition (% – typical limits):
• Carbon (C): 0.14 – 0.19
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Nickel (Ni): 1.40 – 1.70
• Chromium (Cr): 1.50 – 1.80
• Molybdenum (Mo): 0.25 – 0.35
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 950 – 1150 MPa
• Yield Strength: ≥ 700 MPa
• Elongation: ≥ 8%
• Hardness (Core): 280 – 340 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 17NiCrMo6-4 round bars in various diameters and finishes. With excellent hardenability, deep carburizing capability, and superior mechanical strength, 17NiCrMo6-4 steel is widely preferred for demanding automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 40 mm |
| Length | 3000 mm (3 m) |
| Grade | EN 10084 18CrNiMo7-6 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 18CrNiMo7-6 is a premium chromium-nickel-molybdenum alloy carburizing steel grade designed for highly stressed components requiring an extremely hard, wear-resistant surface combined with a very tough and high-strength core after carburizing and heat treatment. With approximately 0.18% carbon and high alloy content, this grade offers exceptional hardenability, deep case hardening capability, and outstanding fatigue strength under heavy dynamic and shock loading conditions.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 18CrNiMo7-6 steel is widely used in heavy-duty gear manufacturing, wind turbine gearboxes, mining equipment, and critical automotive transmission applications.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 18CrNiMo7-6 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (18CrNiMo7-6):
• 18 – Approx. 0.18% carbon content
• Cr – Chromium alloyed steel
• Ni – Nickel alloyed steel
• Mo – Molybdenum alloyed steel
• 7-6 – Alloy content classification (chromium/nickel and molybdenum levels)
Chemical Composition (% – typical limits):
• Carbon (C): 0.15 – 0.21
• Manganese (Mn): 0.50 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 1.50 – 1.80
• Nickel (Ni): 1.40 – 1.70
• Molybdenum (Mo): 0.25 – 0.35
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 1000 – 1200 MPa
• Yield Strength: ≥ 800 MPa
• Elongation: ≥ 8%
• Hardness (Core): 300 – 360 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 18CrNiMo7-6 round bars in various diameters and finishes. With superior hardenability, deep carburizing capability, and exceptional mechanical strength, 18CrNiMo7-6 steel is widely preferred for demanding industrial and automotive engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 40 mm |
| Length | 3000 mm (3 m) |
| Grade | EN 10084 14NiCrMo13-4 |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 18CrNiMo7-6 is a premium chromium-nickel-molybdenum alloy carburizing steel grade designed for highly stressed components requiring an extremely hard, wear-resistant surface combined with a very tough and high-strength core after carburizing and heat treatment.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 18CrNiMo7-6 steel is widely used in heavy-duty gear manufacturing, wind turbine gearboxes, mining equipment, and critical automotive transmission applications.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 18CrNiMo7-6 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (18CrNiMo7-6):
• 18 – Approx. 0.18% carbon content
• Cr – Chromium alloyed steel
• Ni – Nickel alloyed steel
• Mo – Molybdenum alloyed steel
• 7-6 – Alloy content classification (chromium/nickel and molybdenum levels)
Chemical Composition (% – typical limits):
• Carbon (C): 0.15 – 0.21
• Manganese (Mn): 0.50 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 1.50 – 1.80
• Nickel (Ni): 1.40 – 1.70
• Molybdenum (Mo): 0.25 – 0.35
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 1000 – 1200 MPa
• Yield Strength: ≥ 800 MPa
• Elongation: ≥ 8%
• Hardness (Core): 300 – 360 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 18CrNiMo7-6 round bars in various diameters and finishes. With superior hardenability, deep carburizing capability, and exceptional mechanical strength, 18CrNiMo7-6 steel is widely preferred for demanding industrial and automotive engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Material | Carbon Steel |
| Diameter | 12 mm |
| Length | 3000 mm |
| Material Grade | EN 10084 |
| Usage | Construction, Shafting, Machinery, Railway, Fabrication, Automobile |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 C10E is a low carbon case hardening steel grade designed for components that require a hard, wear-resistant surface with a tough and ductile core. With a nominal carbon content of approximately 0.10%, this grade is ideal for carburizing applications where surface hardness is developed through heat treatment while maintaining core strength.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for case hardening steels, C10E steel is widely used in automotive and mechanical engineering industries. The low carbon content ensures good formability and weldability before carburizing, while surface carbon enrichment during heat treatment significantly improves wear resistance.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10084 C10E round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (C10E):
• C – Carbon steel
• 10 – Approx. 0.10% carbon content
• E – Special quality steel with controlled sulphur and phosphorus (low impurity level)
Chemical Composition (% – typical limits):
• Carbon (C): 0.07 – 0.13
• Manganese (Mn): 0.30 – 0.60
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 340 – 470 MPa
• Yield Strength: ≥ 210 MPa
• Elongation: ≥ 27%
• Hardness (Core): 100 – 160 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 C10E round bars in various diameters and finishes. With excellent carburizing capability and reliable core toughness, C10E steel is widely used in automotive and general engineering industries. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Grade | EN 10084 |
| Diameter | 16 mm |
| Length | 5500 mm (5.5 m) |
| Shape | Round |
| Test Certificate | Available |
| type | case hardening steel |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10084 C15E is a low carbon steel grade designed for components requiring a hard, wear-resistant surface with a tough and ductile core after carburizing and heat treatment. With a nominal carbon content of approximately 0.15%, this grade provides slightly higher core strength compared to C10 grades while maintaining excellent case hardening capability.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, C15E steel is widely used in automotive, mechanical, and general engineering industries. The controlled chemical composition ensures good machinability and consistent response to carburizing, resulting in improved surface hardness and wear resistance after heat treatment.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 C15E round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (C15E):
• C – Carbon steel
• 15 – Approx. 0.15% carbon content
• E – Special quality steel with controlled sulphur and phosphorus (low impurity level)
Chemical Composition (% – typical limits):
• Carbon (C): 0.12 – 0.18
• Manganese (Mn): 0.30 – 0.60
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 370 – 500 MPa
• Yield Strength: ≥ 240 MPa
• Elongation: ≥ 25%
• Hardness (Core): 110 – 170 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 C15E round bars in various diameters and finishes. With reliable carburizing properties and enhanced core strength, C15E steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Shape | Round |
| Diameter | 25 mm |
| Length | 6000 mm (6 m) |
| Grade | C15R |
| Test Certificate | Available |
| standard | EN 10084 |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10084 C15R is a low carbon steel grade designed for components requiring a hard, wear-resistant surface with a tough and ductile core after carburizing and heat treatment. With a nominal carbon content of approximately 0.15%, this grade offers improved core strength compared to C10 grades while maintaining excellent carburizing characteristics.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, C15R steel is widely used in automotive and mechanical engineering industries. The controlled composition ensures good machinability and consistent response to surface hardening processes, resulting in high surface hardness and good wear resistance after treatment.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10084 C15R round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (C15R):
• C – Carbon steel
• 15 – Approx. 0.15% carbon content
• R – Special quality suitable for carburizing applications
Chemical Composition (% – typical limits):
• Carbon (C): 0.12 – 0.18
• Manganese (Mn): 0.30 – 0.60
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 370 – 500 MPa
• Yield Strength: ≥ 240 MPa
• Elongation: ≥ 25%
• Hardness (Core): 110 – 170 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 C15R round bars in various diameters and finishes. With reliable carburizing capability and enhanced core strength, C15R steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Grade | C16E |
| Diameter | 40 mm |
| Length | 2500mm |
| Shape | Round |
| Test Certificate | Available |
| material type | case hardening steel |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10084 C16E is a low carbon steel grade designed for components requiring a hard, wear-resistant surface with a tough and ductile core after carburizing and heat treatment. With a nominal carbon content of approximately 0.16%, this grade provides slightly higher core strength compared to C15 grades while maintaining excellent response to carburizing processes.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, C16E steel is widely used in automotive, mechanical, and general engineering industries. The controlled chemical composition ensures good machinability and consistent hardening characteristics, resulting in high surface hardness and reliable core toughness after treatment.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 C16E round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (C16E):
• C – Carbon steel
• 16 – Approx. 0.16% carbon content
• E – Special quality steel with controlled sulphur and phosphorus (low impurity level)
Chemical Composition (% – typical limits):
• Carbon (C): 0.14 – 0.19
• Manganese (Mn): 0.30 – 0.60
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 380 – 520 MPa
• Yield Strength: ≥ 250 MPa
• Elongation: ≥ 24%
• Hardness (Core): 120 – 180 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 C16E round bars in various diameters and finishes. With reliable carburizing properties and enhanced core strength, C16E steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Grade | EN 10084 17Cr3 |
| Shape | Round |
| Diameter | 40 mm |
| Length | 3500mm |
| Test Certificate | Available |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components. |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10084 17Cr3 is a low alloy chromium carburizing steel grade designed for components requiring a hard, wear-resistant surface combined with a tough and shock-resistant core after carburizing and heat treatment. With approximately 0.17% carbon and added chromium content, this grade offers improved hardenability and enhanced wear resistance compared to plain carbon carburizing steels.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 17Cr3 steel is widely used in automotive, mechanical, and general engineering industries. The controlled chromium addition improves depth of hardening and core strength, ensuring consistent mechanical performance after quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 17Cr3 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (17Cr3):
• 17 – Approx. 0.17% carbon content
• Cr – Chromium alloyed steel
• 3 – Approx. 0.70 – 1.00% chromium content range classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.14 – 0.19
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.70 – 1.00
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 540 – 780 MPa
• Yield Strength: ≥ 350 MPa
• Elongation: ≥ 11%
• Hardness (Core): 160 – 220 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 17Cr3 round bars in various diameters and finishes. With enhanced hardenability and wear resistance, 17Cr3 steel is widely used in automotive and heavy engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Grade | EN 10084 16MnCr5 |
| Shape | Round |
| Diameter | 20 mm |
| Length | 3000 mm (3 m) |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 16MnCr5 is a low alloy manganese-chromium carburizing steel grade designed for components requiring a hard, wear-resistant surface combined with a tough and high-strength core after carburizing and heat treatment. With approximately 0.16% carbon along with manganese and chromium additions, this grade offers excellent hardenability and improved core strength compared to plain carbon carburizing steels.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 16MnCr5 steel is widely used in automotive, transmission, and general engineering industries. The balanced alloy composition ensures uniform case hardening, reliable core toughness, and consistent mechanical performance after quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 16MnCr5 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (16MnCr5):
• 16 – Approx. 0.16% carbon content
• Mn – Manganese alloyed steel
• Cr – Chromium alloyed steel
• 5 – Alloy content classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.14 – 0.19
• Manganese (Mn): 1.00 – 1.30
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.80 – 1.10
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 700 – 900 MPa
• Yield Strength: ≥ 450 MPa
• Elongation: ≥ 10%
• Hardness (Core): 190 – 240 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 16MnCr5 round bars in various diameters and finishes. With excellent hardenability and reliable performance after heat treatment, 16MnCr5 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Grade | EN 10084 20MnCrS5 |
| Diameter | 20 mm |
| Length | 3000 mm (3 m) |
| Shape | Round |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 20MnCrS5 is a low alloy manganese-chromium carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface combined with a tough and high-strength core after carburizing and heat treatment.Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20MnCrS5 steel is widely used in automotive, transmission, and heavy engineering industries. The balanced alloy composition ensures uniform case hardening, reliable core strength, and consistent mechanical performance after quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20MnCrS5 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (20MnCrS5):
• 20 – Approx. 0.20% carbon content
• Mn – Manganese alloyed steel
• Cr – Chromium alloyed steel
• S – Increased sulphur content for improved machinability
• 5 – Alloy content classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.17 – 0.22
• Manganese (Mn): 1.10 – 1.40
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 1.00 – 1.30
• Phosphorus (P): ≤ 0.025
• Sulphur (S): 0.020 – 0.040
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 800 – 1000 MPa
• Yield Strength: ≥ 550 MPa
• Elongation: ≥ 8%
• Hardness (Core): 220 – 280 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 20MnCrS5 round bars in various diameters and finishes. With reliable hardenability, improved machinability, and excellent case hardening properties, 20MnCrS5 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Grade | EN 10084 18CrMo4 |
| Diameter | 80 mm |
| Length | 3000 mm (3 m) |
| Shape | Round |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 18CrMo4 is a low alloy chromium-molybdenum carburizing steel grade designed for components requiring a hard, wear-resistant surface with a tough and high-strength core after carburizing and heat treatment. With approximately 0.18% carbon along with chromium and molybdenum additions, this grade offers excellent hardenability, improved core strength, and enhanced resistance to wear and fatigue.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 18CrMo4 steel is widely used in automotive, heavy engineering, and power transmission industries.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 18CrMo4 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (18CrMo4):
• 18 – Approx. 0.18% carbon content
• Cr – Chromium alloyed steel
• Mo – Molybdenum alloyed steel
• 4 – Alloy content classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.15 – 0.21
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.90 – 1.20
• Molybdenum (Mo): 0.15 – 0.30
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 850 – 1050 MPa
• Yield Strength: ≥ 600 MPa
• Elongation: ≥ 9%
• Hardness (Core): 230 – 290 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 18CrMo4 round bars in various diameters and finishes. With enhanced hardenability, strength, and wear resistance, 18CrMo4 steel is widely used in automotive and industrial engineering applications requiring durable, case-hardened components. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Grade | EN 10084 20MoCr3 |
| Diameter | 25 mm |
| Shape | Round |
| Length | 3000 mm (3 m) |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 20MoCr3 is a low alloy molybdenum-chromium carburizing steel grade designed for components requiring a hard, wear-resistant surface combined with a strong and tough core after carburizing and heat treatment. With approximately 0.20% carbon along with molybdenum and chromium additions, this grade offers excellent hardenability, improved core strength, and enhanced resistance to wear and fatigue.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20MoCr3 steel is widely used in automotive, heavy engineering, and power transmission industries. The chromium improves depth of hardening and wear resistance, while molybdenum enhances strength and tempering resistance, ensuring consistent mechanical performance after quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20MoCr3 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (20MoCr3):
• 20 – Approx. 0.20% carbon content
• Mo – Molybdenum alloyed steel
• Cr – Chromium alloyed steel
• 3 – Alloy content classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.17 – 0.23
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.60 – 0.90
• Molybdenum (Mo): 0.15 – 0.30
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 850 – 1050 MPa
• Yield Strength: ≥ 600 MPa
• Elongation: ≥ 9%
• Hardness (Core): 220 – 280 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 20MoCr3 round bars in various diameters and finishes. With enhanced hardenability and strong mechanical properties, 20MoCr3 steel is widely used in automotive and industrial engineering applications requiring durable, case-hardened components. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Grade | EN 10084 22CrMoS3-5 |
| Diameter | 50 mm |
| Length | 3000 mm (3 m) |
| Shape | Round |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 22CrMoS3-5 is a low alloy chromium-molybdenum carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface along with a strong and tough core after carburizing and heat treatment. With approximately 0.22% carbon and alloying elements such as chromium and molybdenum, this grade provides enhanced hardenability, improved core strength, and excellent fatigue resistance. The added sulphur improves machinability compared to non-sulphurized grades.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 22CrMoS3-5 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (22CrMoS3-5):
• 22 – Approx. 0.22% carbon content
• Cr – Chromium alloyed steel
• Mo – Molybdenum alloyed steel
• S – Increased sulphur content for improved machinability
• 3-5 – Alloy content classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.19 – 0.25
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.60 – 0.90
• Molybdenum (Mo): 0.15 – 0.30
• Phosphorus (P): ≤ 0.025
• Sulphur (S): 0.020 – 0.040
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 900 – 1100 MPa
• Yield Strength: ≥ 650 MPa
• Elongation: ≥ 8%
• Hardness (Core): 240 – 300 HB
After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions.
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 22CrMoS3-5 round bars in various diameters and finishes. With enhanced hardenability, strong core strength, and improved machinability, 22CrMoS3-5 steel is widely used in automotive and industrial engineering applications requiring durable, case-hardened components. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Grade | EN 10084 20MoCr4 |
| Shape | Round |
| Diameter | 20 mm |
| Length | 2500 mm |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 20MoCr4 is a low alloy molybdenum-chromium carburizing steel grade designed for components requiring a hard, wear-resistant surface combined with a strong and tough core after carburizing and heat treatment. With approximately 0.20% carbon along with molybdenum and chromium additions, this grade offers excellent hardenability, improved core strength, and enhanced resistance to wear and fatigue compared to lower alloy carburizing steels.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20MoCr4 steel is widely used in automotive, heavy engineering, and power transmission industries. The chromium improves depth of hardening and wear resistance, while molybdenum enhances strength, tempering resistance, and overall mechanical stability after quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20MoCr4 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (20MoCr4):
• 20 – Approx. 0.20% carbon content
• Mo – Molybdenum alloyed steel
• Cr – Chromium alloyed steel
• 4 – Alloy content classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.17 – 0.23
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.90 – 1.20
• Molybdenum (Mo): 0.20 – 0.35
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 900 – 1100 MPa
• Yield Strength: ≥ 650 MPa
• Elongation: ≥ 9%
• Hardness (Core): 240 – 300 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 20MoCr4 round bars in various diameters and finishes. With improved hardenability, strong core properties, and reliable performance after heat treatment, 20MoCr4 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Grade | EN 10084 16NiCr4 |
| Shape | Round |
| Diameter | 16 mm |
| Length | 3000 mm (3 m) |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 16NiCr4 is a low alloy nickel-chromium carburizing steel grade designed for components requiring a hard, wear-resistant surface combined with a tough and high-strength core after carburizing and heat treatment. With approximately 0.16% carbon along with nickel and chromium additions, this grade offers excellent hardenability, improved core toughness, and enhanced resistance to impact and fatigue.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 16NiCr4 steel is widely used in automotive, transmission, and general engineering industries. The nickel addition improves toughness and impact resistance, while chromium enhances wear resistance and depth of hardening, ensuring reliable mechanical performance after quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 16NiCr4 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (16NiCr4):
• 16 – Approx. 0.16% carbon content
• Ni – Nickel alloyed steel
• Cr – Chromium alloyed steel
• 4 – Alloy content classification
Chemical Composition (% – typical limits):
• Carbon (C): 0.14 – 0.19
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Nickel (Ni): 0.90 – 1.20
• Chromium (Cr): 0.60 – 0.90
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 750 – 950 MPa
• Yield Strength: ≥ 500 MPa
• Elongation: ≥ 10%
• Hardness (Core): 200 – 260 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 16NiCr4 round bars in various diameters and finishes. With enhanced toughness, hardenability, and reliable performance after heat treatment, 16NiCr4 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Grade | EN 10084 10NiCr5-4 |
| Diameter | 16 mm |
| Length | 3500 mm |
| Shape | Round |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 10NiCr5-4 is a low carbon nickel-chromium alloy carburizing steel grade designed for components requiring a very hard, wear-resistant surface with a tough and high-strength core after carburizing and heat treatment. With approximately 0.10% carbon along with significant nickel and chromium additions, this grade provides excellent hardenability, superior core toughness, and high fatigue strength, making it suitable for heavily loaded mechanical parts.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 10NiCr5-4 steel is widely used in automotive, heavy-duty transmission, and engineering industries. Nickel enhances core toughness and impact resistance, while chromium improves wear resistance and case hardening depth, ensuring reliable performance under dynamic loading conditions.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 10NiCr5-4 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (10NiCr5-4):
• 10 – Approx. 0.10% carbon content
• Ni – Nickel alloyed steel
• Cr – Chromium alloyed steel
• 5-4 – Alloy content classification (nickel and chromium levels)
Chemical Composition (% – typical limits):
• Carbon (C): 0.08 – 0.13
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Nickel (Ni): 1.00 – 1.40
• Chromium (Cr): 0.80 – 1.10
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 800 – 1000 MPa
• Yield Strength: ≥ 550 MPa
• Elongation: ≥ 10%
• Hardness (Core): 220 – 280 HB
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10084 10NiCr5-4 round bars in various diameters and finishes. With excellent hardenability, strong core toughness, and reliable performance after carburizing, 10NiCr5-4 steel is widely preferred for demanding automotive and engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Grade | EN 10084 18NiCr5-4 |
| Shape | Round |
| Diameter | 20 mm |
| Length | 3000 mm (3 m) |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 18NiCr5-4 is a nickel-chromium alloy carburizing steel grade developed for components requiring a hard, wear-resistant surface with a strong and tough core after carburizing and heat treatment. With approximately 0.18% carbon along with nickel and chromium additions, this grade offers excellent hardenability, improved fatigue strength, and superior impact resistance, making it suitable for highly stressed mechanical components.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 18NiCr5-4 steel is widely used in automotive, heavy engineering, and transmission industries. Nickel enhances core toughness and resistance to shock loading, while chromium improves wear resistance and depth of hardening, ensuring reliable mechanical performance after quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 18NiCr5-4 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (18NiCr5-4):
• 18 – Approx. 0.18% carbon content
• Ni – Nickel alloyed steel
• Cr – Chromium alloyed steel
• 5-4 – Alloy content classification (nickel and chromium levels)
Chemical Composition (% – typical limits):
• Carbon (C): 0.16 – 0.21
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Nickel (Ni): 1.00 – 1.40
• Chromium (Cr): 0.80 – 1.10
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 850 – 1050 MPa
• Yield Strength: ≥ 600 MPa
• Elongation: ≥ 9%
• Hardness (Core): 230 – 300 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 18NiCr5-4 round bars in various diameters and finishes. With reliable hardenability, excellent fatigue resistance, and strong core toughness, 18NiCr5-4 steel is widely used in demanding automotive and engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Grade | EN 10084 20NiCrMoS6-4 |
| Shape | Round |
| Diameter | 16 mm |
| Length | 3000 mm (3 m) |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 20NiCrMoS6-4 is a high-performance nickel-chromium-molybdenum alloy carburizing steel with controlled sulphur content, designed for components requiring a very hard, wear-resistant surface combined with a tough and high-strength core after carburizing and heat treatment.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20NiCrMoS6-4 steel is widely used in automotive, heavy-duty gearbox manufacturing, and critical engineering applications.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20NiCrMoS6-4 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (20NiCrMoS6-4):
• 20 – Approx. 0.20% carbon content
• Ni – Nickel alloyed steel
• Cr – Chromium alloyed steel
• Mo – Molybdenum alloyed steel
• S – Increased sulphur content for improved machinability
• 6-4 – Alloy content classification (nickel/chromium and molybdenum levels)
Chemical Composition (% – typical limits):
• Carbon (C): 0.17 – 0.23
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Nickel (Ni): 1.40 – 1.70
• Chromium (Cr): 1.50 – 1.80
• Molybdenum (Mo): 0.25 – 0.35
• Phosphorus (P): ≤ 0.025
• Sulphur (S): 0.020 – 0.040
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 1000 – 1200 MPa
• Yield Strength: ≥ 750 MPa
• Elongation: ≥ 8%
• Hardness (Core): 300 – 360 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 20NiCrMoS6-4 round bars in various diameters and finishes. With excellent hardenability, deep case hardening properties, improved machinability, and superior mechanical performance, 20NiCrMoS6-4 steel is widely preferred for demanding automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly
Product Details:
| Grade | EN 10084 15NiCr13 |
| Shape | Round |
| Diameter | 60 mm |
| Length | 3000 mm (3 m) |
| Test Certificate | Available |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | automotive parts, heavy-duty machinery parts, forgings, and general engineering components |
EN 10084 15NiCr13 is a nickel-chromium alloy carburizing steel grade developed for components requiring a hard, wear-resistant surface combined with a tough and high-strength core after carburizing and heat treatment. With approximately 0.15% carbon and higher nickel content, this grade offers excellent hardenability, superior core toughness, and high fatigue strength, making it suitable for heavily loaded and shock-resistant mechanical parts.
Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 15NiCr13 steel is widely used in automotive, gearbox manufacturing, and heavy engineering industries. Nickel significantly enhances toughness and resistance to impact, while chromium improves wear resistance and depth of hardening, ensuring reliable performance after quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 15NiCr13 round bars, supplied with mill test certificates and strict quality inspection as per European standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars
Explanation of Designation (15NiCr13):
• 15 – Approx. 0.15% carbon content
• Ni – Nickel alloyed steel
• Cr – Chromium alloyed steel
• 13 – Alloy content classification (higher nickel and chromium levels)
Chemical Composition (% – typical limits):
• Carbon (C): 0.12 – 0.18
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Nickel (Ni): 3.00 – 3.50
• Chromium (Cr): 0.80 – 1.10
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Core, typical normalized condition):
• Tensile Strength: 950 – 1150 MPa
• Yield Strength: ≥ 700 MPa
• Elongation: ≥ 8%
• Hardness (Core): 280 – 340 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10084 15NiCr13 round bars in various diameters and finishes. With superior hardenability, excellent fatigue resistance, and outstanding core toughness, 15NiCr13 steel is widely preferred for demanding automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly