Ladhani Metal Corporation
Girgaon, Mumbai, Maharashtra
GST No. 27AOZPB3027K1ZM
TrustSEAL Verified
Call 07942537951 93% Response Rate
SEND EMAIL
Product Details:
| Carbon Grade | Medium Carbon |
| Diameter | 32 mm |
| Length | 3000 mm |
| Grade | C35E |
| Usage | Construction, Fabrication, Machinery, Fasteners, Shafts |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Weldability | Moderate weldability depending on carbon content. |
EN 10083-2 C35E is a medium carbon non-alloy steel grade designed for applications requiring a good balance of strength, toughness, and machinability with improved quality control. With a nominal carbon content of around 0.35% and controlled phosphorus and sulphur levels (E quality), C35E steel offers more consistent mechanical properties and better reliability compared to standard C35 grades. Supplied in bar form, EN 10083-2 C35E steel is widely used in general engineering and mechanical manufacturing applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C35E steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C35E):
• C – Carbon steel
• 35 – Approx. 0.35% carbon content
• E – Special quality steel with controlled phosphorus and sulphur content
Chemical Composition (% – typical limits):
• Carbon (C): 0.32 – 0.39
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
Mechanical Properties (Typical, normalized / quenched & tempered):
• Tensile Strength: 570 – 700 MPa
• Yield Strength: ≥ 330 MPa
• Elongation: ≥ 16%
• Hardness: 170 – 210 HB (can be increased by heat treatment)
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C35E steel bars in various industrial bar forms with consistent quality and dependable performance. With controlled chemistry, good heat-treatability, and wide industrial usability, C35E steel bars are a dependable choice for engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Carbon Grade | Medium Carbon |
| Diameter | 20 mm |
| Length | 3000 mm |
| Grade | C45 |
| Usage | Machinery, Fabrication, Shafts, Construction, Fasteners |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Corrosion Resistance | Limited corrosion resistance; suitable for indoor or protected environments. |
EN 10083-2 C45 is a medium carbon non-alloy steel grade widely used for applications requiring high strength, good toughness, and excellent wear resistance after heat treatment. With a nominal carbon content of around 0.45%, C45 steel offers significantly higher strength and hardness than lower carbon grades, making it suitable for components subjected to high mechanical stress. Supplied in bar form, EN 10083-2 C45 steel is extensively used in mechanical engineering and industrial manufacturing. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C45 steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C45):
• C – Carbon steel
• 45 – Approx. 0.45% carbon content
Chemical Composition (% – typical limits):
• Carbon (C): 0.42 – 0.50
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, normalized / quenched & tempered):
• Tensile Strength: 620 – 800 MPa
• Yield Strength: ≥ 355 MPa
• Elongation: ≥ 14%
• Hardness: 190 – 230 HB (can be increased by heat treatment)
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C45 steel bars in various industrial bar forms with consistent quality and reliable performance. With excellent strength, heat-treatability, and wide industrial usability, C45 steel bar is a dependable choice for demanding mechanical and engineering applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Carbon Grade | Low Carbon |
| Diameter | 16 mm |
| Grade | C22R |
| Length | 3000 mm |
| Usage | Machinery, Shafts, Fasteners, Construction, Fabrication |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | Mechanical and automotive components, shafts, axles, gears, bolts, studs, machine parts, forgings |
EN 10083-2 C22R is a low carbon non-alloy steel grade intended for applications requiring good machinability, moderate strength, and reliable performance in the as-rolled (R) condition. With a nominal carbon content of around 0.22%, C22R steel offers good ductility and toughness, making it suitable for components subjected to light to moderate mechanical loads. Supplied in bar form, EN 10083-2 C22R steel is commonly used in general engineering and mechanical manufacturing. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C22R steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C22R):
• C – Carbon steel
• 22 – Approx. 0.22% carbon content
• R – Supplied in as-rolled condition
Chemical Composition (% – typical limits):
• Carbon (C): 0.17 – 0.24
• Manganese (Mn): 0.40 – 0.70
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, as-rolled):
• Tensile Strength: 410 – 550 MPa
• Yield Strength: ≥ 260 MPa
• Elongation: ≥ 20%
• Hardness: 120 – 170 HB
Key Features:
• Low carbon steel with good ductility and toughness
• Supplied in as-rolled condition for cost efficiency
• Good machinability and formability
• Suitable for welding and cold forming
• Economical material for general engineering components
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C22R steel bars in various industrial bar forms with consistent quality and dependable performance. With good machinability, weldability, and cost efficiency, C22R steel bars are a practical choice for general engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Carbon Grade | Low Carbon |
| Diameter | 32 mm |
| Length | 4000 mm |
| Grade | C22E |
| Usage | Construction, Fabrication, Fasteners, Shafts, Machinery |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | Mechanical and automotive components, shafts, axles, gears, bolts, studs, machine parts, forgings |
EN 10083-2 C22E is a low carbon non-alloy steel grade designed for applications requiring good toughness, moderate strength, and excellent machinability. With a nominal carbon content of around 0.22% and controlled sulphur and phosphorus levels (E quality), C22E steel offers improved ductility and reliability compared to higher carbon grades. Supplied in bar form, EN 10083-2 C22E steel is widely used for general engineering and mechanical manufacturing applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C22E steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C22E):
• C – Carbon steel
• 22 – Approx. 0.22% carbon content
• E – Special quality steel with controlled phosphorus and sulphur content
Chemical Composition (% – typical limits):
• Carbon (C): 0.17 – 0.24
• Manganese (Mn): 0.40 – 0.70
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
Mechanical Properties (Typical, normalized):
• Tensile Strength: 430 – 560 MPa
• Yield Strength: ≥ 275 MPa
• Elongation: ≥ 20%
• Hardness: 120 – 170 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C22E steel bars in various industrial bar forms with consistent quality and reliable performance. With good machinability, toughness, and versatility, C22E steel bars are a dependable choice for general engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Carbon Grade | Medium Carbon |
| Diameter | 16 mm |
| Length | 4000 mm |
| Grade | C 60 |
| Usage | Shafts, Fasteners, Construction, Fabrication, Machinery |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | Mechanical and automotive components, shafts, axles, gears, bolts, studs, machine parts, forgings |
EN 10083-2 C60 is a high carbon non-alloy steel grade intended for applications that require very high strength, hardness, and excellent wear resistance after heat treatment. With a nominal carbon content of around 0.60%, C60 steel offers superior mechanical performance compared to lower carbon grades and is suitable for components exposed to heavy loads and severe operating conditions. Supplied in bar form, EN 10083-2 C60 steel is widely used in demanding mechanical, automotive, and industrial applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C60 steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C60):
• C – Carbon steel
• 60 – Approx. 0.60% carbon content
Chemical Composition (% – typical limits):
• Carbon (C): 0.57 – 0.65
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, normalized / quenched & tempered):
• Tensile Strength: 750 – 900 MPa
• Yield Strength: ≥ 400 MPa
• Elongation: ≥ 9%
• Hardness: 220 – 270 HB (can be significantly increased by heat treatment)
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C60 steel bars in a wide range of industrial bar forms with consistent quality and reliable performance. With very high strength, excellent wear resistance, and superior heat-treatability, C60 steel bars are a dependable choice for demanding engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Product Shape | Round Bar |
| Diameter | 40mm |
| Length | 3 m |
| Grade | EN 55 |
| Standard | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | engineering components general-purpose mechanical fabrication requiring good strength and toughness |
EN 10083-2 C55 is a high carbon non-alloy steel grade developed for applications that demand high strength, hardness, and excellent wear resistance after heat treatment. With a nominal carbon content of around 0.55%, C55 steel offers superior mechanical performance compared to lower carbon grades and is suitable for components subjected to heavy loads and severe wear conditions. Supplied in bar form, EN 10083-2 C55 steel is commonly used in demanding mechanical and industrial applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C55 steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C55):
• C – Carbon steel
• 55 – Approx. 0.55% carbon content
Chemical Composition (% – typical limits):
• Carbon (C): 0.52 – 0.60
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, normalized / quenched & tempered):
• Tensile Strength: 700 – 850 MPa
• Yield Strength: ≥ 380 MPa
• Elongation: ≥ 10%
• Hardness: 200 – 250 HB (can be significantly increased by heat treatment)
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C55 steel bars in a wide range of industrial bar forms with consistent quality and dependable performance. With high strength, excellent wear resistance, and superior heat-treatability, C55 steel bars are a reliable choice for demanding engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | C40 |
| Product Shape | Hexagonal Bar |
| Diameter | 16mm |
| Length | 6 m |
| Standard | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | Mechanical and automotive components, shafts, axles, gears, bolts, studs, machine parts, forgings |
EN 10083-2 C40 is a medium carbon non-alloy steel grade designed for applications that require higher strength, hardness, and wear resistance compared to lower carbon grades. With a nominal carbon content of around 0.40%, C40 steel provides enhanced mechanical properties after heat treatment and is suitable for components subjected to moderate to high mechanical stress. Supplied in bar form, EN 10083-2 C40 steel is widely used in mechanical engineering and industrial manufacturing applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C40 steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C40):
• C – Carbon steel
• 40 – Approx. 0.40% carbon content
Chemical Composition (% – typical limits):
• Carbon (C): 0.37 – 0.44
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, normalized / quenched & tempered):
• Tensile Strength: 600 – 750 MPa
• Yield Strength: ≥ 350 MPa
• Elongation: ≥ 14%
• Hardness: 180 – 220 HB (can be increased by heat treatment)
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C40 steel bars in various industrial bar forms with consistent quality and reliable performance. With higher strength, excellent heat-treatability, and wide industrial usability, C40 steel bar is a dependable choice for demanding mechanical and engineering applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | C35 |
| Product Shape | Round Bar |
| Diameter | 12mm |
| Length | 3 m |
| Standard | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | Mechanical and automotive components, shafts, axles, gears, bolts, studs, machine parts, forgings |
EN 10083-2 C35 is a medium carbon non-alloy steel grade designed for applications requiring a good balance of strength, toughness, and wear resistance after heat treatment. With a nominal carbon content of around 0.35%, C35 steel offers improved mechanical properties compared to low-carbon steels and is suitable for components subjected to moderate mechanical stress. Supplied in bar form, EN 10083-2 C35 steel is widely used in general engineering and mechanical manufacturing applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C35 steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C35):
• C – Carbon steel
• 35 – Approx. 0.35% carbon content
Chemical Composition (% – typical limits):
• Carbon (C): 0.32 – 0.39
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, normalized / quenched & tempered):
• Tensile Strength: 570 – 700 MPa
• Yield Strength: ≥ 330 MPa
• Elongation: ≥ 16%
• Hardness: 170 – 210 HB (can be increased by heat treatment)
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C35 steel bars in various industrial bar forms with consistent quality and reliable performance. With good strength, heat-treatability, and wide industrial usability, C35 steel bar is a dependable choice for engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | C45R |
| Product Shape | Hexagonal Bar |
| Diameter | 16mm |
| Length | 3 m |
| Standard | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | Mechanical and automotive components, shafts, axles, gears, bolts, studs, machine parts, forgings |
EN 10083-2 C45R is a medium carbon non-alloy steel grade supplied in the as-rolled (R) condition, suitable for applications requiring high strength, good toughness, and economical processing without additional heat treatment. With a nominal carbon content of around 0.45%, C45R steel provides higher strength and hardness than C35 and C40 grades, making it suitable for components subjected to moderate to high mechanical stress. Supplied in bar form, EN 10083-2 C45R steel is widely used in general engineering and mechanical manufacturing applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C45R steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C45R):
• C – Carbon steel
• 45 – Approx. 0.45% carbon content
• R – Supplied in as-rolled condition
Chemical Composition (% – typical limits):
• Carbon (C): 0.42 – 0.50
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, as-rolled):
• Tensile Strength: 600 – 750 MPa
• Yield Strength: ≥ 340 MPa
• Elongation: ≥ 14%
• Hardness: 180 – 220 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C45R steel bars in a wide range of industrial bar forms with consistent quality and dependable performance. With high strength, ease of processing, and economical pricing, C45R steel bars are a reliable choice for general engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Carbon Grade | Medium Carbon |
| Diameter | 25 mm |
| Grade | C45E |
| Length | 5000 mm |
| Usage | Fasteners, Machinery, Fabrication, Construction, Shafts |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | engineering components general-purpose mechanical fabrication requiring good strength and toughness |
EN 10083-2 C45E is a medium carbon non-alloy steel grade designed for applications requiring high strength, good toughness, and reliable performance with enhanced chemical quality. With a nominal carbon content of around 0.45% and controlled phosphorus and sulphur levels (E quality), C45E steel provides more consistent mechanical properties and improved reliability compared to standard C45 grades. Supplied in bar form, EN 10083-2 C45E steel is widely used in demanding mechanical and engineering applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C45E steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C45E):
• C – Carbon steel
• 45 – Approx. 0.45% carbon content
• E – Special quality steel with controlled phosphorus and sulphur content
Chemical Composition (% – typical limits):
• Carbon (C): 0.42 – 0.50
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
Mechanical Properties (Typical, normalized / quenched & tempered):
• Tensile Strength: 620 – 800 MPa
• Yield Strength: ≥ 355 MPa
• Elongation: ≥ 14%
• Hardness: 190 – 230 HB (can be increased by heat treatment)
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C45E steel bars in various industrial bar forms with consistent quality and dependable performance. With controlled chemistry, excellent heat-treatability, and wide industrial usability, C45E steel bars are a reliable choice for demanding engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Carbon Grade | Medium Carbon |
| Diameter | 20 mm |
| Grade | C40R |
| Length | 4000 mm |
| Usage | Construction, Shafts, Fasteners, Fabrication, Machinery |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | engineering components general-purpose mechanical fabrication requiring good strength and toughness |
EN 10083-2 C40R is a medium carbon non-alloy steel grade supplied in the as-rolled (R) condition, suitable for applications requiring good strength, toughness, and economical processing without additional heat treatment. With a nominal carbon content of around 0.40%, C40R steel provides higher strength and hardness than C35 grades, making it appropriate for components subjected to moderate to high mechanical loads. Supplied in bar form, EN 10083-2 C40R steel is widely used in general engineering and mechanical manufacturing applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C40R steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C40R):
• C – Carbon steel
• 40 – Approx. 0.40% carbon content
• R – Supplied in as-rolled condition
Chemical Composition (% – typical limits):
• Carbon (C): 0.37 – 0.44
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, as-rolled):
• Tensile Strength: 560 – 720 MPa
• Yield Strength: ≥ 330 MPa
• Elongation: ≥ 14%
• Hardness: 170 – 210 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C40R steel bars in a wide range of industrial bar forms with consistent quality and reliable performance. With good strength, ease of processing, and economical pricing, C40R steel bars are a dependable choice for general engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | C40E |
| Product Shape | Hexagonal Bar |
| Diameter | 32mm |
| Length | 6 m |
| Standard | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | engineering components general-purpose mechanical fabrication requiring good strength and toughness |
EN 10083-2 C40E is a medium carbon non-alloy steel grade designed for applications requiring higher strength, good toughness, and reliable performance with improved chemical quality. With a nominal carbon content of around 0.40% and controlled phosphorus and sulphur levels (E quality), C40E steel offers more consistent mechanical properties and better reliability than standard C40 grades. Supplied in bar form, EN 10083-2 C40E steel is widely used in mechanical engineering and industrial manufacturing applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C40E steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C40E):
• C – Carbon steel
• 40 – Approx. 0.40% carbon content
• E – Special quality steel with controlled phosphorus and sulphur content
Chemical Composition (% – typical limits):
• Carbon (C): 0.37 – 0.44
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
Mechanical Properties (Typical, normalized / quenched & tempered):
• Tensile Strength: 600 – 750 MPa
• Yield Strength: ≥ 350 MPa
• Elongation: ≥ 14%
• Hardness: 180 – 220 HB (can be increased by heat treatment)
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C40E steel bars in various industrial bar forms with consistent quality and dependable performance. With controlled chemistry, excellent heat-treatability, and wide industrial usability, C40E steel bars are a reliable choice for engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Carbon Grade | High Carbon |
| Diameter | 25 mm |
| Length | 4000 mm |
| Grade | C50E |
| Usage | Machinery, Construction, Shafts, Fabrication, Fasteners |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Weldability | Moderate weldability depending on carbon content. |
EN 10083-2 C50E is a high carbon non-alloy steel grade designed for applications requiring higher strength, hardness, and wear resistance with improved chemical quality. With a nominal carbon content of around 0.50% and controlled phosphorus and sulphur levels (E quality), C50E steel delivers consistent mechanical properties and reliable performance in demanding service conditions. Supplied in bar form, EN 10083-2 C50E steel is commonly used for heavily loaded and wear-resistant mechanical components. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C50E steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C50E):
• C – Carbon steel
• 50 – Approx. 0.50% carbon content
• E – Special quality steel with controlled phosphorus and sulphur content
Chemical Composition (% – typical limits):
• Carbon (C): 0.47 – 0.55
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
Mechanical Properties (Typical, normalized / quenched & tempered):
• Tensile Strength: 700 – 850 MPa
• Yield Strength: ≥ 400 MPa
• Elongation: ≥ 12%
• Hardness: 200 – 240 HB (can be significantly increased by heat treatment)
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C50E steel bars in various industrial bar forms with consistent quality and reliable performance. With high strength, excellent heat-treatability, and improved chemical purity, C50E steel bars are a dependable choice for demanding mechanical and engineering applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Carbon Grade | High Carbon |
| Diameter | 16 mm |
| Grade | C55E |
| Length | 3000 mm |
| Usage | Machinery, Fasteners, Construction, Shafts, Fabrication |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | Mechanical and automotive components, shafts, axles, gears, bolts, studs, machine parts, forgings |
EN 10083-2 C55E is a high carbon non-alloy steel grade designed for applications requiring very high strength, hardness, and excellent wear resistance with improved chemical quality. With a nominal carbon content of around 0.55% and controlled phosphorus and sulphur levels (E quality), C55E steel delivers consistent mechanical properties and reliable performance in heavily loaded and wear-prone components. Supplied in bar form, EN 10083-2 C55E steel is commonly used in demanding mechanical, automotive, and industrial applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C55E steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C55E):
• C – Carbon steel
• 55 – Approx. 0.55% carbon content
• E – Special quality steel with controlled phosphorus and sulphur content
Chemical Composition (% – typical limits):
• Carbon (C): 0.52 – 0.60
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
Mechanical Properties (Typical, normalized / quenched & tempered):
• Tensile Strength: 750 – 900 MPa
• Yield Strength: ≥ 380 MPa
• Elongation: ≥ 10%
• Hardness: 200 – 250 HB (can be significantly increased by heat treatment)
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C55E steel bars in various industrial bar forms with consistent quality and reliable performance. With very high strength, excellent wear resistance, and superior heat-treatability, C55E steel bars are a dependable choice for demanding mechanical and engineering applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Carbon Grade | High Carbon |
| Diameter | 25 mm |
| Grade | C55R |
| Length | 4000 mm |
| Delivery Condition | As Rolled |
| Usage | Machinery, Fasteners, Shafts, Construction, Fabrication |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10083-2 C55R is a high carbon non-alloy steel grade supplied in the as-rolled (R) condition, suitable for applications requiring high strength, good wear resistance, and economical processing without additional heat treatment. With a nominal carbon content of around 0.55%, C55R steel offers higher hardness and tensile strength compared to lower carbon grades, making it suitable for components subjected to heavy mechanical loads and abrasive conditions. Supplied in bar form, EN 10083-2 C55R steel is widely used in general engineering, automotive, and industrial applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C55R steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C55R):
• C – Carbon steel
• 55 – Approx. 0.55% carbon content
• R – Supplied in as-rolled condition
Chemical Composition (% – typical limits):
• Carbon (C): 0.52 – 0.60
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, as-rolled):
• Tensile Strength: 700 – 850 MPa
• Yield Strength: ≥ 380 MPa
• Elongation: ≥ 10%
• Hardness: 200 – 250 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C55R steel bars in a wide range of industrial bar forms with consistent quality and dependable performance. With very high strength, good wear resistance, and economical processing, C55R steel bars are a reliable choice for demanding engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Carbon Grade | High Carbon |
| Diameter | 16 mm |
| Grade | C60R |
| Length | 3000 mm |
| Usage | Construction, Fasteners, Machinery, Fabrication, Shafts |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | Mechanical and automotive components, shafts, axles, gears, bolts, studs, machine parts, forgings |
EN 10083-2 C60R is a very high carbon non-alloy steel grade supplied in the as-rolled (R) condition, suitable for applications requiring high strength, good hardness, and wear resistance with cost-effective processing without additional heat treatment. With a nominal carbon content of around 0.60%, C60R steel provides higher hardness and tensile strength than lower carbon grades, making it suitable for components subjected to heavy mechanical loads and abrasive conditions. Supplied in bar form, EN 10083-2 C60R steel is widely used in general engineering, automotive, and industrial manufacturing. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C60R steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C60R):
• C – Carbon steel
• 60 – Approx. 0.60% carbon content
• R – Supplied in as-rolled condition
Chemical Composition (% – typical limits):
• Carbon (C): 0.57 – 0.65
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, as-rolled):
• Tensile Strength: 750 – 900 MPa
• Yield Strength: ≥ 400 MPa
• Elongation: ≥ 8%
• Hardness: 220 – 270 HB
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C60R steel bars in a wide range of industrial bar forms with consistent quality and dependable performance. With very high strength, good wear resistance, and economical processing, C60R steel bars are a reliable choice for demanding mechanical and engineering applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Carbon Grade | High Carbon |
| Diameter | 20 mm |
| Length | 3000 mm |
| Grade | C60E |
| Usage | Machinery, Fasteners, Shafts, Fabrication, Construction |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Applications | Mechanical and automotive components, shafts, axles, gears, bolts, studs, machine parts, forgings |
EN 10083-2 C60E is a high carbon non-alloy steel grade designed for applications requiring very high strength, hardness, and excellent wear resistance with enhanced chemical quality. With a nominal carbon content of around 0.60% and controlled phosphorus and sulphur levels (E quality), C60E steel delivers consistent mechanical properties and reliable performance in heavily loaded and abrasive service conditions. Supplied in bar form, EN 10083-2 C60E steel is commonly used in demanding mechanical, automotive, and industrial applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C60E steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements.
Forms of Supply (as per grade):
Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar
Explanation of Designation (C60E):
• C – Carbon steel
• 60 – Approx. 0.60% carbon content
• E – Special quality steel with controlled phosphorus and sulphur content
Chemical Composition (% – typical limits):
• Carbon (C): 0.57 – 0.65
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
Mechanical Properties (Typical, normalized / quenched & tempered):
• Tensile Strength: 800 – 950 MPa
• Yield Strength: ≥ 420 MPa
• Elongation: ≥ 8%
• Hardness: 220 – 270 HB (can be significantly increased by heat treatment)
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-2 C60E steel bars in various industrial bar forms with consistent quality and reliable performance. With very high strength, excellent wear resistance, and superior heat-treatability, C60E steel bars are a dependable choice for the most demanding mechanical and engineering applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | 20MnB5 |
| Diameter | 16 mm |
| Shape | Round Bar |
| Length | 3 Meter |
| Standard | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10083-3 20MnB5 is a boron-alloyed steel grade designed for applications requiring high strength, excellent hardenability, and good toughness after heat treatment. With a nominal carbon content of around 0.20% and the addition of boron, manganese, and chromium, 20MnB5 steel achieves significantly improved hardenability compared to conventional carbon steels. Supplied in bar and plate form, EN 10083-3 20MnB5 alloy steel is widely used in automotive, forging, and mechanical engineering applications. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for quenched and tempered alloy steels.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 20MnB5 alloy steel bars and plates.
Forms of Supply (as per grade):
Hot rolled round bar, black round bar, forged bar, peeled bar, bright round bar, square bar, flat bar, hot rolled plates, quenched and tempered plates
Explanation of Designation (20MnB5):
• 20 – Approx. 0.20% carbon content
• Mn – Manganese alloying element for strength and hardenability
• B – Boron addition for enhanced hardenability
• 5 – Indicates alloying content range as per EN standard
Chemical Composition (% – typical limits):
• Carbon (C): 0.17 – 0.23
• Manganese (Mn): 1.10 – 1.40
• Silicon (Si): ≤ 0.40
• Boron (B): 0.0008 – 0.0050
• Chromium (Cr): ≤ 0.40
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, quenched & tempered):
• Tensile Strength: 800 – 1000 MPa
• Yield Strength: ≥ 600 MPa
• Elongation: ≥ 12%
• Hardness: 230 – 300 HB (after heat treatment)
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-3 20MnB5 alloy steel bars and plates in relevant industrial forms with consistent quality and reliable performance. With excellent hardenability, high strength after heat treatment, and proven performance in automotive and forging applications, 20MnB5 alloy steel is a dependable choice for demanding engineering requirements. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | 30NiCrMo16-6 |
| Thickness | 10 mm |
| Material Type | Chrome Moly Steel |
| Size (W x L) | 1250 x 2500 mm |
| Standard | EN |
| Application | Automobile, Pressure Vessel, Shipbuilding, Engineering |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10083-3 30NiCrMo16-6 is a high-strength nickel-chromium-molybdenum alloy steel grade developed for applications requiring exceptional toughness, very high hardenability, and superior fatigue resistance after quenching and tempering. With a nominal carbon content of approximately 0.30% and higher nickel content compared to standard Cr-Ni-Mo grades, this steel offers outstanding impact strength and uniform mechanical properties even in heavy sections.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 30NiCrMo16-6 alloy steel plates and bars, supplied with certified mill test certificates and strict quality control.
Forms of Supply (as per grade):
Hot rolled plates, normalized plates, quenched and tempered plates, flame cut plates, cut-to-size plates, hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars
Explanation of Designation (30NiCrMo16-6):
• 30 – Approx. 0.30% carbon content
• Ni – Nickel for superior toughness and impact resistance
• Cr – Chromium for strength and hardenability
• Mo – Molybdenum for improved fatigue resistance and tempering stability
• 16-6 – Indicates alloying content range as per EN standard (higher nickel content category)
Chemical Composition (% – typical limits):
• Carbon (C): 0.26 – 0.34
• Manganese (Mn): 0.40 – 0.70
• Silicon (Si): ≤ 0.40
• Nickel (Ni): 3.50 – 4.00
• Chromium (Cr): 1.30 – 1.70
• Molybdenum (Mo): 0.30 – 0.50
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, quenched & tempered condition):
• Tensile Strength: 1000 – 1200 MPa (depending on section size and heat treatment)
• Yield Strength: ≥ 850 MPa
• Elongation: ≥ 11%
• Hardness: 300 – 360 HB
• Excellent impact strength even at low temperatures
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10083-3 30NiCrMo16-6 alloy steel plates and bars in various sizes, finishes, and heat-treated conditions. With its exceptional toughness, high strength, and superior hardenability, this grade is a reliable choice for demanding industrial and engineering applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | 34CrNiMo6 |
| Diameter | 16 mm |
| Shape | Hexagonal Bar |
| Length | 3 Meter |
| Standard | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10083-3 34CrNiMo6 is a high-strength chromium-nickel-molybdenum alloy steel grade designed for components subjected to heavy dynamic loads and high stress conditions. With a nominal carbon content of approximately 0.34% and alloying additions of chromium, nickel, and molybdenum, this grade offers excellent hardenability, superior toughness, and outstanding fatigue resistance after quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 34CrNiMo6 alloy steel bars, supplied with certified chemical composition and controlled mechanical properties to meet international standards.
Forms of Supply (as per grade):
Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars
Explanation of Designation (34CrNiMo6):
• 34 – Approx. 0.34% carbon content
• Cr – Chromium for strength, wear resistance, and hardenability
• Ni – Nickel for improved toughness and impact strength
• Mo – Molybdenum for enhanced hardenability, fatigue strength, and resistance to tempering softening
• 6 – Indicates alloying content range as per EN standard
Chemical Composition (% – typical limits):
• Carbon (C): 0.30 – 0.38
• Manganese (Mn): 0.50 – 0.80
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 1.30 – 1.70
• Nickel (Ni): 1.30 – 1.70
• Molybdenum (Mo): 0.15 – 0.30
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, quenched & tempered condition):
• Tensile Strength: 900 – 1100 MPa (can reach higher depending on section size and heat treatment)
• Yield Strength: ≥ 750 MPa
• Elongation: ≥ 12%
• Impact Strength: Excellent toughness even at low temperatures
• Hardness: 280 – 320 HB (after heat treatment)
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10083-3 34CrNiMo6 alloy steel bars in various sizes and finishes to meet demanding engineering requirements. With its excellent strength, toughness, and fatigue resistance, 34CrNiMo6 is an ideal choice for critical mechanical and structural applications. For size availability, technical data, or customized supply requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | 36NiCrMo16 |
| Diameter | 20 mm |
| Shape | Round Bar |
| Length | 4 Meter |
| Standard | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10083-3 36NiCrMo16 is a high-strength nickel-chromium-molybdenum alloy steel grade developed for components subjected to extreme mechanical stress, heavy impact loads, and fatigue conditions. With a nominal carbon content of approximately 0.36% and elevated nickel content, this grade offers excellent hardenability, very high tensile strength, and outstanding toughness after quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 36NiCrMo16 alloy steel bars, supplied with certified mill test certificates and strict quality assurance.
Forms of Supply (as per grade):
Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars
Explanation of Designation (36NiCrMo16):
• 36 – Approx. 0.36% carbon content
• Ni – Nickel for superior toughness and impact resistance
• Cr – Chromium for increased strength and hardenability
• Mo – Molybdenum for enhanced fatigue strength and resistance to tempering softening
• 16 – Indicates alloying content range as per EN standard (high nickel category)
Chemical Composition (% – typical limits):
• Carbon (C): 0.33 – 0.39
• Manganese (Mn): 0.40 – 0.70
• Silicon (Si): ≤ 0.40
• Nickel (Ni): 3.50 – 4.00
• Chromium (Cr): 1.30 – 1.70
• Molybdenum (Mo): 0.30 – 0.50
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, quenched & tempered condition):
• Tensile Strength: 1000 – 1200 MPa (can vary depending on section size and heat treatment)
• Yield Strength: ≥ 850 MPa
• Elongation: ≥ 10%
• Hardness: 300 – 360 HB
• Excellent impact strength, including at low temperatures
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10083-3 36NiCrMo16 alloy steel bars in various sizes and finishes to meet demanding engineering requirements. With its very high strength, excellent toughness, and superior fatigue resistance, 36NiCrMo16 is an ideal choice for critical mechanical applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | 38Cr2 |
| Thickness | 20 mm |
| Material Type | chromium steel |
| Size (W x L) | 1250 x 5000 mm |
| Standard | EN |
| Application | Boiler, Engineering, Shipbuilding, Automobile |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10083-3 38Cr2 is a chromium alloy steel grade designed for applications requiring high strength, good wear resistance, and excellent hardenability after heat treatment. With a nominal carbon content of approximately 0.38% and chromium as the primary alloying element, 38Cr2 steel offers improved strength and abrasion resistance compared to plain carbon steels.
38Cr2 alloy steel plates are commonly used in engineering components subjected to mechanical stress, impact loading, and surface wear. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 38Cr2 alloy steel plates, supplied with certified chemical composition and controlled mechanical properties as per international standards.
Forms of Supply (as per grade):
Hot rolled plates, normalized plates, annealed plates, quenched and tempered plates, flame cut plates, cut-to-size plates
Explanation of Designation (38Cr2):
• 38 – Approx. 0.38% carbon content
• Cr – Chromium for enhanced strength, wear resistance, and hardenability
• 2 – Indicates chromium content range as per EN standard
Chemical Composition (% – typical limits):
• Carbon (C): 0.35 – 0.42
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.40 – 0.70
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, quenched & tempered condition):
• Tensile Strength: 800 – 1000 MPa
• Yield Strength: ≥ 600 MPa
• Elongation: ≥ 12%
• Hardness: 240 – 300 HB (depending on heat treatment)
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-3 38Cr2 alloy steel plates in various thicknesses and heat-treated conditions. With good strength, improved wear resistance, and reliable hardenability, 38Cr2 steel is suitable for a wide range of engineering and industrial applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | 46Cr2 |
| Diameter | 16 mm |
| Shape | Hexagonal Bar |
| Length | 3 Meter |
| Standard | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10083-3 46Cr2 is a chromium alloy steel grade developed for applications requiring high strength, improved wear resistance, and good hardenability after heat treatment. With a nominal carbon content of approximately 0.46%, this grade provides higher strength and hardness compared to lower carbon chromium steels. The addition of chromium enhances hardenability, surface hardness, and resistance to abrasion.
46Cr2 alloy steel bars are widely used in components subjected to high mechanical loads, torsion, and wear conditions. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 46Cr2 alloy steel bars, supplied with certified mill test certificates and strict quality control.
Forms of Supply (as per grade):
Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars
Explanation of Designation (46Cr2):
• 46 – Approx. 0.46% carbon content
• Cr – Chromium for improved strength, wear resistance, and hardenability
• 2 – Indicates chromium content range as per EN standard
Chemical Composition (% – typical limits):
• Carbon (C): 0.43 – 0.50
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.40 – 0.70
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, quenched & tempered condition):
• Tensile Strength: 850 – 1050 MPa
• Yield Strength: ≥ 650 MPa
• Elongation: ≥ 10%
• Hardness: 250 – 320 HB (depending on heat treatment)
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10083-3 46Cr2 alloy steel bars in various sizes and finishes to meet industrial and engineering requirements. With high strength, good wear resistance, and reliable heat treatment response, 46Cr2 steel bars are suitable for demanding mechanical applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | 34Cr4 |
| Thickness | 10 mm |
| Material Type | chromium alloy |
| Size (W x L) | 1250 x 2500 mm |
| Standard | EN |
| Application | Engineering, Boiler, Shipbuilding, Automobile |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10083-3 34Cr4 is a chromium alloy steel grade developed for applications requiring good strength, improved hardenability, and enhanced wear resistance after heat treatment. With a nominal carbon content of approximately 0.34% and chromium as the principal alloying element, 34Cr4 steel offers a reliable balance of toughness and mechanical strength.
34Cr4 alloy steel plates are widely used in structural and mechanical components subjected to moderate to high stress conditions. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 34Cr4 alloy steel plates, supplied with certified chemical composition and controlled mechanical properties as per EN standards.
Forms of Supply (as per grade):
Hot rolled plates, normalized plates, annealed plates, quenched and tempered plates, flame cut plates, cut-to-size plates
Explanation of Designation (34Cr4):
• 34 – Approx. 0.34% carbon content
• Cr – Chromium for improved strength, wear resistance, and hardenability
• 4 – Indicates chromium content range as per EN standard
Chemical Composition (% – typical limits):
• Carbon (C): 0.30 – 0.37
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.90 – 1.20
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, quenched & tempered condition):
• Tensile Strength: 800 – 1000 MPa
• Yield Strength: ≥ 600 MPa
• Elongation: ≥ 12%
• Hardness: 230 – 300 HB (depending on heat treatment)
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10083-3 34Cr4 alloy steel plates in various thicknesses and heat-treated conditions. With good strength, enhanced hardenability, and reliable performance, 34Cr4 steel plates are suitable for a wide range of engineering and industrial applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | 37CrS4 |
| Diameter | 40 mm |
| Shape | Round Bar |
| Length | 4 Meter |
| Standard | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10083-3 37CrS4 is a resulphurized chromium alloy steel grade designed for applications requiring good strength, improved hardenability, and enhanced machinability. The addition of sulphur (S) improves cutting performance, making this grade particularly suitable for high-speed machining and large-scale production of precision components.
With a nominal carbon content of approximately 0.37% and chromium as the primary alloying element, 37CrS4 steel provides a reliable balance of strength, wear resistance, and machinability after quenching and tempering. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 37CrS4 alloy steel bars, supplied with certified mill test certificates and strict quality control.
Forms of Supply (as per grade):
Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars
Explanation of Designation (37CrS4):
• 37 – Approx. 0.37% carbon content
• Cr – Chromium for improved strength and hardenability
• S – Resulphurized for enhanced machinability
• 4 – Indicates chromium content range as per EN standard
Chemical Composition (% – typical limits):
• Carbon (C): 0.34 – 0.41
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.90 – 1.20
• Sulphur (S): 0.020 – 0.040
• Phosphorus (P): ≤ 0.025
Mechanical Properties (Typical, quenched & tempered condition):
• Tensile Strength: 850 – 1050 MPa
• Yield Strength: ≥ 650 MPa
• Elongation: ≥ 9 – 11%
• Hardness: 250 – 320 HB (depending on heat treatment)
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10083-3 37CrS4 alloy steel bars in various sizes and finishes to meet industrial and machining requirements. With enhanced machinability and reliable mechanical properties, 37CrS4 steel bars are ideal for precision and high-volume engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | 34CrS4 |
| Diameter | 20 mm |
| Shape | Hexagonal Bar |
| Length | 3 Meter |
| Standard | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10083-3 34CrS4 is a resulphurized chromium alloy steel grade developed for applications requiring good strength, improved machinability, and reliable hardenability after heat treatment. The addition of sulphur (S) enhances machinability, making this grade particularly suitable for high-speed machining and mass production of components.
With a nominal carbon content of approximately 0.34% and chromium as the primary alloying element, 34CrS4 steel provides a good balance of strength, toughness, and wear resistance after quenching and tempering. This material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 34CrS4 alloy steel bars, supplied with certified mill test certificates and strict quality control.
Forms of Supply (as per grade):
Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars
Explanation of Designation (34CrS4):
• 34 – Approx. 0.34% carbon content
• Cr – Chromium for improved strength and hardenability
• S – Resulphurized for enhanced machinability
• 4 – Indicates chromium content range as per EN standard
Chemical Composition (% – typical limits):
• Carbon (C): 0.30 – 0.37
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.90 – 1.20
• Sulphur (S): 0.020 – 0.040 (improved machinability range)
• Phosphorus (P): ≤ 0.025
Mechanical Properties (Typical, quenched & tempered condition):
• Tensile Strength: 800 – 1000 MPa
• Yield Strength: ≥ 600 MPa
• Elongation: ≥ 10%
• Hardness: 230 – 300 HB (depending on heat treatment)
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10083-3 34CrS4 alloy steel bars in various sizes and finishes to meet industrial machining requirements. With enhanced machinability and reliable mechanical properties, 34CrS4 steel bars are an excellent choice for high-speed machining and engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | 27MnCrB5-2 |
| Diameter | 40 mm |
| Shape | Hexagonal Bar |
| Length | 4 Meter |
| Standard | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10083-3 27MnCrB5-2 is a boron-alloyed manganese-chromium steel grade developed for applications requiring high hardenability, good strength, and excellent performance after quenching and tempering. The addition of boron (B), even in very small quantities, significantly enhances hardenability, allowing uniform mechanical properties in medium to large cross-section bars. With a nominal carbon content of approximately 0.27%, along with manganese and chromium as primary alloying elements, 27MnCrB5-2 steel provides a good balance of strength, toughness, and wear resistance.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 27MnCrB5-2 alloy steel bars, supplied with certified mill test certificates and strict quality assurance.
Forms of Supply (as per grade):
Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars
Explanation of Designation (27MnCrB5-2):
• 27 – Approx. 0.27% carbon content
• Mn – Manganese for strength and improved hardenability
• Cr – Chromium for wear resistance and deeper hardening
• B – Boron for significantly enhanced hardenability
• 5-2 – Indicates alloying content range as per EN standard
Chemical Composition (% – typical limits):
• Carbon (C): 0.24 – 0.30
• Manganese (Mn): 1.10 – 1.40
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.30 – 0.60
• Boron (B): 0.0008 – 0.0050
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, quenched & tempered condition):
• Tensile Strength: 850 – 1050 MPa
• Yield Strength: ≥ 650 MPa
• Elongation: ≥ 12%
• Hardness: 250 – 320 HB (depending on heat treatment and section size)
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10083-3 27MnCrB5-2 alloy steel bars in various sizes and finishes to meet demanding industrial requirements. With enhanced hardenability, good strength, and reliable performance after heat treatment, 27MnCrB5-2 steel bars are ideal for automotive and engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | 42CrMo4 |
| Diameter | 20 mm |
| Shape | Round Bar |
| Length | 3 Meter |
| Standard | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10083-3 42CrMo4 is a high-strength chromium-molybdenum alloy steel grade widely used for components requiring excellent tensile strength, superior toughness, and outstanding hardenability after quenching and tempering. Manufactured in accordance with EN 10083-3, 42CrMo4 steel provides deep hardening capability and consistent mechanical properties across larger cross-sections. The combination of chromium and molybdenum enhances wear resistance, fatigue strength, and resistance to tempering softening.
Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of EN 10083-3 42CrMo4 alloy steel bars, supplied with mill test certificates and strict quality assurance as per international standards.
Forms of Supply (as per grade):
Hot rolled round bars, Black round bars, Forged bars, Bright bars, Peeled bars, Turned bars, Ground bars, Square bars, Flat bars, Hex bars
Explanation of Designation (42CrMo4):
• 42 – Approx. 0.42% carbon content
• Cr – Chromium for improved hardenability and wear resistance
• Mo – Molybdenum for enhanced strength and resistance to tempering softening
• 4 – Indicates alloying content range as per EN standard
Chemical Composition (% – typical limits):
• Carbon (C): 0.38 – 0.45
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.90 – 1.20
• Molybdenum (Mo): 0.15 – 0.30
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, quenched & tempered condition):
• Tensile Strength: 1000 – 1200 MPa
• Yield Strength: ≥ 850 MPa
• Elongation: ≥ 10%
• Hardness: 280 – 340 HB (depending on section size and heat treatment)
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10083-3 42CrMo4 alloy steel bars in a wide range of diameters and finishes. Known for superior strength, hardenability, and fatigue resistance, 42CrMo4 steel bars are ideal for demanding automotive, mechanical, and heavy engineering applications. For stock details, custom sizes, or technical specifications, contact Ladhani Metal Corporation.
#EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | 41Cr4 |
| Diameter | 32 mm |
| Shape | Round Bar |
| Length | 5 Meter |
| Standard | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10083-3 41Cr4 is a chromium alloy steel grade designed for applications requiring high strength, good toughness, and improved hardenability after heat treatment. With a nominal carbon content of approximately 0.41% and chromium as the primary alloying element, 41Cr4 steel delivers enhanced mechanical performance and wear resistance compared to lower carbon alloy steels.
41Cr4 alloy steel bars are widely used in components subjected to high torsional stress, bending loads, and dynamic forces. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 41Cr4 alloy steel bars, supplied with certified mill test certificates and strict quality assurance to meet industrial standards.
Forms of Supply (as per grade):
Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars
Explanation of Designation (41Cr4):
• 41 – Approx. 0.41% carbon content
• Cr – Chromium for improved strength, hardenability, and wear resistance
• 4 – Indicates chromium content range as per EN standard
Chemical Composition (% – typical limits):
• Carbon (C): 0.38 – 0.45
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.90 – 1.20
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, quenched & tempered condition):
• Tensile Strength: 900 – 1100 MPa
• Yield Strength: ≥ 700 MPa
• Elongation: ≥ 10%
• Hardness: 260 – 320 HB (depending on heat treatment)
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10083-3 41Cr4 alloy steel bars in various sizes and finishes to meet demanding engineering requirements. With high strength, good hardenability, and reliable wear resistance, 41Cr4 steel bars are suitable for a wide range of industrial and mechanical applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | 37Cr4 |
| Diameter | 32 mm |
| Shape | Round Bar |
| Length | 3 Meter |
| Standard | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10083-3 37Cr4 is a chromium alloy steel grade designed for applications requiring good strength, enhanced hardenability, and reliable wear resistance after heat treatment. With a nominal carbon content of approximately 0.37% and chromium as the primary alloying element, 37Cr4 steel provides improved mechanical properties compared to non-alloy carbon steels.
37Cr4 alloy steel bars are widely used in engineering components subjected to torsion, bending, and moderate to high dynamic loads. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 37Cr4 alloy steel bars, supplied with certified mill test certificates and strict quality control to meet international standards.
Forms of Supply (as per grade):
Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars
Explanation of Designation (37Cr4):
• 37 – Approx. 0.37% carbon content
• Cr – Chromium for improved strength, wear resistance, and hardenability
• 4 – Indicates chromium content range as per EN standard
Chemical Composition (% – typical limits):
• Carbon (C): 0.34 – 0.41
• Manganese (Mn): 0.60 – 0.90
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.90 – 1.20
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, quenched & tempered condition):
• Tensile Strength: 850 – 1050 MPa
• Yield Strength: ≥ 650 MPa
• Elongation: ≥ 11%
• Hardness: 250 – 320 HB (depending on heat treatment)
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10083-3 37Cr4 alloy steel bars in various sizes and finishes to meet demanding industrial requirements. With reliable strength, good wear resistance, and excellent heat treatment response, 37Cr4 steel bars are suitable for a wide range of engineering and mechanical applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar
Product Details:
| Grade | 39MnCrB6-2 |
| Diameter | 32 mm |
| Shape | Round Bar |
| Length | 3 Meter |
| Standard | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10083-3 39MnCrB6-2 is a boron-alloyed manganese-chromium steel grade developed for applications requiring high strength, superior hardenability, and excellent wear resistance after quenching and tempering.
With a nominal carbon content of approximately 0.39%, along with manganese and chromium as key alloying elements, 39MnCrB6-2 steel provides enhanced tensile strength and improved fatigue performance compared to lower carbon boron steels. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 39MnCrB6-2 alloy steel bars, supplied with certified mill test certificates and strict quality assurance.
Forms of Supply (as per grade):
Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars
Explanation of Designation (39MnCrB6-2):
• 39 – Approx. 0.39% carbon content
• Mn – Manganese for strength and improved hardenability
• Cr – Chromium for enhanced wear resistance and depth of hardening
• B – Boron for significantly increased hardenability
• 6-2 – Indicates alloying content range as per EN standard
Chemical Composition (% – typical limits):
• Carbon (C): 0.36 – 0.42
• Manganese (Mn): 1.20 – 1.50
• Silicon (Si): ≤ 0.40
• Chromium (Cr): 0.30 – 0.60
• Boron (B): 0.0008 – 0.0050
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.035
Mechanical Properties (Typical, quenched & tempered condition):
• Tensile Strength: 950 – 1150 MPa
• Yield Strength: ≥ 750 MPa
• Elongation: ≥ 9 – 11%
• Hardness: 280 – 340 HB (depending on heat treatment and section size)
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10083-3 39MnCrB6-2 alloy steel bars in various sizes and finishes to meet demanding industrial requirements. With high strength, superior hardenability, and reliable performance after heat treatment, 39MnCrB6-2 steel bars are an ideal choice for automotive and heavy engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation.
#EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar