Ladhani Metal Corporation
Girgaon, Mumbai, Maharashtra
GST No. 27AOZPB3027K1ZM
TrustSEAL Verified
Call 07942537951 91% Response Rate
SEND EMAIL
Product Details:
| Material | Alloy Steel |
| Grade | S275J2 |
| Thickness | 8 mm |
| Width | 1000 mm |
| Length | 1250 |
| Country Of Origin | India |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S235JR, S235J0, S235J2, S275JR, S275J0, S275J2, S355JR, S355J0, S355J2, S355J2 |
EN 10025-2 S275J2 is a low carbon structural steel grade intended for general structural and fabrication applications where higher strength and reliable impact toughness at low temperatures are required. Supplied in plate, sheet, coil, and strip form, S275J2 steel offers excellent weldability, good formability, and uniform mechanical properties. This grade conforms to the EN 10025-2 standard for non-alloy structural steels and is suitable for use in environments where impact performance at −20°C is specified.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-2 S275J2 steel plates, sheets, coils, and strips. Our materials are sourced from approved mills and supplied in hot-rolled condition, ensuring consistent quality, dimensional accuracy, and full compliance with EN 10025-2 requirements for structural applications.
Forms Available: plate, sheet, coil, strip
Grades Available: S275JR, S275J0, S275J2, S275K2
Explanation of Designation:
• S – Structural steel
• 275 – Minimum yield strength in MPa
• J2 – Impact test at −20°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.22
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
• Silicon (Si): ≤ 0.55
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 410 – 560 MPa
• Yield Strength: ≥ 275 MPa
• Elongation: 23% (for thickness ≤ 16 mm)
Key Features:
• Verified impact toughness at −20°C
• Excellent weldability using standard welding procedures
• Good formability for bending and fabrication
• Higher strength compared to S235 grades
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-2 S275J2 steel plates along with sheets, coils, and strips for demanding structural applications. With excellent weldability, dependable impact performance at −20°C, and compliance with EN 10025-2 standards, S275J2 steel plate is a reliable and economical choice for low-temperature and higher-strength engineering projects. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100252 #EN100252Steel #EN10025StructuralSteel #EN100252StructuralSteel #S235JR #S275JR #S355JR #S355J2 #StructuralSteelPlate #StructuralSteelSheet #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #HotRolledSteel #LowCarbonSteel #WeldableSteel #MachinableSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN10025Supplier #EN10025Manufacturer #EN10025Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #HeavyEngineering #InfrastructureSteel #CivilEngineeringSteel #ASTMEquivalentSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN10025SteelSupplier #EN10025SteelManufacturer #EN10025SteelExporter #LadhaniMetal#Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Material | Alloy Steel |
| Grade | EN 10025-6 S960QL |
| Thickness | 6 mm |
| Width | 1000 mm |
| Length | 2440 mm |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S690QL, S690QL1, S690QL2, S890QL, S890QL1, S960QL |
EN 10025-6 S960QL is an ultra-high-strength quenched and tempered fine-grain structural steel grade designed for applications requiring extreme yield strength, excellent toughness, and reliable performance under very high loads and demanding conditions. Supplied in plate, sheet, coil, and strip form, S960QL steel undergoes precise quenching and tempering heat treatment to achieve an exceptional combination of tensile strength, ductility, and impact toughness. This grade complies with the EN 10025-6 standard and is suitable for advanced engineering, structural, and offshore applications where maximum strength is required.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-6 S960QL steel plates, along with sheets, coils, and strips. Our materials are sourced from approved mills and supplied in full compliance with EN 10025-6 specifications, ensuring dimensional accuracy, consistent quality, and ultra-high-strength performance.
Forms Available: plate, sheet, coil, strip
Grades Available: S960QL
Explanation of Designation:
• S – Structural steel
• 960 – Minimum yield strength in MPa
• Q – Quenched
• L – Thermo-mechanically treated with impact toughness at −40°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.22
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
• Silicon (Si): ≤ 0.50
• Chromium (Cr): ≤ 0.30
• Nickel (Ni): ≤ 0.65
• Molybdenum (Mo): ≤ 0.25
• Vanadium (V): ≤ 0.12
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 1,050 – 1,150 MPa
• Yield Strength: ≥ 960 MPa
• Elongation: 9% (for thickness ≤ 16 mm)
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10025-6 S960QL steel plates along with sheets, coils, and strips for ultra-high-strength structural applications. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100256 #EN100256Steel #EN10025StructuralSteel #EN100256StructuralSteel #QuenchedAndTemperedSteel #HighStrengthStructuralSteel #S690QL #S690QL1 #S690QL2 #S890QL #S890QL1 #S960QL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #HeavyEngineeringSteel #CranesSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #QuenchedTemperedSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100256Supplier #EN100256Manufacturer #EN100256Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100256SteelSupplier #EN100256SteelManufacturer #EN100256SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Material | Alloy Steel |
| Grade | S275JR |
| Thickness | 6 mm |
| Country Of Origin | India |
| Width Range | Up to 2500 mm; strips from 10 mm onward |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S235JR, S235J0, S235J2, S275JR, S275J0, S275J2, S355JR, S355J0, S355J2, S355J2 |
EN 10025-2 S275JR is a low carbon structural steel grade widely used for general structural and fabrication applications where higher strength than S235JR is required. Supplied in strip, coil, sheet, and plate form, S275JR steel offers excellent weldability, good formability, and uniform mechanical properties, making it suitable for components subjected to moderate mechanical stress under normal atmospheric conditions. This grade is covered under the EN 10025-2 standard for non-alloy structural steels.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-2 S275JR steel strips, coils, sheets, and plates. Our materials are sourced from approved mills and supplied in hot-rolled condition, ensuring consistent quality, dimensional accuracy, and full compliance with EN 10025-2 requirements for structural applications.
Forms Available: strip, coil, sheet, plate
Grades Available: S275JR, S275J0, S275J2, S275K2
Explanation of Designation:
• S – Structural steel
• 275 – Minimum yield strength in MPa (other options include 185, 235, 355)
• JR – Impact test at +20°C
• J0 – Impact test at 0°C
• J2 – Impact test at −20°C
• K2 – Impact test at −20°C with higher impact energy (40 J)
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.22
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
• Silicon (Si): ≤ 0.55
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 410 – 560 MPa
• Yield Strength: ≥ 275 MPa
• Elongation: 23% (for thickness ≤ 16 mm)
Key Features:
• Excellent weldability using conventional welding processes
• Good formability for rolling, bending, and profiling
• Higher strength compared to S235 grades
• Uniform mechanical properties across thickness ranges
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-2 S275JR steel strips along with coils, sheets, and plates for structural and fabrication applications. For customized sizes, slit widths, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100252 #EN100252Steel #EN10025StructuralSteel #EN100252StructuralSteel #S235JR #S275JR #S355JR #S355J2 #StructuralSteelPlate #StructuralSteelSheet #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #HotRolledSteel #LowCarbonSteel #WeldableSteel #MachinableSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN10025Supplier #EN10025Manufacturer #EN10025Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #HeavyEngineering #InfrastructureSteel #CivilEngineeringSteel #ASTMEquivalentSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN10025SteelSupplier #EN10025SteelManufacturer #EN10025SteelExporter #LadhaniMetal#Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Material | Alloy Steel |
| Grade | S235J2W |
| Thickness | 8 mm |
| Width | 1250 mm |
| Length | 2440 mm |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S235J0W, S235J2W, S355J0W, S355J2W, S355K2W |
EN 10025-5 S235J2W is a weather-resistant structural steel grade designed for applications requiring reliable strength, good toughness, and enhanced resistance to atmospheric corrosion. Supplied in plate, sheet, coil, and strip form, S235J2W steel develops a protective oxide layer when exposed to the atmosphere, significantly reducing corrosion rates and minimizing the need for painting or surface coatings. This grade complies with the EN 10025-5 standard and is suitable for structural applications requiring impact testing at −20°C.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-5 S235J2W steel plates, along with sheets, coils, and strips.
Forms Available: plate, sheet, coil, strip
Grades Available: S235J2W
Explanation of Designation:
• S – Structural steel
• 235 – Minimum yield strength in MPa
• J2 – Impact test at −20°C
• W – Weathering steel with improved atmospheric corrosion resistance
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.16
• Manganese (Mn): ≤ 1.40
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
• Silicon (Si): ≤ 0.50
• Copper (Cu): 0.25 – 0.55
• Chromium (Cr): ≤ 0.40
• Nickel (Ni): ≤ 0.65
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 360 – 510 MPa
• Yield Strength: ≥ 235 MPa
• Elongation: 26% (for thickness ≤ 16 mm)
Key Features:
• Excellent resistance to atmospheric corrosion
• Impact toughness tested at −20°C
• Reduced maintenance and surface treatment requirements
• Good strength combined with good toughness
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-5 S235J2W steel plates along with sheets, coils, and strips for weather-exposed structural applications. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100255 #EN100255Steel #EN10025StructuralSteel #EN100255StructuralSteel #WeatheringSteel #AtmosphericCorrosionResistantSteel #CortenEquivalentSteel #S235J0W #S235J2W #S355J0W #S355J2W #S355K2W #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OutdoorSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #WeatherResistantSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100255Supplier #EN100255Manufacturer #EN100255Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100255SteelSupplier #EN100255SteelManufacturer #EN100255SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Thickness | 3 mm |
| Material Grade | EN 10025-6 S890QL1 |
| Width | 900 mm |
| Length | 2400 mm |
| Form | Sheet |
| Country Standards | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S690QL, S690QL1, S690QL2, S890QL, S890QL1, S960QL |
EN 10025-6 S890QL1 is an ultra-high-strength quenched and tempered fine-grain structural steel grade designed for applications requiring exceptional yield strength, superior toughness, and reliable performance under extreme loads and low-temperature conditions. Supplied in sheet, plate, coil, and strip form, S890QL1 steel undergoes precise quenching and tempering heat treatment to achieve a superior combination of tensile strength, ductility, and impact toughness. This grade complies with the EN 10025-6 standard and is suitable for advanced structural, heavy engineering, and offshore applications.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-6 S890QL1 steel sheets, along with plates, coils, and strips. Our materials are sourced from approved mills and supplied in full compliance with EN 10025-6 specifications, ensuring dimensional accuracy, consistent quality, and reliable ultra-high-strength performance.
Forms Available: plate, sheet, coil, strip
Grades Available: S890QL1
Explanation of Designation:
• S – Structural steel
• 890 – Minimum yield strength in MPa
• Q – Quenched
• L1 – Thermo-mechanically treated with impact toughness at −60°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.22
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
• Silicon (Si): ≤ 0.50
• Chromium (Cr): ≤ 0.30
• Nickel (Ni): ≤ 0.65
• Molybdenum (Mo): ≤ 0.25
• Vanadium (V): ≤ 0.12
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 940 – 1,050 MPa
• Yield Strength: ≥ 890 MPa
• Elongation: 10% (for thickness ≤ 16 mm)
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10025-6 S890QL1 steel sheets along with plates, coils, and strips for ultra-high-strength structural applications. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100256 #EN100256Steel #EN10025StructuralSteel #EN100256StructuralSteel #QuenchedAndTemperedSteel #HighStrengthStructuralSteel #S690QL #S690QL1 #S690QL2 #S890QL #S890QL1 #S960QL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #HeavyEngineeringSteel #CranesSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #QuenchedTemperedSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100256Supplier #EN100256Manufacturer #EN100256Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100256SteelSupplier #EN100256SteelManufacturer #EN100256SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Material | Alloy Steel |
| Thickness | 2.00 mm |
| Width | 75 mm |
| Grade | 10025-6 S890QL |
| Coil Or Length | Cut Length |
| Usage | Automotive, Construction, Fabrication |
| Material Grades | S690QL, S690QL1, S690QL2, S890QL, S890QL1, S960QL |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10025-6 S890QL is an ultra-high-strength quenched and tempered fine-grain structural steel grade designed for applications requiring exceptional yield strength, high toughness, and reliable performance under extreme loads and demanding conditions. Supplied in strip, coil, plate, and sheet form, S890QL steel undergoes a precise quenching and tempering heat treatment to achieve a superior combination of tensile strength, ductility, and impact toughness. This grade complies with the EN 10025-6 standard and is suitable for advanced structural, heavy engineering, and offshore applications.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-6 S890QL steel strips, along with coils, plates, and sheets. Our materials are sourced from approved mills and supplied in full compliance with EN 10025-6 specifications, ensuring dimensional accuracy, consistent quality, and reliable ultra-high-strength performance.
Forms Available: plate, sheet, coil, strip
Grades Available: S890QL
Explanation of Designation:
• S – Structural steel
• 890 – Minimum yield strength in MPa
• Q – Quenched
• L – Thermo-mechanically treated with impact toughness at −40°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.22
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
• Silicon (Si): ≤ 0.50
• Chromium (Cr): ≤ 0.30
• Nickel (Ni): ≤ 0.65
• Molybdenum (Mo): ≤ 0.25
• Vanadium (V): ≤ 0.12
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 940 – 1,050 MPa
• Yield Strength: ≥ 890 MPa
• Elongation: 10% (for thickness ≤ 16 mm)
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10025-6 S890QL steel strips along with plates, sheets, and coils for ultra-high-strength structural applications. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100256 #EN100256Steel #EN10025StructuralSteel #EN100256StructuralSteel #QuenchedAndTemperedSteel #HighStrengthStructuralSteel #S690QL #S690QL1 #S690QL2 #S890QL #S890QL1 #S960QL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #HeavyEngineeringSteel #CranesSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #QuenchedTemperedSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100256Supplier #EN100256Manufacturer #EN100256Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100256SteelSupplier #EN100256SteelManufacturer #EN100256SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Steel Grade | S690QL |
| Yield Strength | 690 MPa |
| Thickness | 6 mm |
| Standards | EN 10025-6 |
| Width | 1500 mm |
| Length | 6000 mm |
| Heat Treatment | Quenched Tempered |
| Application | Mining Equipment, Heavy Structure, Crane |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S690QL, S690QL1, S690QL2, S890QL, S890QL1, S960QL |
EN 10025-6 S690QL is a high-strength quenched and tempered fine-grain structural steel grade designed for applications requiring exceptional yield strength, excellent toughness, and reliable performance under heavy loads. Supplied in sheet, plate, coil, and strip form, S690QL steel undergoes a quenching and tempering heat treatment process to achieve a superior combination of strength, ductility, and toughness. This grade complies with the EN 10025-6 standard and is suitable for demanding structural applications where high mechanical performance is critical.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-6 S690QL steel sheets, along with plates, coils, and strips. Our materials are sourced from approved mills and supplied in full compliance with EN 10025-6 specifications, ensuring dimensional accuracy, consistent quality, and reliable high-strength performance.
Forms Available: plate, sheet, coil, strip
Grades Available: S690QL
Explanation of Designation:
• S – Structural steel
• 690 – Minimum yield strength in MPa
• Q – Quenched
• L – Thermo-mechanically treated with impact toughness at −20°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.22
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
• Silicon (Si): ≤ 0.50
• Chromium (Cr): ≤ 0.30
• Nickel (Ni): ≤ 0.65
• Molybdenum (Mo): ≤ 0.25
• Vanadium (V): ≤ 0.12
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 740 – 900 MPa
• Yield Strength: ≥ 690 MPa
• Elongation: 12% (for thickness ≤ 16 mm)
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-6 S690QL steel sheets along with plates, coils, and strips for demanding high-strength structural applications. With exceptional mechanical performance, quenching and tempering treatment, and full compliance with EN 10025-6 standards, S690QL steel sheet is an ideal solution for heavy-duty engineering and structural requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100256 #EN100256Steel #EN100256StructuralSteel #QuenchedAndTemperedSteel #HighStrengthStructuralSteel #S690QL #S690QL1 #S690QL2 #S890QL #S890QL1 #S960QL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #HeavyEngineeringSteel #CranesSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #QuenchedTemperedSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100256Supplier #EN100256Manufacturer #EN100256Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100256SteelSupplier #EN100256SteelManufacturer #EN100256SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Structural Grade | S420N |
| Thickness | 6 mm |
| Surface Finish | Normalized |
| Application | Tower, Building, Industrial Shed |
| Standards | EN 10025-3 |
| Width | 1500 mm |
| Length | 6000 mm |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10025-3 S355NL is a normalized fine-grain structural steel grade intended for demanding structural and fabrication applications where high strength and excellent impact toughness at very low temperatures are required. Supplied in strip, sheet, plate, and coil form, S355NL steel is delivered in normalized or normalized rolled condition, ensuring a refined grain structure and consistent mechanical performance. This grade conforms to the EN 10025-3 standard and is suitable for use in applications requiring impact testing at −50°C
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10025-3 S355NL steel strips, along with sheets, plates, and coils.
Forms Available: strip, sheet, plate, coil
Grades Available: S355N, S355NL
Explanation of Designation:
• S – Structural steel
• 355 – Minimum yield strength in MPa
• N – Normalized or normalized rolled delivery condition
• L – Impact test at −50°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.20
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.030
• Sulphur (S): ≤ 0.030
• Silicon (Si): ≤ 0.55
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 470 – 630 MPa
• Yield Strength: ≥ 355 MPa
• Elongation: 22% (for thickness ≤ 16 mm)
Key Features:
• Guaranteed impact toughness at −50°C
• Normalized delivery for stable and uniform properties
• High strength combined with excellent low-temperature toughness
• Very good weldability with standard welding procedures
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-3 S355NL steel strips along with sheets, plates, and coils for demanding structural applications. With excellent low-temperature impact performance, normalized delivery, and compliance with EN 10025-3 standards, S355NL steel strip is a dependable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Structural Grade | S275NL |
| Thickness | 8 mm |
| Surface Finish | Normalized |
| Application | Building, Industrial Shed, Bridge |
| Standards | EN 10025-3 |
| Width | 1500 mm |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10025-3 S275NL is a normalized fine-grain structural steel grade designed for structural and fabrication applications requiring reliable strength and enhanced impact toughness at low temperatures. Supplied in plate, sheet, coil, and strip form, S275NL steel is delivered in normalized or normalized rolled condition, providing a refined grain structure and consistent mechanical performance. This grade conforms to the EN 10025-3 standard and is suitable for use in applications where impact testing at −50°C is specified.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-3 S275NL steel plates, along with sheets, coils, and strips.
Forms Available: plate, sheet, coil, strip
Grades Available: S275N, S275NL
Explanation of Designation:
• S – Structural steel
• 275 – Minimum yield strength in MPa
• N – Normalized or normalized rolled delivery condition
• L – Impact test at −50°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.20
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.030
• Sulphur (S): ≤ 0.030
• Silicon (Si): ≤ 0.55
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 370 – 510 MPa
• Yield Strength: ≥ 275 MPa
• Elongation: 22% (for thickness ≤ 16 mm)
Key Features:
• Guaranteed impact toughness at −50°C
• Normalized delivery for consistent mechanical properties
• Excellent weldability with standard welding procedures
• Fine-grain structure for improved toughness and strength
• Suitable for low-temperature and offshore applications
• Available in plate, sheet, coil, and strip forms
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-3 S275NL steel plates along with sheets, coils, and strips for demanding structural applications. With excellent low-temperature impact performance, normalized delivery, and compliance with EN 10025-3 standards, S275NL steel plate is a dependable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Steel Type | Alloy Steel |
| Thickness | 0.50 mm |
| Width | 900 mm |
| Grade | S355M |
| Application | General Engineering, Fabrication, Roofing, Automotive, Structure |
| Form | Coil |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S275M, S275ML, S355M, S355ML, S420M, S420ML, S460M, S460ML |
EN 10025-4 S355M is a thermomechanically rolled fine-grain structural steel grade designed for demanding structural and fabrication applications where higher strength, good weldability, and reliable toughness are required. Supplied in coil, plate, sheet, and strip form, S355M steel is delivered in thermo mechanically rolled (M) condition, providing a refined grain structure and consistent mechanical properties across thickness ranges. This grade complies with the EN 10025-4 standard and is suitable for structural applications requiring controlled strength and toughness.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-4 S355M steel coils, along with plates, sheets, and strips.
Forms Available: plate, sheet, coil, strip
Grades Available: S355M, S355ML
Explanation of Designation:
• S – Structural steel
• 355 – Minimum yield strength in MPa
• M – Thermo mechanically rolled delivery condition
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.16
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.030
• Sulphur (S): ≤ 0.030
• Silicon (Si): ≤ 0.50
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 470 – 630 MPa
• Yield Strength: ≥ 355 MPa
• Elongation: 22% (for thickness ≤ 16 mm)
Key Features:
• Higher yield strength for demanding structural applications
• Thermo mechanically rolled for fine-grain and uniform structure
• Good toughness and strength balance
• Excellent weldability with proper welding practices
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10025-4 S355M steel coils along with plates, sheets, and strips for high-strength structural applications. With thermomechanically rolled delivery, reliable mechanical properties, and full compliance with EN 10025-4 standards, S355M steel coil is an excellent choice for modern structural and fabrication requirements. For customized sizes, grade selection, or technical support, contact Ladhani Metal Corporation.
#EN10025 #EN100254 #EN100254Steel #EN10025StructuralSteel #EN100254StructuralSteel #FineGrainStructuralSteel #ThermomechanicallyRolledSteel #TMCRSteel #S275M #S275ML #S355M #S355ML #S420M #S420ML #S460M #S460ML #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #ThermomechanicallyRolled #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100254Supplier #EN100254Manufacturer #EN100254Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100254SteelSupplier #EN100254SteelManufacturer #EN100254SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Structural Grade | S420ML |
| Thickness | 12 mm |
| Surface Finish | As Rolled |
| Application | Industrial Shed, Building, Bridge, Tower |
| Standards | EN 10025-4 |
| Width | 1500 mm |
| Length | 6000 mm |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S275M, S275ML, S355M, S355ML, S420M, S420ML, S460M, S460ML |
EN 10025-4 S420ML is a thermomechanically rolled fine-grain structural steel grade designed for high-strength structural and fabrication applications requiring excellent impact toughness at low temperatures. Supplied in plate, sheet, coil, and strip form, S420ML steel is delivered in thermo mechanically rolled (M) condition, ensuring a refined grain structure, consistent mechanical properties, and reliable performance in demanding environments. This grade complies with the EN 10025-4 standard and is suitable for applications requiring impact testing at −50°C.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-4 S420ML steel plates, along with sheets, coils, and strips.
Forms Available: plate, sheet, coil, strip
Grades Available: S420M, S420ML
Explanation of Designation:
• S – Structural steel
• 420 – Minimum yield strength in MPa
• M – Thermo mechanically rolled delivery condition
• L – Impact test at −50°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.18
• Manganese (Mn): ≤ 1.70
• Phosphorus (P): ≤ 0.030
• Sulphur (S): ≤ 0.030
• Silicon (Si): ≤ 0.50
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 520 – 680 MPa
• Yield Strength: ≥ 420 MPa
• Elongation: 19% (for thickness ≤ 16 mm)
Key Features:
• Excellent impact toughness at −50°C
• High yield strength for demanding structural applications
• Thermo mechanically rolled for uniform fine-grain structure
• Very good weldability with controlled welding procedures
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-4 S420ML steel plates along with sheets, coils, and strips for demanding structural applications. With excellent low-temperature impact performance, thermomechanically rolled delivery, and full compliance with EN 10025-4 standards, S420ML steel plate is a dependable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100254 #EN100254Steel #EN10025StructuralSteel #EN100254StructuralSteel #FineGrainStructuralSteel #ThermomechanicallyRolledSteel #TMCRSteel #S275M #S275ML #S355M #S355ML #S420M #S420ML #S460M #S460ML #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #ThermomechanicallyRolled #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100254Supplier #EN100254Manufacturer #EN100254Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100254SteelSupplier #EN100254SteelManufacturer #EN100254SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Steel Type | Alloy Steel |
| Thickness | 0.80 mm |
| Width | 1000 mm |
| Grade | S460M |
| Application | Fabrication, Structure, Roofing, Automotive, Panels, General Engineering |
| Form | Coil |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S275M, S275ML, S355M, S355ML, S420M, S420ML, S460M, S460ML |
EN 10025-4 S460M is a high-strength thermomechanically rolled fine-grain structural steel grade developed for demanding structural and fabrication applications where higher load-bearing capacity, good toughness, and excellent weldability are required. Supplied in coil, plate, sheet, and strip form, S460M steel is delivered in thermo mechanically rolled (M) condition, ensuring a refined grain structure and stable mechanical properties across thickness ranges. This grade complies with the EN 10025-4 standard and is suitable for heavy-duty structural applications.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-4 S460M steel coils, along with plates, sheets, and strips.
Forms Available: plate, sheet, coil, strip
Grades Available: S460M, S460ML
Explanation of Designation:
• S – Structural steel
• 460 – Minimum yield strength in MPa
• M – Thermo mechanically rolled delivery condition
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.20
• Manganese (Mn): ≤ 1.80
• Phosphorus (P): ≤ 0.030
• Sulphur (S): ≤ 0.030
• Silicon (Si): ≤ 0.50
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 540 – 720 MPa
• Yield Strength: ≥ 460 MPa
• Elongation: 17% (for thickness ≤ 16 mm)
Key Features:
• High yield strength for heavy and highly loaded structures
• Thermo mechanically rolled for refined fine-grain structure
• Good toughness combined with excellent strength
• Very good weldability with controlled welding procedures
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10025-4 S460M steel coils along with plates, sheets, and strips for high-strength structural applications. With thermomechanically rolled delivery, reliable mechanical properties, and full compliance with EN 10025-4 standards, S460M steel coil is an excellent solution for modern engineering and construction requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100254 #EN100254Steel #EN10025StructuralSteel #EN100254StructuralSteel #FineGrainStructuralSteel #ThermomechanicallyRolledSteel #TMCRSteel #S275M #S275ML #S355M #S355ML #S420M #S420ML #S460M #S460ML #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #ThermomechanicallyRolled #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100254Supplier #EN100254Manufacturer #EN100254Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100254SteelSupplier #EN100254SteelManufacturer #EN100254SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Material | Alloy Steel |
| Thickness | 1.20 mm |
| Width | 75 mm |
| Grade | EN 10025-3 S460NL |
| Coil Or Length | Cut Length |
| Usage | Automotive, Construction, General Engineering, Fabrication |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S275N, S275NL, S355N, S355NL |
EN 10025-3 S460NL is a high-strength normalized fine-grain structural steel grade designed for demanding structural and fabrication applications where superior yield strength and excellent impact toughness at very low temperatures are required. Supplied in strip, sheet, plate, and coil form, S460NL steel is delivered in normalized or normalized rolled condition, providing a refined grain structure and consistent mechanical performance. This grade conforms to the EN 10025-3 standard and is suitable for applications requiring impact testing at −50°C.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-3 S460NL steel strips, along with sheets, plates, and coils.
Forms Available: strip, sheet, plate, coil
Grades Available: S460N, S460NL
Explanation of Designation:
• S – Structural steel
• 460 – Minimum yield strength in MPa
• N – Normalized or normalized rolled delivery condition
• L – Impact test at −50°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.22
• Manganese (Mn): ≤ 1.80
• Phosphorus (P): ≤ 0.030
• Sulphur (S): ≤ 0.030
• Silicon (Si): ≤ 0.60
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 560 – 720 MPa
• Yield Strength: ≥ 460 MPa
• Elongation: 18% (for thickness ≤ 16 mm)
Key Features:
• Guaranteed impact toughness at −50°C
• Normalized delivery ensures stable and uniform mechanical properties
• High yield strength for heavy-duty structural applications
• Excellent weldability with controlled procedures
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-3 S460NL steel strips along with sheets, plates, and coils for demanding structural applications. With excellent low-temperature impact performance, normalized delivery, and compliance with EN 10025-3 standards, S460NL steel strip is a dependable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Steel Type | Alloy Steel |
| Thickness | 0.50 mm |
| Width | 762 mm |
| Grade | EN 10025-3 S460N |
| Application | General Engineering, Automotive, Roofing, Structure, Fabrication |
| Form | Coil |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10025-3 S460N is a high-strength normalized fine-grain structural steel grade designed for structural and fabrication applications requiring superior yield strength, good toughness, and uniform mechanical properties. Supplied in coil, sheet, plate, and strip form, S460N steel is delivered in normalized or normalized rolled condition, providing a refined grain structure and reliable performance. This grade conforms to the EN 10025-3 standard and is suitable for structures subjected to moderate and low-temperature service conditions.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-3 S460N steel coils, along with sheets, plates, and strips.
Forms Available: coil, sheet, plate, strip
Grades Available: S460N, S460NL
Explanation of Designation:
• S – Structural steel
• 460 – Minimum yield strength in MPa
• N – Normalized or normalized rolled delivery condition
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.22
• Manganese (Mn): ≤ 1.80
• Phosphorus (P): ≤ 0.030
• Sulphur (S): ≤ 0.030
• Silicon (Si): ≤ 0.60
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 560 – 720 MPa
• Yield Strength: ≥ 460 MPa
• Elongation: 18% (for thickness ≤ 16 mm)
Key Features:
• High yield strength for demanding structural applications
• Normalized delivery ensures uniform mechanical properties
• Good impact toughness for moderate to low-temperature service
• Excellent weldability using controlled welding practices
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-3 S460N steel coils along with sheets, plates, and strips for high-strength structural applications. With normalized delivery, excellent mechanical properties, and compliance with EN 10025-3 standards, S460N steel coil is a reliable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Material | Alloy Steel |
| Thickness | 1.50 mm |
| Width | 50 mm |
| Grade | EN 10025-3 S355NL |
| Coil Or Length | Cut Length |
| Usage | Construction, General Engineering, Fabrication, Automotive |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S275N, S275NL, S355N, S355NL |
EN 10025-3 S355NL is a normalized fine-grain structural steel grade intended for demanding structural and fabrication applications where high strength and excellent impact toughness at very low temperatures are required. Supplied in strip, sheet, plate, and coil form, S355NL steel is delivered in normalized or normalized rolled condition, ensuring a refined grain structure and consistent mechanical performance. This grade conforms to the EN 10025-3 standard and is suitable for use in applications requiring impact testing at −50°C.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10025-3 S355NL steel strips, along with sheets, plates, and coils.
Forms Available: strip, sheet, plate, coil
Grades Available: S355N, S355NL
Explanation of Designation:
• S – Structural steel
• 355 – Minimum yield strength in MPa
• N – Normalized or normalized rolled delivery condition
• L – Impact test at −50°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.20
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.030
• Sulphur (S): ≤ 0.030
• Silicon (Si): ≤ 0.55
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 470 – 630 MPa
• Yield Strength: ≥ 355 MPa
• Elongation: 22% (for thickness ≤ 16 mm)
Key Features:
• Guaranteed impact toughness at −50°C
• Normalized delivery for stable and uniform properties
• High strength combined with excellent low-temperature toughness
• Very good weldability with standard welding procedures
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-3 S355NL steel strips along with sheets, plates, and coils for demanding structural applications. With excellent low-temperature impact performance, normalized delivery, and compliance with EN 10025-3 standards, S355NL steel strip is a dependable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Steel Type | Alloy Steel |
| Thickness | 0.80 mm |
| Width | 600 mm |
| Grade | 10025-3 S355N |
| Application | General Engineering, Fabrication, Roofing, Automotive |
| Form | Coil |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10025-3 S355N is a normalized fine-grain structural steel grade developed for structural and fabrication applications requiring high strength, good toughness, and uniform mechanical properties. Supplied in coil, sheet, plate, and strip form, S355N steel is delivered in normalized or normalized rolled condition, ensuring a refined grain structure and reliable performance. This grade complies with EN 10025-3 and is suitable for structures exposed to moderate and low-temperature service conditions.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-3 S355N steel coils, along with sheets, plates, and strips. Our materials are sourced from approved mills and supplied in normalized condition, ensuring dimensional accuracy, consistent quality, and full compliance with EN 10025-3 requirements for fine-grain structural steels.
Forms Available: coil, sheet, plate, strip
Grades Available: S355N, S355NL
Explanation of Designation:
• S – Structural steel
• 355 – Minimum yield strength in MPa
• N – Normalized or normalized rolled delivery condition
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.20
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.030
• Sulphur (S): ≤ 0.030
• Silicon (Si): ≤ 0.55
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 470 – 630 MPa
• Yield Strength: ≥ 355 MPa
• Elongation: 22% (for thickness ≤ 16 mm)
Key Features:
• Normalized delivery for consistent and stable properties
• High strength combined with good toughness
• Excellent weldability with standard welding practices
• Fine-grain structure for improved mechanical performance
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-3 S355N steel coils along with sheets, plates, and strips for high-strength structural applications. With normalized delivery, dependable mechanical properties, and compliance with EN 10025-3 standards, S355N steel coil is a reliable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Steel Grade | S235JR |
| Thickness | 6 mm |
| Standards | EN 10025-2 |
| Width | 1250 mm |
| Length | 6000 mm |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S235JR, S235J0, S235J2, S275JR, S275J0, S275J2, S355JR, S355J0, S355J2 |
EN 10025-2 S235JR is a low carbon structural steel grade widely used for general structural applications in construction, fabrication, and engineering projects. Supplied in sheet, plate, coil, and strip form, S235JR steel offers excellent weldability, good formability, and uniform mechanical properties, making it suitable for components that require moderate strength and reliable performance under normal atmospheric conditions. This grade is part of the EN 10025-2 standard for non-alloy structural steels.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-2 S235JR steel sheets, plates, coils, and strips.
Forms Available: sheet, plate, coil, strip
Grades Available: S235JR, S235J0, S235J2, S235K2
Explanation of Designation:
• S – Structural steel
• 235 – Minimum yield strength in MPa (other options include 185, 275, 355)
• JR – Impact test at +20°C
• J0 – Impact test at 0°C
• J2 – Impact test at −20°C
• K2 – Impact test at −20°C with higher impact energy (40 J)
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.17 – 0.20
• Manganese (Mn): ≤ 1.40
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
• Silicon (Si): ≤ 0.55
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 360 – 510 MPa
• Yield Strength: ≥ 235 MPa
• Elongation: 26% (for thickness ≤ 16 mm)
Key Features:
• Excellent weldability using standard welding processes
• Good formability and ease of fabrication
• Uniform mechanical properties across thickness ranges
• Cost-effective structural steel solution
• Suitable for low to moderate stress applications
• Available in multiple forms: sheet, plate, coil, and strip
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-2 S235JR steel in sheet, plate, coil, and strip forms for structural and fabrication applications. For grade selection, customized sizes, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100252 #EN100252Steel #EN10025StructuralSteel #EN100252StructuralSteel #S235JR #S275JR #S355JR #S355J2 #StructuralSteelPlate #StructuralSteelSheet #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #HotRolledSteel #LowCarbonSteel #WeldableSteel #MachinableSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN10025Supplier #EN10025Manufacturer #EN10025Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #HeavyEngineering #InfrastructureSteel #CivilEngineeringSteel #ASTMEquivalentSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN10025SteelSupplier #EN10025SteelManufacturer #EN10025SteelExporter #LadhaniMetal#Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Structural Grade | S275ML |
| Thickness | 8 mm |
| Surface Finish | As Rolled |
| Application | Tower, Bridge, PEB, Building, Industrial Shed |
| Standards | EN 10025-4 |
| Width | 1800 mm |
| Length | 6000 mm |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S275M, S275ML, S355M, S355ML, S420M, S420ML, S460M, S460ML |
EN 10025-4 S275ML is a thermomechanically rolled fine-grain structural steel grade developed for structural and fabrication applications requiring reliable strength and excellent impact toughness at low temperatures. Supplied in plate, sheet, coil, and strip form, S275ML steel is delivered in thermo mechanically rolled (M) condition, ensuring a refined grain structure and consistent mechanical performance. This grade complies with the EN 10025-4 standard and is suitable for applications requiring impact testing at −50°C.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-4 S275ML steel plates, along with sheets, coils, and strips.
Forms Available: plate, sheet, coil, strip
Grades Available: S275M, S275ML
Explanation of Designation:
• S – Structural steel
• 275 – Minimum yield strength in MPa
• M – Thermo mechanically rolled delivery condition
• L – Impact test at −50°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.16
• Manganese (Mn): ≤ 1.50
• Phosphorus (P): ≤ 0.030
• Sulphur (S): ≤ 0.030
• Silicon (Si): ≤ 0.50
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 370 – 510 MPa
• Yield Strength: ≥ 275 MPa
• Elongation: 22% (for thickness ≤ 16 mm)
Key Features:
• impact toughness at −50°C
• Thermo mechanically rolled for uniform fine-grain structure
• Good strength combined with excellent low-temperature toughness
• Very good weldability with controlled procedures
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-4 S275ML steel plates along with sheets, coils, and strips for demanding structural applications. With excellent low-temperature impact performance, thermomechanically rolled delivery, and compliance with EN 10025-4 standards, S275ML steel plate is a dependable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100254 #EN100254Steel #EN10025StructuralSteel #EN100254StructuralSteel #FineGrainStructuralSteel #ThermomechanicallyRolledSteel #TMCRSteel #S275M #S275ML #S355M #S355ML #S420M #S420ML #S460M #S460ML #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #ThermomechanicallyRolled #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100254Supplier #EN100254Manufacturer #EN100254Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100254SteelSupplier #EN100254SteelManufacturer #EN100254SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Thickness | 5 mm |
| Material Grade | S355K2W |
| Width | 1000 mm |
| Length | 2400 mm |
| Form | Sheet |
| Country Standards | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S235J0W, S235J2W, S355J0W, S355J2W, S355K2W |
EN 10025-5 S355K2W is a weather-resistant structural steel grade designed for applications requiring high strength, excellent toughness, and improved resistance to atmospheric corrosion. Supplied in sheet, plate, coil, and strip form, S355K2W steel develops a stable protective oxide layer when exposed to atmospheric conditions, significantly reducing corrosion rates and lowering long-term maintenance requirements. This grade complies with the EN 10025-5 standard and is suitable for structural applications requiring impact testing at −20°C.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-5 S355K2W steel sheets, along with plates, coils, and strips.
Forms Available: plate, sheet, coil, strip
Grades Available: S355K2W
Explanation of Designation:
• S – Structural steel
• 355 – Minimum yield strength in MPa
• K2 – Impact test at −20°C (40 J)
• W – Weathering steel with improved atmospheric corrosion resistance
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.16
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
• Silicon (Si): ≤ 0.50
• Copper (Cu): 0.25 – 0.55
• Chromium (Cr): ≤ 0.40
• Nickel (Ni): ≤ 0.65
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 470 – 630 MPa
• Yield Strength: ≥ 355 MPa
• Elongation: 22% (for thickness ≤ 16 mm)
Key Features:
• Excellent resistance to atmospheric corrosion
• High impact toughness tested at −20°C (40 J)
• High yield strength for demanding structural applications
• Reduced maintenance and coating requirements
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-5 S355K2W steel sheets along with plates, coils, and strips for weather-exposed structural applications. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100255 #EN100255Steel #EN10025StructuralSteel #EN100255StructuralSteel #WeatheringSteel #AtmosphericCorrosionResistantSteel #CortenEquivalentSteel #S235J0W #S235J2W #S355J0W #S355J2W #S355K2W #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OutdoorSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #WeatherResistantSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100255Supplier #EN100255Manufacturer #EN100255Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100255SteelSupplier #EN100255SteelManufacturer #EN100255SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Steel Grade | S355J2W |
| Standards | EN 10025-5 |
| Thickness | 8 mm |
| Application | Bridge, Crane, Structure |
| Impact Tested | -20°C |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Width Range | strips from 10 mm onward |
| Material Grades | S235J0W, S235J2W, S355J0W, S355J2W, S355K2W |
EN 10025-5 S355J2W is a weather-resistant structural steel grade designed for applications requiring high strength, good toughness, and enhanced resistance to atmospheric corrosion. Supplied in strip, coil, plate, and sheet form, S355J2W steel forms a protective oxide patina when exposed to atmospheric conditions, significantly reducing corrosion rates and lowering long-term maintenance costs. This grade complies with the EN 10025-5 standard and is suitable for structural applications requiring impact testing at −20°C.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-5 S355J2W steel strips, along with coils, plates, and sheets.
Forms Available: plate, sheet, coil, strip
Grades Available: S355J2W
Explanation of Designation:
• S – Structural steel
• 355 – Minimum yield strength in MPa
• J2 – Impact test at −20°C
• W – Weathering steel with improved atmospheric corrosion resistance
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.16
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
• Silicon (Si): ≤ 0.50
• Copper (Cu): 0.25 – 0.55
• Chromium (Cr): ≤ 0.40
• Nickel (Ni): ≤ 0.65
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 470 – 630 MPa
• Yield Strength: ≥ 355 MPa
• Elongation: 22% (for thickness ≤ 16 mm)
Key Features:
• Excellent atmospheric corrosion resistance
• High yield strength with good low-temperature toughness
• Impact-tested at −20°C
• Reduced painting and maintenance requirements
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-5 S355J2W steel strips along with coils, plates, and sheets for weather-exposed structural applications. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100255 #EN100255Steel #EN10025StructuralSteel #EN100255StructuralSteel #WeatheringSteel #AtmosphericCorrosionResistantSteel #CortenEquivalentSteel #S235J0W #S235J2W #S355J0W #S355J2W #S355K2W #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OutdoorSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #WeatherResistantSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100255Supplier #EN100255Manufacturer #EN100255Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100255SteelSupplier #EN100255SteelManufacturer #EN100255SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Steel Type | Alloy Steel |
| Thickness | 0.50 mm |
| Width | 900 mm |
| Grade | 10025-5 S355J0W |
| Application | General Engineering, Roofing, Structure, Fabrication, Automotive |
| Form | Coil |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S235J0W, S235J2W, S355J0W, S355J2W, S355K2W |
EN 10025-5 S355J0W is a weather-resistant structural steel grade designed for applications requiring higher strength combined with excellent atmospheric corrosion resistance. Supplied in coil, plate, sheet, and strip form, S355J0W steel forms a protective oxide patina when exposed to atmospheric conditions, significantly reducing corrosion rates and minimizing maintenance and painting requirements. This grade complies with the EN 10025-5 standard and is suitable for structural applications requiring impact testing at 0°C.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-5 S355J0W steel coils, along with plates, sheets, and strips.
Forms Available: plate, sheet, coil, strip
Grades Available: S355J0W
Explanation of Designation:
• S – Structural steel
• 355 – Minimum yield strength in MPa
• J0 – Impact test at 0°C
• W – Weathering steel with improved atmospheric corrosion resistance
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.16
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
• Silicon (Si): ≤ 0.50
• Copper (Cu): 0.25 – 0.55
• Chromium (Cr): ≤ 0.40
• Nickel (Ni): ≤ 0.65
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 470 – 630 MPa
• Yield Strength: ≥ 355 MPa
• Elongation: 22% (for thickness ≤ 16 mm)
Key Features:
• Excellent resistance to atmospheric corrosion
• Higher yield strength for demanding structural applications
• Impact-tested at 0°C
• Reduced maintenance and coating requirements
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-5 S355J0W steel coils along with plates, sheets, and strips for weather-exposed structural applications. With enhanced atmospheric corrosion resistance, reliable mechanical properties, and compliance with EN 10025-5 standards, S355J0W steel coil is a durable and cost-effective solution for outdoor structural requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100255 #EN100255Steel #EN10025StructuralSteel #WeatheringSteel #AtmosphericCorrosionResistantSteel #CortenEquivalentSteel #S235J0W #S235J2W #S355J0W #S355J2W #S355K2W #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #WeatherResistantSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100255Supplier #EN100255Manufacturer #EN100255Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100255SteelSupplier #EN100255SteelManufacturer #EN100255SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Thickness | 1.2 mm |
| Material Grade | S235J0W |
| Width | 900 mm |
| Length | 1800 mm |
| Form | Sheet |
| Country Standards | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10025-5 S235J0W is a weather-resistant structural steel grade designed for applications requiring good mechanical strength along with improved atmospheric corrosion resistance. Supplied in sheet, plate, coil, and strip form, S235J0W steel develops a protective oxide layer when exposed to atmospheric conditions, reducing the need for painting or additional surface protection. This grade complies with the EN 10025-5 standard and is suitable for structural applications requiring impact testing at 0°C.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-5 S235J0W steel sheets, along with plates, coils, and strips.
Forms Available: plate, sheet, coil, strip
Grades Available: S235J0W
Explanation of Designation:
• S – Structural steel
• 235 – Minimum yield strength in MPa
• J0 – Impact test at 0°C
• W – Weathering steel with improved atmospheric corrosion resistance
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.16
• Manganese (Mn): ≤ 1.40
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
• Silicon (Si): ≤ 0.50
• Copper (Cu): 0.25 – 0.55
• Chromium (Cr): ≤ 0.40
• Nickel (Ni): ≤ 0.65
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 360 – 510 MPa
• Yield Strength: ≥ 235 MPa
• Elongation: 26% (for thickness ≤ 16 mm)
Key Features:
• Improved atmospheric corrosion resistance
• Reduced maintenance and painting requirements
• Good strength and toughness balance
• Impact-tested at 0°C
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-5 S235J0W steel sheets along with plates, coils, and strips for weather-exposed structural applications. With improved atmospheric corrosion resistance, reliable mechanical properties, and compliance with EN 10025-5 standards, S235J0W steel sheet is an economical and durable solution for outdoor structural requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100255 #EN100255Steel #EN10025StructuralSteel #EN100255StructuralSteel #WeatheringSteel #AtmosphericCorrosionResistantSteel #CortenEquivalentSteel #S235J0W #S235J2W #S355J0W #S355J2W #S355K2W #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OutdoorSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #WeatherResistantSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100255Supplier #EN100255Manufacturer #EN100255Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100255SteelSupplier #EN100255SteelManufacturer #EN100255SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Material | Alloy Steel |
| Thickness | 1.00 mm |
| Width | 100 mm |
| Grade | S460ML |
| Coil Or Length | Cut Length |
| Usage | Construction, General Engineering, Automotive, Fabrication, Packing |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S275M, S275ML, S355M, S355ML, S420M, S420ML, S460M, S460ML |
EN 10025-4 S460ML is a high-strength thermomechanically rolled fine-grain structural steel grade developed for demanding structural and fabrication applications requiring excellent impact toughness at low temperatures. Supplied in strip, plate, sheet, and coil form, S460ML steel is delivered in thermo mechanically rolled (M) condition, ensuring a refined grain structure, consistent mechanical performance, and reliable low-temperature toughness. This grade complies with the EN 10025-4 standard and is suitable for applications requiring impact testing at −50°C.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-4 S460ML steel strips, along with plates, sheets, and coils.
Forms Available: plate, sheet, coil, strip
Grades Available: S460M, S460ML
Explanation of Designation:
• S – Structural steel
• 460 – Minimum yield strength in MPa
• M – Thermo mechanically rolled delivery condition
• L – Impact test at −50°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.20
• Manganese (Mn): ≤ 1.80
• Phosphorus (P): ≤ 0.030
• Sulphur (S): ≤ 0.030
• Silicon (Si): ≤ 0.50
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 540 – 720 MPa
• Yield Strength: ≥ 460 MPa
• Elongation: 17% (for thickness ≤ 16 mm)
Key Features:
• Excellent impact toughness at −50°C
• Very high yield strength for demanding structures
• Thermo mechanically rolled for uniform fine-grain structure
• Very good weldability with controlled welding procedures
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-4 S460ML steel strips along with plates, sheets, and coils for demanding structural applications. With excellent low-temperature impact performance, thermomechanically rolled delivery, and full compliance with EN 10025-4 standards, S460ML steel strip is a reliable and economical solution for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100254 #EN100254Steel #EN10025StructuralSteel #EN100254StructuralSteel #FineGrainStructuralSteel #ThermomechanicallyRolledSteel #TMCRSteel #S275M #S275ML #S355M #S355ML #S420M #S420ML #S460M #S460ML #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #ThermomechanicallyRolled #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100254Supplier #EN100254Manufacturer #EN100254Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100254SteelSupplier #EN100254SteelManufacturer #EN100254SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Structural Grade | S420M |
| Thickness | 4mm |
| Surface Finish | As Rolled |
| Application | Bridge, Industrial Shed, Tower, Building |
| Standards | EN 10025-4 |
| Width | 1800 mm |
| Length | 6000 mm |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10025-4 S420M is a thermomechanically rolled fine-grain structural steel grade developed for high-strength structural and fabrication applications where superior load-bearing capacity, good toughness, and excellent weldability are required. Supplied in sheet, plate, coil, and strip form, S420M steel is delivered in thermo mechanically rolled (M) condition, ensuring a refined grain structure and stable mechanical properties. This grade complies with the EN 10025-4 standard and is suitable for demanding structural applications.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-4 S420M steel sheets, along with plates, coils, and strips.
Forms Available: plate, sheet, coil, strip
Grades Available: S420M, S420ML
Explanation of Designation:
• S – Structural steel
• 420 – Minimum yield strength in MPa
• M – Thermo mechanically rolled delivery condition
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.18
• Manganese (Mn): ≤ 1.70
• Phosphorus (P): ≤ 0.030
• Sulphur (S): ≤ 0.030
• Silicon (Si): ≤ 0.50
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 520 – 680 MPa
• Yield Strength: ≥ 420 MPa
• Elongation: 19% (for thickness ≤ 16 mm)
Key Features:
• High yield strength for heavy-duty structural applications
• Thermo mechanically rolled for refined fine-grain structure
• Good toughness and strength balance
• Excellent weldability with appropriate procedures
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10025-4 S420M steel sheets along with plates, coils, and strips for high-strength structural applications. With thermomechanically rolled delivery, reliable mechanical properties, and full compliance with EN 10025-4 standards, S420M steel sheet is an excellent choice for demanding engineering and construction requirements. For customized sizes, grade selection, or technical support, contact Ladhani Metal Corporation.
#EN10025 #EN100254 #EN100254Steel #EN10025StructuralSteel #EN100254StructuralSteel #FineGrainStructuralSteel #ThermomechanicallyRolledSteel #TMCRSteel #S275M #S275ML #S355M #S355ML #S420M #S420ML #S460M #S460ML #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #ThermomechanicallyRolled #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100254Supplier #EN100254Manufacturer #EN100254Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100254SteelSupplier #EN100254SteelManufacturer #EN100254SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Material | Alloy Steel |
| Thickness | 1.20 mm |
| Width | 50 mm |
| Grade | S355ML |
| Coil Or Length | Cut Length |
| Usage | Automotive, Fabrication, Packing, Construction, General Engineering |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S275M, S275ML, S355M, S355ML, S420M, S420ML, S460M, S460ML |
EN 10025-4 S355ML is a thermomechanically rolled fine-grain structural steel grade developed for high-strength structural and fabrication applications requiring excellent low-temperature impact toughness. Supplied in strip, plate, sheet, and coil form, S355ML steel is delivered in thermo mechanically rolled (M) condition, ensuring a refined grain structure, consistent mechanical performance, and dependable toughness at low temperatures. This grade complies with the EN 10025-4 standard and is suitable for applications requiring impact testing at −50°C.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-4 S355ML steel strips, along with plates, sheets, and coils.
Forms Available: plate, sheet, coil, strip
Grades Available: S355M, S355ML
Explanation of Designation:
• S – Structural steel
• 355 – Minimum yield strength in MPa
• M – Thermo mechanically rolled delivery condition
• L – Impact test at −50°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.16
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.030
• Sulphur (S): ≤ 0.030
• Silicon (Si): ≤ 0.50
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 470 – 630 MPa
• Yield Strength: ≥ 355 MPa
• Elongation: 22% (for thickness ≤ 16 mm)
Key Features:
• Excellent impact toughness at −50°C
• High yield strength with reliable low-temperature performance
• Thermo mechanically rolled for uniform fine-grain structure
• Very good weldability with controlled welding procedures
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-4 S355ML steel strips along with plates, sheets, and coils for demanding structural applications. With excellent low-temperature impact performance, thermomechanically rolled delivery, and full compliance with EN 10025-4 standards, S355ML steel strip is a reliable and economical solution for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100254 #EN100254Steel #EN10025StructuralSteel #EN100254StructuralSteel #FineGrainStructuralSteel #ThermomechanicallyRolledSteel #TMCRSteel #S275M #S275ML #S355M #S355ML #S420M #S420ML #S460M #S460ML #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #ThermomechanicallyRolled #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100254Supplier #EN100254Manufacturer #EN100254Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100254SteelSupplier #EN100254SteelManufacturer #EN100254SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Structural Grade | S275M |
| Thickness | 6 mm |
| Surface Finish | As Rolled |
| Application | Tower, Building, Industrial Shed, PEB, Bridge |
| Standards | EN 10025-4 |
| Width | 1500 mm |
| Length | 6000 mm |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10025-4 S275M is a thermomechanically rolled fine-grain structural steel grade designed for structural and fabrication applications where good strength, excellent toughness, and uniform mechanical properties are required. Supplied in sheet, plate, coil, and strip form, S275M steel is delivered in thermomechanically rolled (M) condition, providing a refined grain structure and reliable performance. This grade complies with the EN 10025-4 standard and is suitable for structures subjected to moderate and low-temperature service conditions.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10025-4 S275M steel sheets, along with plates, coils, and strips.
Forms Available: sheet, plate, coil, strip
Grades Available: S275M, S275ML
Explanation of Designation:
• S – Structural steel
• 275 – Minimum yield strength in MPa
• M – Thermomechanically rolled delivery condition
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.16
• Manganese (Mn): ≤ 1.50
• Phosphorus (P): ≤ 0.030
• Sulphur (S): ≤ 0.030
• Silicon (Si): ≤ 0.50
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 370 – 510 MPa
• Yield Strength: ≥ 275 MPa
• Elongation: 22% (for thickness ≤ 16 mm)
Key Features:
• Thermomechanically rolled for fine-grain structure
• Good strength combined with excellent toughness
• Improved weldability and formability
• Uniform mechanical properties across thickness ranges
• Suitable for low-temperature structural applications
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-4 S275M steel sheets along with plates, coils, and strips for structural and engineering applications. With thermomechanically rolled delivery, dependable mechanical properties, and compliance with EN 10025-4 standards, S275M steel sheet is a reliable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100254 #EN100254Steel #EN10025StructuralSteel #EN100254StructuralSteel #FineGrainStructuralSteel #ThermomechanicallyRolledSteel #TMCRSteel #S275M #S275ML #S355M #S355ML #S420M #S420ML #S460M #S460ML #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #ThermomechanicallyRolled #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100254Supplier #EN100254Manufacturer #EN100254Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100254SteelSupplier #EN100254SteelManufacturer #EN100254SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Structural Grade | S420NL |
| Thickness | 12 mm |
| Surface Finish | Normalized |
| Application | Bridge, Industrial Shed, Building |
| Standards | EN 10025-3 |
| Width | 1500 mm |
| Length | 6000 mm |
| Manufactured / Supplied by | Ladhani Metal Corporation |
EN 10025-3 S420NL is a high-strength normalized fine-grain structural steel grade intended for demanding structural and fabrication applications where superior strength and excellent impact toughness at very low temperatures are required. Supplied in plate, sheet, coil, and strip form, S420NL steel is delivered in normalized or normalized rolled condition, ensuring a refined grain structure and consistent mechanical performance. This grade complies with EN 10025-3 and is suitable for applications requiring impact testing at −50°C.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10025-3 S420NL steel plates, along with sheets, coils, and strips.
Forms Available: plate, sheet, coil, strip
Grades Available: S420N, S420NL
Explanation of Designation:
• S – Structural steel
• 420 – Minimum yield strength in MPa
• N – Normalized or normalized rolled delivery condition
• L – Impact test at −50°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.20
• Manganese (Mn): ≤ 1.70
• Phosphorus (P): ≤ 0.030
• Sulphur (S): ≤ 0.030
• Silicon (Si): ≤ 0.60
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 520 – 680 MPa
• Yield Strength: ≥ 420 MPa
• Elongation: 19% (for thickness ≤ 16 mm)
Key Features:
• Guaranteed impact toughness at −50°C
• Normalized delivery for uniform and stable properties
• High yield strength for heavy-duty structural applications
• Very good weldability with controlled procedures
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-3 S420NL steel plates along with sheets, coils, and strips for demanding structural applications. With superior low-temperature impact performance, normalized delivery, and compliance with EN 10025-3 standards, S420NL steel plate is a dependable and economical choice for high-strength fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Thickness | 3 mm |
| Material Grade | S275N |
| Width | 900 mm |
| Length | 1800 mm |
| Form | Sheet |
| Country Standards | EN |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S275N, S275NL, S355N, S355NL |
EN 10025-3 S275N is a normalized fine-grain structural steel grade intended for structural and fabrication applications where improved strength, toughness, and uniform mechanical properties are required. Supplied in sheet, plate, coil, and strip form, S275N steel is delivered in normalized or normalized rolled condition, ensuring enhanced notch toughness and consistent performance. This grade complies with EN 10025-3 and is suitable for structures exposed to moderate and low-temperature service conditions.
Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10025-3 S275N steel sheets, along with plates, coils, and strips. Our materials are sourced from approved mills and supplied in normalized condition.
Forms Available: sheet, plate, coil, strip
Grades Available: S275N, S275NL
Explanation of Designation:
• S – Structural steel
• 275 – Minimum yield strength in MPa
• N – Normalized or normalized rolled delivery condition
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.20
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.030
• Sulphur (S): ≤ 0.030
• Silicon (Si): ≤ 0.55
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 370 – 510 MPa
• Yield Strength: ≥ 275 MPa
• Elongation: 22% (for thickness ≤ 16 mm)
Key Features:
• Supplied in normalized or normalized rolled condition
• Improved toughness compared to as-rolled structural steels
• Good weldability with standard welding practices
• Uniform mechanical properties across thickness ranges
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-3 S275N steel sheets along with plates, coils, and strips for structural and engineering applications. With normalized delivery, dependable mechanical properties, and compliance with EN 10025-3 standards, S275N steel sheet is a reliable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Material | Alloy Steel |
| Thickness | 2.00 mm |
| Width | 75 mm |
| Grade | S355J0 |
| Usage | Construction, Fabrication, General Engineering, Automotive, Packing |
| Country Of Origin | India |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S235JR, S235J0, S235J2, S275JR, S275J0, S275J2, S355JR, S355J0, S355J2, S355J2 |
EN 10025-2 S355J0 is a high-strength non-alloy structural steel grade developed for structural and fabrication applications where higher strength and verified impact toughness at lower temperatures are required. Supplied in strip, sheet, plate, and coil form, S355J0 steel offers excellent weldability, good formability, and uniform mechanical properties. This grade complies with the EN 10025-2 standard and is suitable for use in applications requiring impact testing at 0°C.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-2 S355J0 steel strips, along with sheets, plates, and coils. Our materials are sourced from approved mills and supplied in hot-rolled condition, ensuring consistent quality, dimensional accuracy, and full compliance with EN 10025-2 requirements for structural applications.
Forms Available: strip, sheet, plate, coil
Grades Available: S355JR, S355J0, S355J2, S355K2
Explanation of Designation:
• S – Structural steel
• 355 – Minimum yield strength in MPa
• J0 – Impact test at 0°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.24
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
• Silicon (Si): ≤ 0.55
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 470 – 630 MPa
• Yield Strength: ≥ 355 MPa
• Elongation: 22% (for thickness ≤ 16 mm)
Key Features:
• Verified impact toughness at 0°C
• High strength for demanding structural applications
• Excellent weldability using standard welding procedures
• Good formability for bending and fabrication
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-2 S355J0 steel strips along with sheets, plates, and coils for high-strength structural applications. With dependable impact performance at 0°C, excellent weldability, and compliance with EN 10025-2 standards, S355J0 steel strip is a reliable and economical choice for demanding engineering requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100252 #EN100252Steel #EN10025StructuralSteel #EN100252StructuralSteel #S235JR #S275JR #S355JR #S355J2 #StructuralSteelPlate #StructuralSteelSheet #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #HotRolledSteel #LowCarbonSteel #WeldableSteel #MachinableSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN10025Supplier #EN10025Manufacturer #EN10025Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #HeavyEngineering #InfrastructureSteel #CivilEngineeringSteel #ASTMEquivalentSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN10025SteelSupplier #EN10025SteelManufacturer #EN10025SteelExporter #LadhaniMetal#Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Steel Grade | S355J2 |
| Standards | EN 10025-2 |
| Thickness | 6 mm |
| Width | 1500 mm |
| Length | 6000 mm |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S235JR, S235J0, S235J2, S275JR, S275J0, S275J2, S355JR, S355J0, S355J2, S355J2 |
EN 10025-2 S355J2 is a high-strength non-alloy structural steel grade designed for structural and fabrication applications requiring superior strength and reliable impact toughness at low temperatures. Supplied in sheet, plate, coil, and strip form, S355J2 steel offers excellent weldability, good formability, and uniform mechanical properties. This grade conforms to the EN 10025-2 standard and is suitable for use in applications where impact testing at −20°C is specified.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-2 S355J2 steel sheets, along with plates, coils, and strips. Our materials are sourced from approved mills and supplied in hot-rolled condition, ensuring consistent quality, dimensional accuracy, and full compliance with EN 10025-2 requirements for structural applications.
Forms Available: sheet, plate, coil, strip
Grades Available: S355JR, S355J0, S355J2, S355K2
Explanation of Designation:
• S – Structural steel
• 355 – Minimum yield strength in MPa
• J2 – Impact test at −20°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.24
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
• Silicon (Si): ≤ 0.55
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 470 – 630 MPa
• Yield Strength: ≥ 355 MPa
• Elongation: 22% (for thickness ≤ 16 mm)
Key Features:
• Verified impact toughness at −20°C
• High strength for demanding structural applications
• Excellent weldability using standard welding procedures
• Good formability for bending and fabrication
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-2 S355J2 steel sheets along with plates, coils, and strips for high-strength and low-temperature structural applications. With excellent weldability, dependable impact performance at −20°C, and full compliance with EN 10025-2 standards, S355J2 steel sheet is a reliable and economical choice for demanding engineering projects. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100252 #EN100252Steel #EN10025StructuralSteel #EN100252StructuralSteel #S235JR #S275JR #S355JR #S355J2 #StructuralSteelPlate #StructuralSteelSheet #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #HotRolledSteel #LowCarbonSteel #WeldableSteel #MachinableSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN10025Supplier #EN10025Manufacturer #EN10025Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #HeavyEngineering #InfrastructureSteel #CivilEngineeringSteel #ASTMEquivalentSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN10025SteelSupplier #EN10025SteelManufacturer #EN10025SteelExporter #LadhaniMetal#Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Steel Grade | S235J0 |
| Thickness | 4 mm |
| Standards | EN 10025-2 |
| Width | 1500 mm |
| Length | 6000 mm |
| Usage | General Purpose, Fabrication, Structure |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S235JR, S235J0, S235J2, S275JR, S275J0, S275J2, S355JR, S355J0, S355J2, S355J2 |
EN 10025-2 S235J0 is a low carbon structural steel grade designed for general structural applications in construction, fabrication, and engineering projects. Supplied in sheet, plate, coil, and strip form, S235J0 steel offers excellent weldability, good formability, and uniform mechanical properties, making it suitable for components that require moderate strength and verified impact performance at lower temperatures. This grade is part of the EN 10025-2 standard for non-alloy structural steels.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-2 S235J0 steel sheets, plates, coils, and strips. Our materials are sourced from approved mills and supplied in hot-rolled condition, ensuring consistent quality, dimensional accuracy, and compliance with EN 10025-2 standards for structural applications.
Forms Available: sheet, plate, coil, strip
Grades Available: S235JR, S235J0, S235J2, S235K2
Explanation of Designation:
• S – Structural steel
• 235 – Minimum yield strength in MPa (other options include 185, 275, 355)
• J0 – Impact test at 0°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.20
• Manganese (Mn): ≤ 1.40
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
• Silicon (Si): ≤ 0.55
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 360 – 510 MPa
• Yield Strength: ≥ 235 MPa
• Elongation: 26% (for thickness ≤ 16 mm)
Key Features:
• Excellent weldability using standard welding processes
• Good formability and ease of fabrication
• Uniform mechanical properties across thickness ranges
• Suitable for moderate temperature and low-stress structural applications
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-2 S235J0 steel in sheet, plate, coil, and strip forms for structural and fabrication applications. With excellent weldability, verified impact performance at 0°C, and compliance with EN 10025-2 standards, S235J0 is a reliable and economical choice for general structural engineering projects. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100252 #EN100252Steel #EN10025StructuralSteel #EN100252StructuralSteel #S235JR #S275JR #S355JR #S355J2 #StructuralSteelPlate #StructuralSteelSheet #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #HotRolledSteel #LowCarbonSteel #WeldableSteel #MachinableSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN10025Supplier #EN10025Manufacturer #EN10025Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #HeavyEngineering #InfrastructureSteel #CivilEngineeringSteel #ASTMEquivalentSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN10025SteelSupplier #EN10025SteelManufacturer #EN10025SteelExporter #LadhaniMetal#Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Steel Grade | S235J0 |
| Thickness | 1mm |
| Standards | EN 10025-2 |
| Length | 4000 |
| Usage | General Purpose, Fabrication, Structure |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S235JR, S235J0, S235J2, S275JR, S275J0, S275J2, S355JR, S355J0, S355J2, S355J2 |
EN 10025-2 S235J0 is a low carbon structural steel grade designed for general structural applications in construction, fabrication, and engineering projects. Supplied in coil, sheet, plate, and strip form, S235J0 steel offers excellent weldability, good formability, and uniform mechanical properties, making it suitable for components that require moderate strength and verified impact performance at lower temperatures. This grade is part of the EN 10025-2 standard for non-alloy structural steels.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-2 S235J0 steel coils, sheets, plates, and strips. Our materials are sourced from approved mills and supplied in hot-rolled condition, ensuring consistent quality, dimensional accuracy, and compliance with EN 10025-2 standards for structural applications.
Forms Available: coil, sheet, plate, strip
Grades Available: S235JR, S235J0, S235J2, S235K2
Explanation of Designation:
• S – Structural steel
• 235 – Minimum yield strength in MPa (other options include 185, 275, 355)
• J0 – Impact test at 0°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.20
• Manganese (Mn): ≤ 1.40
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
• Silicon (Si): ≤ 0.55
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 360 – 510 MPa
• Yield Strength: ≥ 235 MPa
• Elongation: 26% (for thickness ≤ 16 mm)
Key Features:
• Excellent weldability using standard welding processes
• Good formability and ease of fabrication
• Uniform mechanical properties across thickness ranges
• Suitable for moderate temperature and low-stress structural applications
• Cost-effective solution for general structural projects
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-2 S235J0 steel coils in coil, sheet, plate, and strip forms for structural and fabrication applications. With excellent weldability, verified impact performance at 0°C, and compliance with EN 10025-2 standards, S235J0 is a reliable and economical choice for general structural engineering projects. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100252 #EN100252Steel #EN10025StructuralSteel #EN100252StructuralSteel #S235JR #S275JR #S355JR #S355J2 #StructuralSteelPlate #StructuralSteelSheet #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #HotRolledSteel #LowCarbonSteel #WeldableSteel #MachinableSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN10025Supplier #EN10025Manufacturer #EN10025Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #HeavyEngineering #InfrastructureSteel #CivilEngineeringSteel #ASTMEquivalentSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN10025SteelSupplier #EN10025SteelManufacturer #EN10025SteelExporter #LadhaniMetal#Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Material | Alloy Steel |
| Grade | S275J0 |
| Thickness | 5 mm |
| Width | 1000 mm |
| Length | 3660 mm |
| Country Of Origin | India |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S235JR, S235J0, S235J2, S275JR, S275J0, S275J2, S355JR, S355J0, S355J2, S355J2 |
EN 10025-2 S275J0 is a low carbon structural steel grade designed for general structural and fabrication applications where improved impact toughness at lower temperatures is required. Supplied in sheet, plate, coil, and strip form, S275J0 steel offers higher strength than S235 grades along with excellent weldability, good formability, and uniform mechanical properties. This grade complies with the EN 10025-2 standard for non-alloy structural steels and is suitable for use in environments where impact performance at 0°C is specified.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-2 S275J0 steel sheets, plates, coils, and strips. Our materials are sourced from approved mills and supplied in hot-rolled condition, ensuring consistent quality, dimensional accuracy, and full compliance with EN 10025-2 requirements for structural applications.
Forms Available: sheet, plate, coil, strip
Grades Available: S275JR, S275J0, S275J2, S275K2
Explanation of Designation:
• S – Structural steel
• 275 – Minimum yield strength in MPa
• J0 – Impact test at 0°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.22
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
• Silicon (Si): ≤ 0.55
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 410 – 560 MPa
• Yield Strength: ≥ 275 MPa
• Elongation: 23% (for thickness ≤ 16 mm)
Key Features:
• Verified impact toughness at 0°C
• Excellent weldability using standard welding procedures
• Good formability for bending and fabrication
• Higher strength compared to S235 grades
• Uniform mechanical properties across thickness ranges
• Available in sheet, plate, coil, and strip forms
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-2 S275J0 steel sheets along with plates, coils, and strips for structural and fabrication applications. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100252 #EN100252Steel #EN10025StructuralSteel #EN100252StructuralSteel #S235JR #S275JR #S355JR #S355J2 #StructuralSteelPlate #StructuralSteelSheet #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #HotRolledSteel #LowCarbonSteel #WeldableSteel #MachinableSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN10025Supplier #EN10025Manufacturer #EN10025Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #HeavyEngineering #InfrastructureSteel #CivilEngineeringSteel #ASTMEquivalentSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN10025SteelSupplier #EN10025SteelManufacturer #EN10025SteelExporter #LadhaniMetal#Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Steel Type | Alloy Steel |
| Thickness | 1.00 mm |
| Width | 600 mm |
| Grade | S355JR |
| Application | Automotive, General Engineering, Structure, Pipes, Panels, Roofing, Fabrication |
| Form | Coil |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S235JR, S235J0, S235J2, S275JR, S275J0, S275J2, S355JR, S355J0, S355J2, S355J2 |
EN 10025-2 S355JR is a high-strength non-alloy structural steel grade designed for demanding structural and fabrication applications where higher load-bearing capacity is required. Supplied in coil, sheet, plate, and strip form, S355JR steel offers excellent weldability, good formability, and superior mechanical properties compared to S235 and S275 grades. This grade complies with the EN 10025-2 standard and is suitable for general structural use under normal atmospheric conditions.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-2 S355JR steel coils, sheets, plates, and strips. Our materials are sourced from approved mills and supplied in hot-rolled condition, ensuring consistent quality, dimensional accuracy, and full compliance with EN 10025-2 requirements for structural applications.
Forms Available: coil, sheet, plate, strip
Grades Available: S355JR, S355J0, S355J2, S355K2
Explanation of Designation:
• S – Structural steel
• 355 – Minimum yield strength in MPa
• JR – Impact test at +20°C
• J0 – Impact test at 0°C
• J2 – Impact test at −20°C
• K2 – Impact test at −20°C with higher impact energy (40 J)
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.24
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.035
• Sulphur (S): ≤ 0.035
• Silicon (Si): ≤ 0.55
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 470 – 630 MPa
• Yield Strength: ≥ 355 MPa
• Elongation: 22% (for thickness ≤ 16 mm)
Key Features:
• Higher strength compared to S235 and S275 grades
• Excellent weldability using standard welding processes
• Good formability for rolling and fabrication
• Uniform mechanical properties across thickness ranges
Conclusion:
Ladhani Metal Corporation supplies high-quality EN 10025-2 S355JR steel coils along with sheets, plates, and strips for high-strength structural applications. With excellent weldability, superior mechanical properties, and compliance with EN 10025-2 standards, S355JR steel coil is a reliable and economical choice for demanding engineering projects. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100252 #EN100252Steel #EN10025StructuralSteel #EN100252StructuralSteel #S235JR #S275JR #S355JR #S355J2 #StructuralSteelPlate #StructuralSteelSheet #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #HotRolledSteel #LowCarbonSteel #WeldableSteel #MachinableSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN10025Supplier #EN10025Manufacturer #EN10025Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #HeavyEngineering #InfrastructureSteel #CivilEngineeringSteel #ASTMEquivalentSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN10025SteelSupplier #EN10025SteelManufacturer #EN10025SteelExporter #LadhaniMetal#Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Steel Grade | S690QL2 |
| Yield Strength | 690 MPa |
| Thickness | 0.5mm |
| Width | 1000 mm |
| Standards | EN 10025-6 |
| Length | 6000 mm |
| Heat Treatment | Quenched Tempered |
| Application | Heavy Structure, Mining Equipment |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S690QL, S690QL1, S690QL2, S890QL, S890QL1, S960QL |
EN 10025-6 S690QL2 is a high-strength quenched and tempered fine-grain structural steel grade developed for applications requiring exceptional yield strength, superior toughness, and reliable performance under heavy and dynamic loads. Supplied in coil, plate, sheet, and strip form, S690QL2 steel undergoes a quenching and tempering heat treatment to achieve an optimized combination of strength, ductility, and impact toughness. This grade complies with the EN 10025-6 standard and is suitable for demanding structural and engineering applications requiring impact performance at −60°C.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-6 S690QL2 steel coils, along with plates, sheets, and strips. Our materials are sourced from approved mills and supplied in full compliance with EN 10025-6 specifications, ensuring dimensional accuracy, consistent quality, and reliable high-strength performance.
Forms Available: plate, sheet, coil, strip
Grades Available: S690QL2
Explanation of Designation:
• S – Structural steel
• 690 – Minimum yield strength in MPa
• Q – Quenched
• L2 – Thermo-mechanically treated with impact toughness at −60°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.22
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
• Silicon (Si): ≤ 0.50
• Chromium (Cr): ≤ 0.30
• Nickel (Ni): ≤ 0.65
• Molybdenum (Mo): ≤ 0.25
• Vanadium (V): ≤ 0.12
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 740 – 900 MPa
• Yield Strength: ≥ 690 MPa
• Elongation: 12% (for thickness ≤ 16 mm)
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10025-6 S690QL2 steel coils along with plates, sheets, and strips for demanding high-strength and low-temperature structural applications. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100256 #EN100256Steel #EN10025StructuralSteel #EN100256StructuralSteel #QuenchedAndTemperedSteel #HighStrengthStructuralSteel #S690QL #S690QL1 #S690QL2 #S890QL #S890QL1 #S960QL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #HeavyEngineeringSteel #CranesSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #QuenchedTemperedSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100256Supplier #EN100256Manufacturer #EN100256Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100256SteelSupplier #EN100256SteelManufacturer #EN100256SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj
Product Details:
| Steel Grade | S690QL1 |
| Yield Strength | 690 MPa |
| Thickness | 8 mm |
| Standards | EN 10025-6 |
| Width | 1500 mm |
| Length | 4000 mm |
| Heat Treatment | Quenched Tempered |
| Application | Mining Equipment, Crane, Heavy Structure |
| Manufactured / Supplied by | Ladhani Metal Corporation |
| Material Grades | S690QL, S690QL1, S690QL2, S890QL, S890QL1, S960QL |
EN 10025-6 S690QL1 is a high-strength quenched and tempered fine-grain structural steel grade developed for applications requiring exceptional yield strength, excellent toughness, and reliable performance under heavy and dynamic loads. Supplied in plate, sheet, coil, and strip form, S690QL1 steel undergoes a quenching and tempering heat treatment to achieve superior mechanical properties, including high strength, good ductility, and impact toughness. This grade complies with the EN 10025-6 standard and is suitable for demanding structural and engineering applications.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-6 S690QL1 steel plates, along with sheets, coils, and strips. Our materials are sourced from approved mills and supplied in full compliance with EN 10025-6 specifications, ensuring dimensional accuracy, uniform quality, and reliable high-strength performance.
Forms Available: plate, sheet, coil, strip
Grades Available: S690QL1
Explanation of Designation:
• S – Structural steel
• 690 – Minimum yield strength in MPa
• Q – Quenched
• L1 – Thermo-mechanically treated with impact toughness at −40°C
Chemical Composition (% – typical limits):
• Carbon (C): ≤ 0.22
• Manganese (Mn): ≤ 1.60
• Phosphorus (P): ≤ 0.025
• Sulphur (S): ≤ 0.025
• Silicon (Si): ≤ 0.50
• Chromium (Cr): ≤ 0.30
• Nickel (Ni): ≤ 0.65
• Molybdenum (Mo): ≤ 0.25
• Vanadium (V): ≤ 0.12
Mechanical Properties (Typical, vary by thickness):
• Tensile Strength: 740 – 900 MPa
• Yield Strength: ≥ 690 MPa
• Elongation: 12% (for thickness ≤ 16 mm)
Conclusion:
Ladhani Metal Corporation supplies premium quality EN 10025-6 S690QL1 steel plates along with sheets, coils, and strips for demanding high-strength structural applications. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.
#EN10025 #EN100256 #EN100256Steel #EN10025StructuralSteel #EN100256StructuralSteel #QuenchedAndTemperedSteel #HighStrengthStructuralSteel #S690QL #S690QL1 #S690QL2 #S890QL #S890QL1 #S960QL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #HeavyEngineeringSteel #CranesSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #QuenchedTemperedSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100256Supplier #EN100256Manufacturer #EN100256Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100256SteelSupplier #EN100256SteelManufacturer #EN100256SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj